Question about Pinnacle Systems Targa 2000 RTX - Video Editing Graphic Card

1 Answer

Will not save to dvd after appearing to render after several hrs

Will not save to dvd after rendering using QuickSrat /Pinnacle 9 Plus - rendering appears to stop part way - even after several hours.
Asks for a new DVD to be entered.
Says that DVD is not empty and to insert new dvd - all types of DVD , CD - etc used which are brand new !

The programme only loads from D drive - and E drive is for reading/writing to disk.

Video file states that it is only 12 minutes long and about 40Mb in size - this does not seem accurate to me !

The programme used to work - but I have not used it since a full reinstall of Windows. All codecs apprear to be available - plus many activation codes.
They are:_

Studio 9 QuickSart to FULL unlock.
MP3 Encoding/Decoding
Dolby 2CH Encoding
Dolby 5.2 Consumer Encoding
MPEG-4 Encoding/Decoding
MPEG-2 Encoding/Decoding

Help appreciated. Thank you.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 121 Answers

U shoul use dvd+r on pinnacle it works the best, un install the program, run a registry repair program to remove any old pinnacle stuff still installed then reinstall, make sure you have all the newest drivers for you hardware, and windows updates, dont install any codecs until you tried the program, exp, dont instal dvix or any other program that u use to whatch pirate movies with, it should work

Posted on Oct 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I use Pinnacle Studio 9 Plus. Can I re-edit some part of the film after the film has been rendered?


Hello Friend,
Yes, you can re-edit the rendered film, however, you need to re-render it again after editing. But, this time rendering will be fast. I hope, this answers your query.

Thanks,
Shiva

Dec 19, 2010 | Computers & Internet

1 Answer

On Pinnacle Studio 12 plus, during the 'Make Movie', some of my still photos go black for several seconds and then reappear in time for the transition or just before the transition. This is then burnt like...


Hi and Welcome,

Click on set up>video and audio preferences>unchecked background rendering>click on "used this codec for background rendering>click and choose MPEG2 for best output to disc. Now click on project preferences>click on delete button and then choose delete auxiliary files for all project and then click okay.

Setup again video and audio preferences enable full resolution preview and click okay.

Another is,

click on the completed project in the timeline, go up to "Edit," click on "select all" in the dropdown menu, then RIGHT click anywhere in the now-highlighted project and select "Copy."
Now go back up to "file" and click on "New Project." Your current timeline will close (don't worry. It's saved,) and a new blank timeline will open. Left click anywhere in the new timeline, then right click and select "paste."
After a terrifying period when you think nothing is happening, your entire project will suddenly appear in the new timeline.
Save it with a new name, then try rendering again.

Regards,

Oct 09, 2010 | Pinnacle Studio Ultimate 12 for PC

1 Answer

I have Pinnacle Studio Ultimate Collection 14. When I try to render a 4 minute video random clips become jerky and unstable. I've tried to render on different sizes, different file types, different...


I don't know what you mean by 'when I try to render'...what are you doing?
Pinnacle 14 Ultimate Collection renders the clips you place on the time-line automatically, you just have to wait foreverrrr..
(If the bar above the clips on the timeline is light-green, it means the file isn't rendered yet. If the bar is orange, it is fully rendered. The light green bar will turn to dark green as Pinnacle renders the file, then change to orange when its done.
*Pinnacle can NOT render clips while you are playing your video.)
P.S Whenever you add a transition, effect, montage, title, or otherwise change ANYTHING about a clip/picture, pinnacle will take its sweet time rendering the ENTIRE clip/picture all over again...

Sep 25, 2010 | Computers & Internet

1 Answer

I have pinnacle studio 12 plus when i am publishing the movie it gives a export failure rendor error so i took out all the transitions and then only published half. I checked off the background thing...


Hi

In pinnacle studio as the movie is being rendered, the cursor moves along with it, this way you can find out at what point in the rendering process, the program stopped.

when you get the Pinnacle 14 Export Error; Real Time at some frame, then you know that, that frame may be damaged, so cut a few frames before and after where the cursor stopped, and try again.

if the rendering process stops a few times during the compilation, keep cutting those pieces and try again.

i hope that helps
Thanks
Jason

-----
Az Audio Visual Services
Video Conversion Service - Free Shipping North America Wide
http://www.azaudiovisualservices.com

Aug 17, 2010 | Pinnacle Studio Plus 12 for PC

2 Answers

Sony Handycam DCR-TRV250 driver for windows 7


hello .. how can i connect my handicam in windows 7 and copy my tape from handycam to my laptop..???
tanx

May 02, 2010 | Sony Handycam DCR-TRV250 Digital Camcorder

2 Answers

Make movie keeps timing out, render error


I have also been running into an MPEGENCODER.DLL error about 1/2 way through my 20 minute movie. I am able to Make Movie with a 6 minute version, but hitting this error time and time again. I have removed Virus protection and all unessential system tray loads; defragged drive; downloaded newest Windows drivers; downloaded newest NVIDIA drivers; running Win XP Pro SP3, Intel 3GHZ, 1GB RAM, 76GB/10K spin drive.

Jul 01, 2009 | Pinnacle Studio Plus 12 for PC

1 Answer

Studio 11 want allow me to burn my project to dvd


I suggest to render the project to a video file first avi conversion to isolate the case. Once you have finish import the AVI file in the pinnacle did try to create now the dvd disc so that the rendering process will be fast since that you already have the file not the project.

Jan 05, 2009 | Pinnacle Studio Plus Version 11

1 Answer

Pinnacle 10 dvd burning


have you tried rendering as an AVI file ... then burning???
also, check the drop down tab to make sure in the "make a disc" section that
there are not 2 listings for the dvd choice ... if there are... then select the second
dvd.. and tell it to burn...
or make the AVI and use Nero 8 or 9 to make the DVD.
my version 10.8 is whacked...
upgraded to 12... it's working fine... finally.
bbell

Dec 14, 2008 | Pinnacle Studio Plus 10 Full Version for...

1 Answer

I CANNOT BURN MOVIE TO A DVD


I have had similar messages with Pinnacle 9 (dives you mad :() The solution is to download the latest upgrade version from Pinnacle's website. Pinnacle 11 seems to be bug free.

Jun 30, 2008 | Pinnacle Studio AV/DV version 8...

1 Answer

No sound in one, corrupted file in another


You can reinstall version 7. Make sure you uninstall version 7 first and remove all of the folder associated with Studio.

It should be upgraded to the new version. Rendering issues are a lot better in versions 11 from version 7

Mar 06, 2008 | Pinnacle Studio Version 9 for PC

Not finding what you are looking for?
Computers & Internet Logo

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pinnacle Computers & Internet Experts

AL Schehr
AL Schehr

Level 1 Expert

7 Answers

Computer Links

Level 3 Expert

2385 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Pinnacle Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...