I have dsl and want to hook up wireless router to run 2 computers when i plug into th router i have no connection at all'

Have you tried to reset router. It has to be done in order.
1. unplug router
2. unplug modem
3. shut down computer and restart after waiting 1 min
4. after restarting computer plug power back into modem and wait for all the lights to start blinking
5. after the modem is working plug power back to router and plug in the computer with ethernet cable and make sure you have internet,
6. try to link up with wireless,
If this does not work you will have to setup the router for wireless if it is att wireless you will have to call them to give you the password to set it up.

You need the Network Adapter and you have to sign up and pay money/ month
http://au.ps2.ign.com/articles/366/366021p1.html
f you are hooking it up to a DSL cable/modem,
1. Remove the sticker covering the network connector on the Network Adaptor and
plug your Ethernet cable in the connector labeled NETWORK.
2. Plug the AC power cord for the PlayStation2 system into an electrical outlet.
3. Turn on the PlayStation2 system and start the Network Adaptor Start-up Disc.
If you are hooking it up to a router:
1. Remove the sticker covering the network connector of the Network Adaptor.
2. Connect an Ethernet network cable from the NETWORK connector of the Network Adaptor to an available LAN port of the router.
3. Connect the WAN port of the router to the DSL or cable modem.
4. Connect a personal computer (not pictured) to an available LAN port of the
router. Use a web browser on the PC to set up the router to reach the
Internet.
5. Follow the specific instructions that come with the router. There is no additional installation for switches.
If you are hooking it up to a LAN:
1. Remove the sticker covering the network connector of the Network Adaptor.
2. Connect an Ethernet network cable from the NETWORK connector of the Network Adaptor to a wireless Ethernet bridge.
3. Connect the WAN port of the wireless router to the DSL or cable modem.
4. Connect a personal computer to the router. Use a web browser on
the PC to set up the router to reach the Internet.
5. Follow the specific instructions that come with the router.
For pictures, see the thread here:
http://www.funadvice.com/r/3js7klmkua

Connect your DSL to wireless router and enable automatic ip on wireless. check whether DHCP is enable in DSL router or not.

Pleaase check if the PC connects when plugged directly to the DSL or cable connection whatever you have without the router in between. That would ensure the functionality of the ethernet card on the other pc.

Hi Cheryl,

From your cable/dsl modem please take the cable that comes out of it that looks slightly larger than a phone cable and plug it into a port on your NetGear Wireless Router that is labeled either Internet or WAN. After that is done, unplug the power to both your cable/dsl modem and your wireless router. Plug the power back into the cable/dsl modem and wait about 30 seconds then do the same with the wireless router.

Next on your computer, there should be a wireless icon by your clock near the bottom right corner of the screen. If you double on it, you will see a list of connections, yours will say Netgear and should have a good signal strength. Double on it and give it about 10 seconds to connect. Voila, you should be on the Internet.

Please let me know if this solves your problem.

Thanks,
Adam

first you connect the wire from the wall into the wan port in the back of your dsl modem. next you connect the outsource wire from your dsl modem into the wan port on your router. next put another rj45 wire into the number one port in the back of your router and the other to your computer. put another wire into number 2 and then to your xbox. everything need to be unplugged while you are hooking it up. once done power cycle...meaning plug up the dsl and wait for the lights to stay lit. then the router. the start your computer. if you want to go wireless just get a usb wireless network adaptor and there you are

HI,
The problem can be caused, because of two reasons, one the router profile on the computer has got corrupted and second the router itself. Have you tried resetting the router to factory defaults.. Caution: all wireless security settings and user name and passwords would go back to factory defaults.

1.Disconnect all cable from the back of the router.
2. Shut down your computer and the DSL box
3.Press the reset button, using a paper clip at the back of the router.Keep it pressed for 5 seconds
4. Disconnect the power cord to the router
5. Switch on the Dsl box, wait for the lights to stablize
6. Reconnect the interenet cable and the power cable to the router and power it on.
7 Let the lights stabalise on the router and power on the computer.

Check if that resolves the problem, if not we might need to update the router.


Thanks
Proton

It is always a good thing to start the different peripherals in an order. First, you start your modem. Wait 30 seconds. Then, start the router; wait another 30 seconds; then the computer.

Are you running a DSL connection, or is it cable? If you have a DSL connection, the router IP and the DSL modem will conflict with each other trying to establish connection. This may be something to call zonenet customer support on to find out if it is possible to change the router IP address so they don't conflict. If you want to basically "PLUG and PLAY" return the zonenet router and get a D-Link wireless router. They are most compatable with DSL connections.

I just worked on one of these today. Try this and see if it helps.

1. Unplug your cable or DSL modem and your wireless router

2. Plug back in the cable or DSL modem and wait for the internet to successfully connect (watch the lights).

3. Plug the wireless router back in again and wait for it to connect (again, watching the lights)


If this doesn't work, make sure you have the equipment plugged-in in the right order.

cable or dsl signal goes to modem ==> modem plugs into wireless router ===> computer plugs into wireless router.