Question about Televison & Video

1 Answer

My 42 in plasma tv has froze while retuning digi tv

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 157 Answers

Try doing a hard reset (unplug the TV from the wall, wait a few hours, then plug it back in. If this doesn't fix it, it is most likely that the main board is defective. The control board should also be checked to match the specifications listed in the service manual.

Posted on Oct 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After retune bbc redbutton not working


Found this when my Philips LCD TV lost the BBC RED button http://sparedparts.com/parts/details/philips-lcd-tv-bbc-red-button-no-longer-works
5_18_2012_6_25_36_pm.jpg
No BBC RED button

Apr 07, 2012 | Philips Televison & Video

1 Answer

LG LCD TV 37LP1D digital freeview tuning problems


Hi - I have the same problem. Also in Cornwall LG were not interested in helping because the TV was 3 1/2 years old. There was a possible fix in the end offered via LG at a cost of £180 + vat - a hardware update that might or might not work but I was not going to pay that so I now watch my LG 42 plasma via a £25 digi box from the CO OP. LG must have sold 1000's of these Tv's so when the digital switch starts in the more populated areas of the country I exect many more web postings.

Oct 31, 2009 | Televison & Video

1 Answer

I have a Maxent 42 inch plasma.When you turn it on, it flickers for 5 minutes then comes on.recently the flickering continues non stop and now is almost unwatchable.Any idea what I can do to fix this? I...


What is the Product Name or Model number of your Maxent 42" Plasma TV? If it is a MX-42X3, Model # P420542HM8, I think I can help you. I have encountered this exact same problem with 2 Maxent MX-42X3 Plasma TV's. I found that C766, a 220uF, 16V surface-mount electrolytic capacitor on the main board is bad. This capacitor is located just to the left of the green multi-fin processor heat sink. This capacitor will test good using capacitor meter or an ESR meter, but if you spray it with Freeze-It with the power on, you will find out that this is the problem! To get it out, I found I had to remove the little 10uF 16V surface-mount capacitor just to the left of it. I then replaced these 2 capacitors with regular (radial), high-temperature, low-ESR capacitors. I cut the leads short, and bent the ends out just a little bit so you can solder them back onto the surface-mount pads. You can get these parts from Digi-Key Corp. I used Digi-Key part # P12383-ND ($0.32) for the 220uF capacitor, and P11212-ND ($0.30) for the 10uF capacitor. Both of these capacitors are rated for 25V and high temperature, so they won't go bad again. You can purchase surface mount capacitors there too, but I find them very difficult to solder back into those locations due to the tight placement of other capacitors in that area. If you're not an expert in soldering, I suggest you take the main board to a qualified electronic technician, and let him do it. But you better put the board in an anti-static bag before you take it anywhere! Hope this helps!

Oct 31, 2009 | Maxent MX42X3 42 in. HD-Ready Plasma...

1 Answer

Retuning digital


You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Sep 30, 2009 | Samsung SPN4235 42 in. Plasma HDTV

1 Answer

My Panasonic 42" Plasma has stopped receiving ITV & Ch 4


bro try to delete all da chanels and search again and if not den try to change da areal.

Dec 01, 2008 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

Haier 42 inch edtv plasma


Make sure that you haven't pressed input by mistake i.e going onto scart or pc1.gif input press TV on the remote and try this.
also check that the scart cable is fully inserted into the TV as well as the digi box or VCR or what ever.
The control board part number is TV-5210-57 and retails for $214.45 plus shipping and tax. To order please contact us at 1-800-313-8495

Jan 21, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

JVC plasma display receiver - sporadic line problem!


ik heb dit probleem ook sinds gisteren, hoop dat iemand weet hoe dit opgelost kan worden.

Nov 23, 2007 | Televison & Video

1 Answer

Really bad signal..


call tech ..suggest digi tuner.

Nov 09, 2007 | LG 42PX5D 42 in. Plasma HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5103 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...