I have a deep fryer. The heating element does not

How do remove heating element 2 clean chefs mark deep fryer Google Search ..try this link might help you out

In order to remove the heating element of a Cuisinart deep fryer you need to do the following:

1. Unplug the fryer.
2. Tip the fryer and put the oil into a container.
3. Put the fryer on its side, with the open top over the sink and a bowl in the sink beneath it. Leave it this way so most of the rest of the oil can drain.
4. Wipe the inside of the fryer with a paper towel.
5. Put several layers of newspaper on the counter and stand the electric deep fryer upside down on top of the paper. You will see that there are rubber feet under the base held in by screws.
6. Remove the feet and screws and you will be able to take off the base to expose the electrical workings inside.
7. Locate the heating element which has wires leading to it. Start by removing the wires leading to it and then loosen up and remove the heating element itself.

Hi there.
You will be able to locate the nearest authorized parts dealer in your area when you visit http://www.t-falusa.com
Regards.

thermostat

Where can i purchase this part ? heating element therostat controller for GE #PL 1215.

send me an email at [email protected] , we are factory in China that produce heating elements. :-)

Contact Maximatic and ask the replacement, use the contact form here.

i have the same question

I have Bravetti Platinum Pro Deep Fryer model EP65 but my heating element was damaged, I debating to sell parts or try to find a new heating element.

yes it is and that is the way it works