Question about Dishwashers

Open Question

Need a manual for TDS6-F1 dishwasher - Dishwashers

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Dishwasher error f1

The manual states that fault code F1 means that the flood switch has been activated. They recommend turning off the water and power to the unit and calling them. Their phone number is: 1.888.936.787

Nov 26, 2013 | Fisher and Paykel DishDrawer DS605FDSM...

1 Answer

Need an english manual for teka dishwasher dw6 59 f1 please

By maggiegardne on Nov 20, 2010
need an english manual for teka dishwasher dw6 59 f1 please

Nov 20, 2010 | Dishwashers

2 Answers

Hi, I have missed place my manuel for my dishwasher. It is a single-draw stainless steel, model DS603. The problem I have is F1 is showing on the control panel and it has a beeping sound. How do I rectify...

The manual for your unit is available on

However, this will give you only the reason for the F1 fault code but not the causes for it.

This occurs when the flood switch at the base of the dishwasher (under the drawer) is activated. This is because there is some water gone into the base of the unit.

Causes can be - leak in the drain hose (that is at the back of the drawer) or too much foam in detergent or simply water spilling from over the drawer.

If there is a leak in drain hose then this needs to be replaced.

Parts manual is available for your unit at

You might be able to source it locally.

To get rid of the F1 - switch off the dishwasher power.
Extend the drawer out as much as possible and dry out the base with towels and hair dryer. The location of the flood switch is shown in the parts manual in case you are interested. Turn the power on and hopefully it was a once of problem.

Good luck

Jan 25, 2010 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

E-mail for Fisher Paykel DD603 manual

Josh, you will need to have a Tech out to look at it... F/P will not sell you parts to repair it. The F1 indicates that the flood switch has been tripped. There are many possible causes for this but probably the upper drawer link support has broken and is getting stuck between the lid and the drawer in which case you will need a new lid and link support.

May 05, 2009 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

F1 Error code on fisher paykel softouch dishwasher

F1 means that water is in your basepan--- you can pull the bottom drawer out and soak up the water with a towel... you will have to use a hair dryer to dry underneath the control sensor in the back left corner.

Apr 11, 2009 | Fisher Dishwashers

1 Answer

Fisher & Paykel single drawer dishwasher F1 flashing.

F1 indicates a problem with the Flood sensor. I cleaned all the filters etc. removed the drawer viewed under the drawer, it was dry. There is nothing further I can do, so called the Appliances repair person and booked an appointment for him to determine if an outlet hose is blocked or has a hole in it or whatever. Thanks for all the suggestions Blokes. I'm technically challenged. Happy New Year

Dec 28, 2008 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Fisher Paykel F1 error / double dishwasher drawer

F1-water on bottom of dishwasher. Uselly it cost by broken drain hose. Need expert tech to fix the problem.

Dec 01, 2008 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Moved into house with no manual...

The user manual is available at this site. But won't say much about F1 error except the flood switch has triggered. This means water has collected under the drawer in the main housing.

As the dishwasher was not used the drain hose must have cracked or the water inlet is leaking.

Water inside the dishwasher needs to be dried even if you fix the leak. check the installation manual on page 7 to find out how to take the drawer out. Then inspect the housing drains etc and the inlet water connection tap. Get a few towels and dry the base and then put the drawer back and test.

If drain hose is crackedt then these need to be replaced.

Make sure you leave the mains power cable disconnected when handling the inside of the dishwasher.
Hope this works for you. It is a nice dishwasher but needs a good deal of care.Do post a comment to let me know.

Jul 15, 2008 | Fisher and Paykel 24 in. DS603H I Built-In...

2 Answers

F1 showing on screen, however we don't have a manual and can't seem to stop it

You should be able to find a user manual here: F1 is a flood warning. You might want to have a little poke around the bottom of the cabinet and see if there's anything that might have upset the flood switch. A.

Mar 03, 2007 | Fisher and Paykel 24 in. DS603H I Built-In...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts


Level 3 Expert

76164 Answers

Owen Barnes

Level 3 Expert

867 Answers

Brad Brown

Level 3 Expert

15667 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides