Question about Motorola Mobility RAZR V3c Cellular Phone

1 Answer

Exterior display My wife's Razr got wet - I dried it out and with the exception of the exterior display (constantly on), appears to work properly. Is the exterior display suppose to be constantly on? If not, I've looked for a setting on the phone but could not find one, help?

Posted by on

  • hazendoyle Dec 28, 2007

    I got a new battery last week because it wouldn't hold a charge & they reprogrammed it too. But now i have had trouble answering, dropping calls & the display going blank. When i would hold the battery or take it out all together it would sometimes help. I took it back a few days later & now they tell me it got wet..the white button in the back is red. So now what do i do? They want to give me a loner & send mine in. Should i or is there a way to dry it out? Please help! Thanks for you time.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Get it serviced from the service center. outer display is not meant to be on constantly

Posted on Dec 27, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My LG GM 200 mobile display got wet in rain .i kept that display completely dry. after i fixed that it is not working just appears white. tell me how to solve this problem?


my LG GM 200 mobile display got wet in rain .i kept that display completely dry. after i fixed that it is not working just appears white. tell me how to solve this problem?

Nov 24, 2010 | LG GM200 Cell Phone

Tip

Dryer Dry Time Appears to Jump or Stall During Auto Dry Cycles


The operation of dryers during the Auto Dry Cycles is based on the moisture content of the clothes as they cycle over the moisture sensor. At the start of the cycle, the default estimated time is displayed depending on the cycle selected. The moisture sensor feeds information to the control based on the "wetness' of the clothes during the first 5 minutes of the cycle. The control then calculates and display a new estimated time making the time appear to "jump".

Recalculation happens again based on the reduction in the "wetness" of the clothes when the Estimated Time Remaining is between 15 to 5 minutes. The control will extend the cycle and display the Estimated Time Remaining unchanged if it "sees" no significant reduction in the wetness level of the clothes. The dryer will run longer than initially projected and give the appearance that the displayed time has "stalled".

Clean the sensor bars for any films or dirt build up to make sure it sends accurate information to the control. Level the dryer front to back and side to side to ensure the clothing will tumble properly and making good and proper contact with the moisture sensor bars. Check the dryer vent duct for any restriction to ensure a good air flow as the operation of the Auto Dry Cycles is based primarily on the air flow condition.

It is highly recommended to clean the lint filter before every load and make sure the dryer is grounded at the wall plug.

on May 17, 2010 | Whirlpool WED9200SQ Electric Dryer

1 Answer

Wife washed RAZR. appears to work but screen is blank (dark) Any easy solutions?


your display is damaged please give it to a authorised motorola service centre

Oct 07, 2009 | Motorola Mobility RAZR V3

1 Answer

Motorola Razr V3a Backlight Stays On


From the manual, p. 31:
"BACKLIGHT
Set the amount of time that the display and
keypad backlights stay on, or turn off backlights
to extend battery life.

Find it: (on menu) > Settings > Initial Setup > Backlight"

Jun 22, 2009 | Motorola Mobility RAZR V3

3 Answers

RAZR V3 - New battery w/full charge drains in 1hr of standby


take out a battery and check if there is any red paper dots on the back of the phone. If you do have a dot that is at least partially red, that means that your phone got wet and it can not be fixed.

Nov 15, 2008 | Motorola Mobility RAZR V3

1 Answer

Razr 3a


ok so use the hair dryer to dry the phone after disembling it watch out for the parts be carfull for the flex cable aswell

Sep 03, 2008 | Motorola Mobility RAZR V3

1 Answer

Problem in display.


hi, 
   if u had operated ur razr with wet or oily hands, then it ll cause display problems...any internal display circuit would have got damaged because of tat...so take it to d nearest service center immediately to prevent further problems..

good luck

Jul 04, 2008 | Motorola Mobility RAZR V3

2 Answers

Motorola Razr....wet :-(


if it can't find your network your antena is fryed and you do need a new one if you wanted to you could have somone try to unlock it it might have just lost the coding for your network.

Feb 19, 2007 | Motorola Mobility RAZR V3

Not finding what you are looking for?
Motorola Mobility RAZR V3c Cellular Phone Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

Virgil Wolter

Level 1 Expert

29 Answers

vince

Level 3 Expert

1216 Answers

D. E. Hev

Level 3 Expert

1181 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...