Question about Uniden TCX905 Cordless Accessory Handset and Charger Phone

1 Answer

My phone will not work we plugged a nother phone and it works why does our phones not work

Make it work.Thank you

Posted by on

1 Answer

Re: my phone will not work we plugged a nother phone and...

Rewire the jack. Obviously there is a wire not connected

Posted on Dec 26, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Our Panasonic KXT7130 phones are shutting down intermittently. We unplug everything, then it takes a couple of minutes and they come on again. What's the problem? Also, the "hold" button...

Unplug all phones and start plugging them in one at a time, starting with Jack 01 (either ext 101 or 21).

You probably have a bad phone or cable. When you get to it, the system will start shutting down again. The phone where the HOLD and SPRK button don't work might be the one causing the problem. Look for sticky stuff keeping the buttons from working (Coca cola?).


Jun 17, 2011 | Panasonic KX-T7130 Corded Phone

1 Answer

I unplugged vtech tel to move to another location-now i have CL flashing and none of the phones have dial tone-how do i fix-thank you very much for your help

The main unit with the answering machine needs to be plugged into and outlet and also plugged into a working phone jack. The other units just plug into an outlet and speak to the main unit wirelessly. Make sure the main unit is plugged into a phone jack.

Jan 17, 2011 | Vtech Digital Cordless Telephone VT-2568

1 Answer

How do I get a dial tone on both phones?

Believe it or not it was just a simple problem. I accidently pulled teh plug out.

Working fine now. Thank you

Jan 04, 2010 | Vtech Cordless 6041 Phone

1 Answer

I have charged for abt 20 hrs for set up. all I get is "Searching" Help me to move foreward.Sue DECT1560 This is a new phone I am trying to get it in service. I have no dial tone ,message "searching"...

First make sure the phone jack is working by plugging a working phone into it.

if it is working, use the same phone cable to plug into the base of your new unit.

if you do not get dail tone, place the handset into the main charging base. this should sync the phone up to the base. lift it out and try again.

if you still do not get dail tone or see searching, open the phone and remove the battery. wait 30s or so, plug the battery back in and set the phone in the main charger again. wait 10second and try the phone again.

Nov 06, 2009 | Uniden DECT15602 Cordless Phone

1 Answer

Just bought phone no dial tone i move the setting to pulse

First thing to try is another phone in the wall jack if it doesn't work either you need to call your phone company. If the other phone works, make sure that the telephone is getting power from the AC electrical outlet. Try swapping the telephone cord with another cord. and lastly, unplug the battery from teh handset and plug it back in untill you feel it click into place. Sometimes the new battery connections are pretty tight and may not really be connected even though it looks like it is plugged all the way in.

Mar 23, 2009 | Uniden 5.8GHz Dual Cordless Phone

1 Answer

Diverse 2010 phones stopped working

I have solved this problem by un-plugging the base phone for the night, and then plugging in again this morning, when it started working again, but I don't understand why! anyway, problem solved.

Apr 10, 2008 | Siemens Phones

2 Answers

No dial tone

Have you tried a known good phone in the jack, if that doesn't work take the phone to the demarc box provided by your phone company and open the door on the box. Under this door locate the mini jack and disconnect it, then plug your known good phone into that jack. If you get no dial tone at this point, then it isn't being provided by the local phone company so it's their trouble. Thank you. Jerry

Dec 18, 2007 | GE 26998GE1 Cordless Phone

3 Answers


This method worked for me!! you guys should try this.

i've copy this review from amazon.

by Kane Doerfler

"After a brief power outage from a thunder storm, I also experienced an e3/lights blinking error. I unplugged the phone and plugged it back in several times to no avail. After doing this a couple of times unsuccessfully, I hit the "STOP" button on the base immediately after plugging it in (before it completed booting up to show the "e3 message")and it reset itself and now works fine (or as well as it did prior to the e3). Try it before tossing yours in the garbage"

thanks to Kane. I saved my phone~!!

Nov 17, 2007 | Panasonic KX TG2258S Cordless Phone

1 Answer

Cordless phone not working

I am not an expert but sounds like the phone's base unit is damaged electronically (perhaps due to the charger shorting). Doesn't sound like a charger issue.

Oct 25, 2007 | Panasonic GigaRange KX-TG5432 Cordless...

Not finding what you are looking for?
Uniden TCX905 Cordless Accessory Handset and Charger Phone Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Phones Experts


Level 3 Expert

93861 Answers

Dave Ellis

Level 2 Expert

84 Answers


Level 3 Expert

7983 Answers

Are you an Uniden Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides