- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here's a guide;
What do the battery lights mean on my mouse?
Some keyboard and mouse models feature a battery light that shows the current status of the batteries. The following table describes the different lights and states.
Single long green blink
Batteries are good. This occurs when batteries are first installed or every time that the device is turned on.
Slow green blink
Device is docked in the charging station and is charging properly.
Device is docked in the charging station and does not need additional charging.
Presenter Mouse (Japanese version)
Laser pointer is on.
Device is discoverable (trying to connect to the transceiver).
Slow red blink
Batteries are low and need to be replaced.
Slow red blink
Batteries are low and need recharging.
Fast red blink
Device is docked in the charging station, but there is a charging error. Reasons for errors: The wrong type of battery is installed; the battery or batteries are missing; or the battery connection is bad. Solutions: Make sure that the correct battery or batteries are installed, and are installed correctly. If necessary, remove the batteries, wipe them with a clean cloth, and reinsert them.
Presenter Mouse (Standard version)
Laser pointer is on.
Don't bother trying to fix it these have a real problem with the connector and board buy yourself a docking station with remote for about $15 on ebay and it will fix you up. Plug into the input Jack and you are back in business. You can buy a Pyle Home PIDOCK1 Universal iPod/iPhone Docking Station cheap on ebay and it has a remote. It will fit nicely on your speaker and do everything you need it to do.
Yes they should light up blue when they are charging. Double check and make sure your docking station is still plugged in and turned on.
Most Docking stations are third party accessories, meaning, they were not manufactured by Nintendo. Some of them do not work very well.
If all else fails, remove the rechargeable battery pack from the Wii Remote and put regular AA batteries inside of it. The Wii Remote should work just fine.
Personally, I prefer to use rechargeable AA batteries rather than charging packs or docking stations. The charge packs/docking stations just never seem to work as well as they're supposed to. The rechargeable AA's work great and they're much more versatile since they're not limited to use in the Wii.
Try contacting Nyko company to see if they have any solution. www.nyko.com I have the same charge station and discontinued using it because it would not charge my controllers after only a few months of use.
You're an idiot. The flashing red light is ON HIS CHARGER FOR HIS WIIMOTES. So why the hell would it be a sync issue with the wiimotes and the wii console? READ the WHOLE question before making yourself look stupid.
I had the same problem. The Battery pack on mine was dead for a long time as i havent touched my Xbox 360 in a while. So SOLUTION Step 1. Plug the play and charge cord into the controller Step 2. If Light turns green within a minute or so, Unplug the play and charge cord and go to Step 1 (Repeating this process until the light stays red on the play and charge cord (3-10 times))
There are 4 reasons why your unit is behaving this way: 1. Charger is the problem. 2. The docking station is the broken. 3. The battery is broken or not accepting charge. 4. The actual unit is the problem. It is very hard to tell which one is causing this to happen. Let us do some troubleshooting first: 1. Plug your charger in an A/C outlet and make sure the red power light (left) is lit, otherwise the charger or the docking station is broken. 2. You can test the charger with a multimeter. Unplug the charger from the docking station and measure the voltage across the outside and inside, it should register more than 5 volts DC. If there is a 5Volt DC the docking station is the problem otherwise the charger is broken. 3. If the red power light is lit and the status light (right) is lit too, your docking station is broken. 4. If the red power light is lit, dock the unit into the charger, the status light (left) should turn red when your battery is accepting charge or turn blue when your battery is fully charged. 5. If the status light will not lit at all (while the red power light is on), tap the screen while the unit is docked on the charger. If the unit will become alive, you need a new battery otherwise you need a new unit.
12 hours is very long time to charge, the status light should turn to blue in less than 2 hours especially for a new battery.