Question about Motorola Mobility DRC800 Universal Remote Control
Ihave a motorola drc800 universal remote and i need a code for my durabrand dvd player model#dvd1002. can u help me?
Hi go here for the complete usermanual, and try this following.
If none of the codes listed under
“Device Codes”on the back of this
guide match your device, you can
search for a set of commands that will
work. Your remote will sample all the
codes in its system for that device
mode to find one that will allow you to
control your device.
1. Press and hold a device mode
key (AUDIO, DVD/VCR, or TV) for
at least six seconds. The LED for
each device key lights up, then
the key for the device you
selected remains on.
2. Press a function key (such as
Power or Mute). The following
function keys are valid for
Searching (Power is
• CH +
The device key’s LED blinks
three times, then turns off.
3. Press !. The remote will send
the IR command for the function
you pressed in Step 2.
4. If the device performed the
function you pressed, press OK.
The remote will now control the
device you selected in Step 1.
If the device did not perform the
function you pressed, repeat step
3. Press " to retry the previous code
I hope this helps
Please rate accordingly
Posted on May 04, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jun 14, 2012 | Motorola Mobility DRC800 Universal Remote...
Apr 10, 2009 | Motorola Mobility DRC800 Universal Remote...
Jan 13, 2009 | Philips Universal PH301S Remote Control
Jan 08, 2008 | Motorola Mobility DRC800 Universal Remote...
Oct 23, 2007 | Durabrand DVD-1002 DVD Player
1,847 people viewed this question
Usually answered in minutes!