Question about Sanyo PLC XF45 Multimedia Projector

2 Answers

I need the installation manual for the sanyo plc xf45- I need the instruction on how to remove the lens and install a new one.

Posted by on

  • mamansuherma Feb 23, 2010

    I have a projector problem I was already several times changed the lamp but the display on the screen remains bright and yellow on the screen

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 70 Answers

Open your projector casing (top) near the lense, after that you can see screw, take that out and unlock the lense.

Posted on Oct 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,191 Answers

Hi,

You can download the required manual by clicking this link:

http://www.projectorcentral.com/pdf/projector_manual_2052.pdf

You'll require Adobe PDF Reader installed on your PC to view this manual. If it is not already installed on your PC, download it free from:

http://get.adobe.com/reader/

Hope this solves your problem. Thanks.

Posted on Oct 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Sanyo PLC-EX20 projector which shuts down after five minutes, what could cause this?


There are 2 possible causes.

The first may be due to overheating. Most projectors have a "air filter" that can be removed and cleaned. If it gets clogged with dust over time, the projector can't breathe and shuts down.

The second cause may be your lamps life hour clock. Most projectors keep track of the amount of time that their bulbs have been active. Once a preset # of hours has passed the projector will limit functionality until a new bulb has been installed AND the lamp life clock reset. Most projectors do not automatically reset the lamp life clock after a new bulb is inserted.

There should be instructions on how to reset the lamp clock in your users manual, and info on cleaning the air filter. Unfortunately I went to the Sanyo website and was unsuccessful in locating a PDF of the user manual for you.

Mar 04, 2011 | Sanyo PLC-XE20 (Chassis XE2000)...

1 Answer

Image upside down


You have to access the menu with the remote and scroll through until you find image page and then reset it.

May 19, 2010 | Sanyo USHIO PROJECTOR LAMP, Projector Lamp...

1 Answer

How to check lamp life on Sanyo PCL-XF31.?


go into the menu and will be under adjustments or status.

Aug 27, 2009 | Sony NAVITAR LENS, Projector Lamp FOR...

1 Answer

I need instructions for my sanyo plc-sw35


Hi There,

I Have a plc-sw35, Gave me many issues (switching off etc..) Ive managed to repair it, and made the manual available. http://www.entwan.netau.net/1_8_Repair-Schematics.html

My repair story is there also.

Jul 14, 2009 | Sanyo USHIO PROJECTOR LAMP, Projector Lamp...

1 Answer

Lumens decreased in my Sanyo PLC-XF45


You can open up the mirrors one by one and clear the dust. If this is difficult then just tkae a hand air blow pump and clear them manually.

Dec 19, 2008 | Sanyo PLC XF45 Multimedia Projector

1 Answer

Temp warning


Clear the air flow and replace or clean air filters. that will solve.

Nov 02, 2008 | Sanyo PLC XF45 Multimedia Projector

1 Answer

Sanyo plc se15 no light output


i all,hoping you can help with my problem.Ihave been given a sanyo plc se15 projectoe but with no lamp originally,the "lamp"indicator and "lamp replace indicator"were originally lit but when i have installed a new(23hrs use previously) lamp i have no light output and these 2 indicators are still lit! what voltage should i have on the lamp terminals(i a fully qualified electrician btw) is there some sort of reset procedure as i dont have any instructions etc

thanks in advance for any help

Mar 05, 2008 | Sanyo PLC-SW30 Multimedia Projector

2 Answers

Yellow tint square inset 2 projectors!


swounds like a default setting has been changed .. Try finding in the manual how to do a master reset to factory defaults

Apr 19, 2006 | Sanyo PLC XF45 Multimedia Projector

Not finding what you are looking for?
Sanyo PLC XF45 Multimedia Projector Logo

Related Topics:

462 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Office Equipment & Supplies Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Sanyo Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...