Question about Whirlpool Cabrio WTW6600SBT Top Load Washer

1 Answer

Hi, I have an Imperial Series Heavy Duty Whirlpool top load washer when I wash in cold water the water trickles out, when I change it to hot/warm it works fine, pouring out strong. Help, I need cold for my colors.

Posted by on

  • kimboyl Oct 16, 2009

    Not the problem Wiz but thanks. Actually I should have included that I've checked the water control valve as well as the hose and the screen at the end of the hose. The valve is on full force and the hose and screen wasn't blocked. Any other suggestions. The model is LA9680XWNO.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 715 Answers

Water control valve

Posted on Oct 08, 2009

  • Doug Connell Oct 16, 2009

    look for a kink in the water lines that go from valve to machine.do you have good water pressure at hook up how old is machine?

  • Doug Connell Oct 16, 2009

    also make sure your water lines are connected to the right hookup on machine might try reversing lines to see what happens

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool heavy duty series 8 won't fill on either hot cold or warm?


Shane, We are sorry to hear about your Washer not filling. Please make sure that both the hot and cold water valves are both on and open and that there are no kinks in the hoses. If after you check those things you are still needing assistance then can you please email your your address, phone number, the model and serial number, the website you were contacted on, Fixya, your review ID, and date of purchase to Whirlpool_Digital@whirlpool.com?

Jun 15, 2017 | Whirlpool Washing Machines

1 Answer

The water fills very slowly on rinse


You probably have a cold inlet valve with restricted flow, either because the filter on the inlet valve is clogged or because the cold valve is failing......If you wash on "warm" you have both hot and cold water mixed. On rinse there is probably only cold water used....Check water flow for HOT and COLD settings and you'll probably see the difference...Good luck...Nomess

May 23, 2010 | Whirlpool LSR5132PQ Top Load Washer

2 Answers

Washer does not allow hot water to enter machine when you press the heavy duty button. Regular warm cycle or hot works fine. Replaced the water valves, main control panel.


Hi,

This is a common question we face daily. Certain washing machines allow hot water to enter only during certain cycles. Others allow hot and cold to enter intermittently. Consult your owner's manual to be absolutely sure about this. If you're sure the machine isn't working the way it used to--or should--try these tests:
Is the hot water turned on? If not, turn it on.
Is the washer getting cold water but no hot water? If so, check to see if the control panel
settings are correct.

Thanks for writing to Fixya.com and I am Aparajita. I will be assisting you today.

Mar 22, 2010 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

I have an old Kenmore Heavy Duty 70 series washer.


its a filter inside the water hose thats still blocked or the relay inside the washer for the cold feed is not opening up fully it could just need a clean or maybe a new one fitted

Nov 05, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore Washer 90 series cold water trickle


Hi, You need to remove the fill hose and see what is plugging the inlet valve screen. This should make a guge difference.
Please let me knwo ig I can assist you further.

Thanks
Vic

May 23, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Hot water doesnt work, switch to warm and warm comes out.


If the cold works on cold wash but the hot don't work on hot wash . Then yes the switch is bad.give What model is it?

Jan 16, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Slow cold water only fill kenmore heavy duty 70 902202


remove fill hoses and inspected for debris or cloggs ,,,,

Dec 30, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Cold water filling


There are filter screens where the supply hoses connect to the washer. On some brands there is a screen where the hose connects to the water valve at the wall. The screen is probably full of sediment.

Dec 14, 2008 | Kenmore 24622 Top Load Washer

3 Answers

Kenmore heavy duty washing machine 70 series


The most likely cause for water fill temperature problems is the solenoid has burned out, usually cold first, it gets used more. Not a repairable item , easy to replace

Dec 30, 2007 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Whirlpool Cabrio WTW6600SBT Top Load Washer Logo

447 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...