Question about Home Theater Systems

1 Answer

One for all 7562

Do you know the code for a Dual HT600 dvd/surround sound system?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: one for all 7562

Hi looking for code for my suround sound accustic solutions as133 for my urc7562 one for all . many thanks.

Posted on Dec 04, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I can get sound through the samsung surround sound system but no picture.

Chech ur video cables to n from tv n surround system. Or ur system may b on wrong input device.

Mar 13, 2013 | Home Theater Systems

1 Answer

Surround sound for DVDs.

If your DVD disc supports it, you will have to enable surround sound from the DVD, as well as the speakers.

May 10, 2008 | Koss KS3102 System

1 Answer

The left channel on my Nakamichi SoundSpace 8 has suddenly started

  • Complete home theater system with top-loading DVD/CD player, surround sound processor with AM/FM tuner, and center channel amplifier
  • Includes 5 satellite speakers (2-way, 3-drivers each) and dual active subwoofers with 6.3-inch woofers in bandpass enclosures
  • Supports DVD, CD, CD-R/RW, and MP3-CD formats; processor integrates DTS, Dolby Digital, Pro Logic II, and synthetic surround effects
  • Built-in sub woofer amplifiers separately power left- and right-channel satellites to minimize interference and crosstalk
  • Satellites measure 3.1 x 7.2 x 3.9 inches (W x H x D) each; subs measure 8.9 x 20 x 9.6 inches; 2-year warranty

Jul 22, 2012 | Nakamichi SoundSpace 8 System

1 Answer

Have lenoxx ht 500 surround sound speakers & dvd but dvd is broken, need to purchase another dvd player but can't source lenoxx model, what other models can i connect surround sound to? or whe

If your surround sound receiver unit has rca audio inputs(red/white), you can hook up any brand of DVD player that has rca outputs. You would hook the yellow output from DVD player to yellow input on TV. Hook red/white output from DVD player to red/white input on surround receiver. Hope this helps.

Jan 03, 2012 | Home Theater Systems

1 Answer

Sound only from left front and right front speakers possibly my projection screen tv is only 2.1 channel does this mean i cannot have surround

surround receivers are supposed to be able to turn a stereo signal into a surround signal.  if the surround unit is producing just a stereo sound, then the tv is most likely outputting in mono, and not stereo; or there is no surround sound to decode..

Dec 27, 2009 | Coby DVD-937 5.1 Channel DVD...

1 Answer

The Directv codes for my Samsung HT-TZ512 surround sound/dvd player don't work. How can I program my Directv remote to control the dvd player? The codes I've tried are 20490, 20573, 20820, 21075 and 20899....

sometimes directv remotes do not work with surround dvd players. Try doing an automatic code search . Most of the time it will only allow you to power the dvd player and operate the volume.

Oct 23, 2009 | Samsung HT-TZ512T Theater System with...

1 Answer

Surround sound ok whilst playing dvd but not working for tv

On your Sagem TV you should have two RCA ouputs (red and white connection usually marked ouput) ) Connect these to the input on the surround system using the interlink cable.

You should then be able to hear the sound from the TV by changing the SOURCE on the home cinema remote.

Better still if you have a digital out on your TV use that instead.

Nov 25, 2008 | Home Theater Systems

4 Answers

Samsung surround sound wont connect up properly to samasung plasma tv

i have a plasma samsung 42 inch and i dont know how to connect my jacks red,white, yellow from the dvd to the plasma and what channel should the plasma be on to see the dvd ???? thanks anthony

Mar 28, 2008 | Samsung HT-Q100 System

1 Answer

Hooking up video

I am assuming that you are using a surround sound system?If so on the back of the satellite receiver you will have RCA cables labled yellow ,red,white uuse an rca cable to run from the output on the back of the sat box to an rca input on the surround sound unit.the inputs should be labled on the back of the surround sound unit.once you have the sat box plugged in look for the output on the surround sound (rca cables) run one set of rca cables to the rca cable input of the Tv.on the original tv remote select the tv input that is the cable from the surround sound is plugged in to . make sure the surround sound unit input is selected to the input that the sat box is plugged into.this will give you surround sound from your satellite receiver,repeat with your DVD player plugging the DVD rca cable output to another empty input on the surround switch between the sat box (satellite TV) to DvD select another input on the surround sound unit.Try to correspond the units you are plugging into the surround sound to the correct name of the component on the back of the surround sound unit to avoid confussion.any questions,Im here to help.If this works rate me FIXYA! if it helps.GOOD LUCK!

Nov 18, 2007 | Panasonic SC-HT40 System

Not finding what you are looking for?
Home Theater Systems Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Theater Systems Experts

Gyula Lacz

Level 3 Expert

482 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

6993 Answers

Are you a Home Theater System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides