Question about Home Theater Systems
Hi: I wonder if I could get a volume control for this machine.
SOURCE: headphone jack output
The same problem here. I solved it like this:
You must open the device. There will be a PCB with outputs and inputs. You must must detach it by removing screws on outside and then disassemble the PCB from two plastic pins to get the PCB rotated (I used plice to detache it one by one) and the conections of jack socket visible. In my case one od the lanes to the hot pin was broken. I checked that with Ohm meter 'cause it wasn't clearly visible with an eye. So having the PCB more or less secured I started to clean the lane a little bit to have a chance to put the solder layer near the pin and breakage. Get some really precise soldering device. It's a precise job. Do not overheat the diode which the lanes goes to. After placing some of the solder I checked the new connection by placing a jack into the socket and Ohm meter once again. All was perfect and working after assembling. Piece of cake.
Posted on Aug 22, 2008
Tips for a great answer:
Mar 31, 2016 | Bose Home Theater Systems
Jan 31, 2014 | Home Theater Systems
May 08, 2012 | Roland Spd-S Sampling Percussion Pad...
May 25, 2011 | Roland Sp-606 Sampling Workstation System
Dec 12, 2010 | Roland Vs2400CD Digital Workstation W/CD...
Oct 25, 2010 | Roland Spd-S Sampling Percussion Pad...
May 28, 2009 | Roland Mc-909 Sampling Groove Box System
Dec 13, 2008 | Roland Mc-909 Sampling Groove Box System
Jul 16, 2008 | Roland Mc-909 Sampling Groove Box System
Apr 07, 2008 | Roland Vs-2000CD Digital Studio...
302 people viewed this question
Usually answered in minutes!