Question about Agfa Cyber-shot DSC-W150 Digital Camera

1 Answer

Power error message

At power on, I get message advising to "tun the power off, then on again".. but nothing happens. Power is still on, but nothign appears in view screen.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I followed the advice of the other posts, about the lens just being stuck. I tried the tweeze and blow, and the gentle turning methods. Neither did the trick. I went to the "pull the thing out, if it breaks, well it wasn't working anyway" method, and voila! Okay, so I broke a little piece of the lens sliding lens cover...but at least I got to take the pictures of my daughter and Cupcake the Teddybear for her school project. Thanks everybody for the help.

Posted on Oct 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mpu5 error codes barcrest


Hi,
I have a cash beast machine, whenthe unit is powerd up, nothing happens, the mpu5 had got the -12v and the 34v leds on but nothign else, i have looked over the board to check the various status leds and as far as i cansee all of them are on, could this be a power supply problem, or is the card dead, does anyone know what/where i could look to see if i can find the fault, i do have 2 power supplies,. and both leave in the same state, i am tempted to say its not the PSU.
Read More.. HP Printer Support

Thanks,

Aug 18, 2014 | Office Equipment & Supplies

3 Answers

I have a samsung washing machine, a error message came up on the screen. 3e. we were advised to contact our after sales. we did, we were told by a service eng; the mother board was dud can you please...


Switch off the power/reconnect and try again, try unplugging power cord for two minutes, if problem persist follow instructions at the end of user manual to call service

Jul 24, 2008 | Samsung Washing Machines

1 Answer

Error code 0x07a74dd6 and 1959:lib_barracuda.c


Full Reset:
1. Tun Power OFF
2. Wait for 10 secs
3. Turn Power ON while holding 6 and #
4. Continue to hold until a reset notification pops up (be patient).
Note: The error may display again; just unplug and plug the power cord back in and you are good to go.

Feb 26, 2012 | HP OfficeJet 7310 All-In-One InkJet...

1 Answer

MY Sony cyber shot DSC W35 camera's shutter is open and close repeatedly and asks for power off and restart but nothing is happening. PL advise


Hi,

Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.
Performing a manual power reset
Turn off the camera.
Remove the battery pack.
Press and hold the power button for 30 seconds.
Allow the camera to remain without power for 60 seconds.
Reinsert the battery pack.
Turn on the camera.
To reset the Camera, press the RESET button located inside the Jack cover of the Camera using a sharp pointed object like ball pen or paper clip. This will set the user defined settings back to factory default. The images and videos will not get deleted.

If the issue persists, service may be required.

Thanks for contacting FixYa

Jul 17, 2011 | Sony Cyber-Shot DSC-P52 Digital Camera

1 Answer

My iPad would not back-up I attemped to restore it and nothing happened. I changed the SB cable an now nothing works except the spinning wheel but it won't tun on.


Try to hold the top right buttom(sleep/wake) and the home buttom for 10 seconds. If it does not work try it again with the ipad connected to a power source.
If you have no luck with this you can try the steps on this apple support case, it says its for iphone and ipod but it should work for the ipad as well.

Mar 21, 2011 | Apple Computers & Internet

1 Answer

It says a printer error has occured. If you turn off and start again nothing happens


• To resolve this issue remove the cartridges and then the printhead (To remove the printhead: Upon removing the cartridges push the small grey tab upwards.)
• Remove power
• Please now check for any objects or paper that might be obstructing the movement of the printer carriage - if any are found please remove them
• Wait 5-7 minutes
• Reinsert power
• Reinsert printhead (When inserting the Printhead please ensure that you hear it click into place)
• Then re-insert cartridges, black first then colour.Please also ensure that you hear them clip into place
• If the error persists, please advise us on where the error appears and what the exact wording of the error is along with any error lights.

May 15, 2010 | Office Equipment & Supplies

1 Answer

Dead sharp pc-ax40


You can try reseating the memory and the hard drive if you can get to it, but it sure sounds as though the motherboard is shot.
You can take it to your local computer repair shop.
Good Luck.

Mar 15, 2009 | Sharp Computers & Internet

2 Answers

Sony dsc w55 when turned on zoom lens seems to be crooked &message tun power off &on again nothing happens


Hello

If the lens barrel is crooked it is normally a sign that the camera has been dropped or knocked.

If you are careful you may be able to straighten the barrel up by trying to push is back into place.

If you are unable to do this you will have to take it to a service centre and have the lens block replaced.

Oct 03, 2008 | Cameras

4 Answers

Sreen says amp error


The audio Amplfier IC are damaged.

May 22, 2008 | Pioneer Audio Players & Recorders

1 Answer

Overlocking failure


Hold down "F2" to enter BIOS when you restart your computer. Using the arrow keys, navigate until you find your processor settings and set them all back to manufacturer's default.

Mar 28, 2008 | Computers & Internet

Not finding what you are looking for?
Agfa Cyber-shot DSC-W150  Digital Camera Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Agfa Cameras Experts

kakima

Level 3 Expert

102366 Answers

CHIVOIU...
CHIVOIU...

Level 2 Expert

62 Answers

Larry Stiles
Larry Stiles

Level 2 Expert

287 Answers

Are you an Agfa Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...