Question about Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Error code f06 - Whirlpool Duet GHW9150P Front Load Washer

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,653 Answers

F06 is a Drive Motor Tachometer Error (Unable to Detect Motor Speed).

Disconnect mains power and unplug unit. Check the wire harness connections between drive motor and Motor Control Unit (MCU), and then between MCU and the Central Control Unit (CCU).

Reconnect mains power and switch the unit on. Check the MCU by looking for operation of the drive motor and check drive motor for cyclic powered rotation. Replace any failed component.

Note: If this failure occurs during high speed spin, the door will be unlocked after three minutes

Posted on Oct 08, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

WHIRLPOOL IS THE WORST WASHER I HAVE EVER OWNED PROBLEM AFTER PROBLEM

Posted on Jan 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is error code F06


The "F06" fault code indicates a drive motor error. This means the control is unable to properly detect motor speed and the machine will shut down.

Mar 17, 2016 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Error Code 01 F06


Your fault is mentioned here.

An F06 fault code in a Whirlpool Duet washer (the Kenmore HE3/4t's are also made by Whirlpool) usually means a motor-related problem. It usually pops up when the drum won't rotate at all or only very sluggishly. Here's the excerpt from the Whirlpool Duet Service Manual on this:

http://fixitnow.com/wp/2008/10/28/whirlpool-duet-washer-with-an-f06-fault-code/

May 10, 2015 | Maytag Dryers

1 Answer

Flashes error code F06


Check the wire harness that goes to all your connectors on the Motor, MCU, and CCU. I have seen a loose wire connector do this F06 error.

If all checks ok, then its a faulty CCU that needs to be replaced. Here is the part.

Oct 19, 2012 | Sears Kenmore Elite 4.2 cu. ft. Front-Load...

2 Answers

Indesit 123 FAULT F06


I had this error and engineer said the meaning of the codes on the web are wrong as they don't like to disclose their real code meanings for pure protectionism reasons. F06 on IWD7145 is a burnt out door interlock IDC error. He replaced the part number C00085194 (replacement door interlock) and microritardator part number 085194 and it works ok now.

Sep 06, 2012 | Indesit W 123 Front Load Washer

1 Answer

F06 Error Code


"F06" is a Motor Speed Error. The following link explains:

http://www.fixya.com/support/r714929-f06_error_whirlpool_duet_kenmore_elite

Read through the link provided and let me know if you have questions. In most cases this problem is attributed to a tachometer failure on the Motor Control Unit (MCU). If the this is the case, the MCU must be replaced.

If you require additional assistance, let me know. I hope you find this information helpful.

Sep 11, 2009 | Kenmore Elite 45986 Front Load Washer

2 Answers

F06 and F14 error codes


Before you replace the control panel use a tester on the cable to check continuity .. if the cable is faulty you will get this fault

Aug 24, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Kenmore Elite he3t model 11045972404


POSSIBLE COMMUNICATION PROBLEM BETWEEN MAIN AND MOTOR CONTROLLER

Nov 22, 2008 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

2 Answers

Whirlpool AWM 8023 -error F06


This erroe code means drive motor tackometer error Probably a bad motor or motor drive pc board or cable problems

May 23, 2007 | Whirlpool AWM8163 Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

658 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2180 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...