After consulting with my home recommendation I realized there are six main bathtub materials: Wood,...
(More)
After consulting with my home recommendation I realized there are six main bathtub materials: Wood, Acrylic,Fiberglass,Porcelain on Steel,Cast Iron and marble. Which meterial is better? What's your advice?
There are four basic styles: recessed, corner, drop-in, and freestanding - what might be better for...
(More)
There are four basic styles: recessed, corner, drop-in, and freestanding - what might be better for a small shower room?any recommendation ?
My home was built in 2001 and I am the second owner. I have a jetted tub for which I have no...
(More)
My home was built in 2001 and I am the second owner. I have a jetted tub for which I have no information. I have a push button start and when i push the button I hear a click in the area where the motor is but it does not come on. Do I have to remove the side panel to understand what the problem is? Looks like I would have to remove my baseboards and possibly some tile.
one tile in the first row up from the tub fell out and the wall behind where the tile came out is...
(More)
one tile in the first row up from the tub fell out and the wall behind where the tile came out is soft and not ridged at all to glue the tile back in place the wall is plaster nd lath im letting it dry with plastic over the wall for a few days to see what i can do ??????
My new heater does not work on my hot tub. I have a Jacuzzi Z135 Model s2600000 with a Controller...
(More)
My new heater does not work on my hot tub. I have a Jacuzzi Z135 Model s2600000 with a Controller version r574 and a Balboa 58028 that has been replaced by the 53349 heater (4 KW, 1 PSI set Pressure Switch). We have checked several things including that the pressure switch is turning on (checked resistance with voltmeter). We found that if you ground the volt meter to the chassis and select one of the terminals from the heater you get 120volts. If you select the other terminal you also see 120 volts. The heater says 240volts but it seems like I am only getting ½ the voltage but it should work on 120 since the hot tub will run 120. The hot tub will run for several hours and the temperature will not change. The light on the control panel that shows the heater is on does not seem to be illuminated. Any Ideas on why I have a cold tub?