Question about Sony KP-51WS510 51" Rear Projection HDTV-Ready Television

1 Answer

Won't Auto Converg

When Engaging the Auto Convergence the set turns off

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Sony Master
  • 8,617 Answers
Re: Won't Auto Converg

What is your model and year of manufacture. Also is your picture distorted as well as out of convergence?

Posted on Jan 13, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

I have 3d on my 52 inch rca and go to set up convergence isnt there this something i can fix?

Yes its a easy an inexspensive repair. has the ITC222 and ITC222A convergence option missing repair kit. The kit contains the parts and CD with instructions.

Sep 24, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Samsung PCL542R the Timer light is on and TV will not turn on

TV is in shutdown, may be caused by a shorted convergence amp IC. Also could be caused by any short in secondary B+ supply. Unplug supply to converg amps, if TV comes on, but out of convergence then you have a shorted IC, STK-392-010

Mar 10, 2009 | Projection Televisions

1 Answer

Mistubishi Convergence/video display problem

The most likely cause is shorted convergence chips and possibly a few pico fuses.

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony,Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer Hitachi,Mitsubishi,Zenith and others.
You can get a convergenece repair kit with instructions from the links below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2
Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

You can see some more examples and find a fix herebb0cf99.png

Oct 26, 2008 | RCA P56923BL 56" Rear Projection...

1 Answer

Mistubishi Convergence/video display problem

also check resistor values on the chips and resolder the tuner as this can cause problems as they heat up , then replace any electrolitic capacitors in the video circuts selector ic
i will be back to see what you get


Oct 26, 2008 | Mitsubishi WS-55809 55" Rear Projection...

2 Answers


Go into menu look on setup see if convergence comes up then do auto converg. if you do not see convergence on menu then you have an open fuse FL231 square brown cap next to flyback.

Jul 05, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Zenith converg.serv. menu code: G-Z Chas. with 9-1690

Try this proceedure it should work. Press and hold menu on the set. Then press vol Dn or up plus channel dn so all three buttons on set are pressed down on the set.

May 17, 2008 | Zenith R49W36 49" Rear Projection HDTV

1 Answer

Converg. ont pkt195 chass.

the convergence board or the convergence power supply board is the fault. If you would like more info please let me know, As that model doesnt have convergence ICs

May 04, 2008 | Projection Televisions

1 Answer


Take to a servicer and have them check the convergence Ic's and resistors then converg the set,auto convergence won't work if you have a defective parts,replace them first.

Dec 07, 2007 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Magic focus

Repair Magic focus or convergence problem? Because MF is the way you auto set your set to converg and focus.

Oct 06, 2007 | Hitachi 53UDX10B 53" Rear Projection...

Not finding what you are looking for?
Sony KP-51WS510 51" Rear Projection HDTV-Ready Television Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers


Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides