Question about Quantum Guardian 4400 120 GB Hard Drive Array

3 Answers

Qwanum guardian 4400 server type 480 GB

I have a Quantum ( Adaptec) Guardian 4400 server and i cannot optain the right IP adres from the server. On my workstation i have installed the server manager bud i cannot connect.I see a serial port in the back of the server can i with hyperterminal connect to it possebly to update the Guardian software.??Who can help me with this problem.

THNX Remco Postma.


Posted by on

3 Answers

Re: qwanum guardian 4400 server type 480 GB


I tried hyperterminal it works very good and i see my computer starting up it works very good.
The problems i see now are that there is no Guardian OS installed on the the system is looking for an OS he cannot find it and the system hangs,

Do someone know how i can get Guardian OS to install?

Posted on Dec 31, 2007

Re: qwanum guardian 4400 server type 480 GB

Thanxx for posting it.Sebastian.
I Want to try the same procedure as you discribe.
I post you back to let you know if the router works.

Posted on Dec 30, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: qwanum guardian 4400 server type 480 GB

I had the same problem with a NAS device. I opened it up and removed the battery and all power sources. I then waited a few minutes and put everything back. The system reset to factory defaults. It now works for me.

I later found out the unit has three ethernet ports. and if the settings are incorrect then the "Gateway" is not found. You may want to connect it directly to a router and see if it gets an ip.

I've tried hyperterminal and it didnt work. There are too many parameters that can interefere.

Posted on Dec 28, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Need delault ip address

click start type cmd press enter you will be in DOS mode

type in ipconfig press enter

you will see all of your internet connection details

or type in your default gateway adress into your internet search should read something like to get an inertnet connection

hope this helps you

Apr 15, 2012 | Buffalo Technology HS-DH320GL 320 GB...

1 Answer

How do i reset the administrator password on a quantum dx5000

I must be honest I dont know the answer as this server is not my forte but here is a link which is a pdf document which might help in resolving the admin password which was set by the IT

here it is

Mar 01, 2011 | Quantum DX5000

1 Answer

I have a FIA POPNETSERVER 4600 with no Software or Docs HELP!!!

The IP-address probably is provided by a DHCP-server on your network. Login to that DHCP-server, and look at the list of "active" clients, i.e., computers that have obtained an IP-address from the DHCP-server. One of the IP-addresses should be allocated to your FIA box.

Rather than "flatten-and-rebuild", you probably should investigate new software and new hardware to replace it, *BEFORE* it "dies", forcing you into a "panic-repair" situation, i.e., you need a "BCP" (Business Continuation Plan) which proactively addresses the non-availability of your "unmanageable" server.

Apr 08, 2010 | FIA Storage Systems Group POPnetserver...

1 Answer

I have a yellow machine p400t and i need to give it a static IP address and do this through a linksys router. how do i go about this? do i need to attach it to a computer?

Yes, it must be attached to the network 0. Install the yellow machine software on the PC 1.Log on to the Yellow Machine Manager. Go to “Logging On To Yellow Machine Manager” on page 8. 2.From the Yellow Machine Manager, click Network > Network Interfaces. The Network Interfaces window appears. 3.Click Edit. 4.Select Yes to Enable LAN Interface. Default: Yes (Enabled) • If you select No, all other LAN option fields are blocked. • If you disable the LAN Interface, the only access to the Yellow Machine appliance is through the WAN port. Anthology Solutions does not recommend this configuration. 5.Check Enable DHCP Service if the DHCP service is needed for the PCs attached to the Yellow Machine appliance’s LAN ports. This setting makes the Yellow Machine appliance the DHCP server for your LAN (or sub-network), providing IP addresses dynamically for the clients connected to the LAN ports. Default: Checked (Disabled) 6.Select either Obtain IP Address Automatically from DHCP Server, or Static IP Address. Default: Static IP Address • Choose Obtain IP Address Automatically from DHCP Server if your Yellow Machine appliance connects to either a router that has DHCP service enabled or to a cable modem. This setting makes the Yellow Machine appliance a DHCP client on your network. • Obtain IP Address from ADSL provider is greyed out. • Choose Static IP Address if your network is locally defined and controlled and does not use DHCP services. Type the IP address manually. 7.Specify IP address and Subnet mask if you selected a Static IP Address, and click Apply. 8.Click Yes to confirm, No to abort. The changes takes affect within five seconds after the network interface change notice appears.

Jan 26, 2010 | Anthology Solutions Yellow Machine P400T...

1 Answer

How do I configure it?

Use its ip address or its snap# to browse into it using Internet Explorer ( http://snap30123 ).The default log in is administrator and no password.
If the password is changed, hold down the reset button for 15 seconds and it shoud reset to default.

Jan 25, 2010 | Quantum Snap Server 4000 (5325301085) 30...

2 Answers

Hello , HP Proliant Server Problem.

Use a different monitor and connect it directly to the server, if problem persist you have a problem with the systemboard or microprocessor.

Jun 29, 2009 | HP ProLiant DL380 G4 36 GB Network Storage...

1 Answer

Cable/Transformer for Quantum Server 1000

I've got the same Snap Server 1000 and lost the supply some time ago - I found a LiteOn monitor supply model PA-1400-02 does the trick and fits exactly.

Spec is 3.33A 12Volts DC out, positive inner, negative outer.

Hope that helps.

Jan 19, 2009 | Quantum Snap Server 1000 (5325301081) 10...

1 Answer

NAS 200 D 480 Gb , it doesn't boot: how to recover data from second partition

Ok,Download software for recover your data from Memory Card, Phone, HDD or any other Storage Device ----
Download from the following link ------

Note- this software is works only with windows operating system so, connect your Memory Card, Phone, HDD or any other Storage Device to computer to recover data.

For any other help contact me.


Feb 18, 2008 | Iomega 200D (33060) 160 GB Network Storage...

1 Answer

Help please to restore the failed raid

Well if your data is gone at this point, you mines well just proceed with rebuilding a new RAID 5 set with your replacement drive. Even if one drive fails in a RAID 5 set, your logical drive should still be accessible. Goodluck.

Jun 14, 2007 | Quantum Guardian 4400 120 GB Hard Drive...

Not finding what you are looking for?
Quantum Guardian 4400 120 GB Hard Drive Array Logo

Related Topics:

416 people viewed this question

Ask a Question

Usually answered in minutes!

Top Quantum Network Storage Systems Experts


Level 3 Expert

413 Answers

Brad Brown

Level 3 Expert

13362 Answers

Daily Mehdi
Daily Mehdi

Level 2 Expert

48 Answers

Are you a Quantum Network Storage System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides