Question about NorStar M7310 Corded Phone

1 Answer

Only certain lines ring on certain phones

Line 4 of our phone rings 4 or 5 times on the phone out in the shop before it starts ringing on my phone only in the office. we don't want it to ring at all in the shop, we want it to ring on every phone in the office. how do i change this?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • NorStar Master
  • 860 Answers

Programmingonly certain lines ring on certain phones - 2.gif is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS.
The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number. Enter extension number you wish to program ringing on.
Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear& ring2.gif
press next key (lower right arrow)til you see the line port number you wish to program (004)
The display should say line 0xx: appear only
press the Chng key till it says appear & ring

press the release key when finished

Posted on Oct 07, 2009

Testimonial: "thank you so much!! thats exactly it!!"

  • george  peters
    george peters Oct 07, 2009

    Programming is done on M7310, M7324 and T7316 sets.
    To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
    The screen should say TERMINALS&SETS.

    The 4 top line/feature keys are now used for programming.
    At the terminals&sets prompt, press the show key (top right arrow).

    The display should now ask for an extension number. Enter extension number you wish to program ringing on.

    Press the show key (top right arrow)
    The display should sat LINE ACCESS
    Press the show key (top right arrow) .
    The display should say LINE ASSIGNMENT.
    Press the show key (top right arrow) .
    The display ask for a line number. press list
    The display should say line 001: appear& ring
    press next key (lower right arrow)til you see the line port number you wish to program (004)
    The display should say line 0xx: appear only
    press the Chng key till it says appear & ring

    press the release key when finished

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How Do I for some of my lines only to ring on certain phones? I dont want the rest of my phones to ring.


Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Central telephone Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.

Press feature "00" to logout

Sep 30, 2010 | Lucent PARTNER18 Corded Phone

1 Answer

Line 1 of the pro star 816 will only ring on one of our phones and not the other. Line 2 and 3 rings on the seperate phone but not the other one. How can I make all lines ring on both phones?


To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #62 the screen should say day ring assn
3) press the line you wish to program
4) press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
5) press # when finished with the line
6) repeat steps 2 through 5 for the remainder of the lines you wish to change
press #when finished.

Jan 08, 2010 | Samsung Prostar 816 Phone

1 Answer

Our phone has 4 lines and about 5 phones but if you are on a phone call if another line line rings in the phone does actually ring so if you are not looking at the phone directly to see if any lines are...


You can do 2 things, set up call waiting by dialing ^7321 for outside calls and *7311 for intercom calls, and make sure the phone is programmed to ring as a member of an ICD group. Making the 5th digit 0 will cancel the feature.

Carl
.

Dec 02, 2009 | Panasonic KX-T7630 Corded Phone

1 Answer

Secondary phones will not ring


To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset2.gif down enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #62 the screen should say day ring2.gif assn
3) press the line you wish to program
4) press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
5) press # when finished with the line
6) repeat steps 2 through 5 for the remainder of the lines you wish to change
press #when finished. hope that helps

Sep 22, 2009 | Samsung Prostar 816 Phone

1 Answer

Stations don't ring even though day ring and night ring enabled.


Sounds like the ring assignmet programming has defaulted.( all lines ring at station 4 only)
To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #62 the screen should say day ring assn
3) press the line you wish to program
4) press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
5) press # when finished with the line
repeat for each line

Jul 20, 2009 | Samsung Prostar 816 Phone

2 Answers

Trying to make every phone ring when the main phone rings


Well that is better than most people in finding the arrows...

Ok, first you need to know the extensions that you want to program to ring, and the lines, record these numbers... if you do not know the extension numbers and actual line numbers; going to each set, and doing a FEATURE * 0 and the Intercom and line buttons this will tell you the extension number and line number (this also tells you what is on every button).

Then goto your set and put in:
-> FEATURE 2 6 6 3 4 4
-> Password: 2 6 6 3 4 4


Now you will have to look at your LCD for 3 arrows
<- Heading....Enter->
<- Back .......Next->

You will not see these words in the LCD display, you just have to look for the arrows that correspond.

-> you will now see “TERMINALS&SETS” and press Enter (the top right arrow key)

-> now put in the extn that you want to change (Eg. 227).
-> you should now see the extension number “227: NAME”

-> press Enter (the top right arrow key) again
-> you will now see “LINE ACCESS

-> press ENTER
-> you will now see “LINE ASSIGNMENT

-> and Enter
-> now you can type in the lines that you want to ring on this extension (Eg. 025 for line 5)

-> hit CHANGE till it says "APPR&RING" (Appear and ring means that the line will have a button on the set)
-> hit NEXT to save changes
-> press FIND to look for more lines and change the appropriate lines to appear and ring
-> then the RLS button (the little orange button) to exit programming.

After this programming is done, dial Feature * 0 and look for these new lines.

Good luck.

May 05, 2009 | NorStar Meridian M7310 Phone

1 Answer

Norstar Phones - Turn off ringer on phones


You have to go in to programming and set the phone in the shop to ring on line 3 only and the phones in the office to not ring on line 3.If you don't know how to go in to programming please inform me.

May 14, 2008 | NorStar M7310 Corded Phone

1 Answer

Missing calls


Hi,

I had this problem once and on my phone I would get one ring and then it would stop. Checking the phone I saw I missed a call. I live in the mountains of Puerto Rico and I believe what is happen is the network plays the rings for the caller but the phone isn't doesn't get the signal or start ringing until 3 or 4 rings later. In other words the caller has already heard 4 or 5 rings and has given up. While you have heard only one ring and when you got to the phone you already missed the call. I told my friends to let it rings more then 5 times before giving up and that worked.

Dec 08, 2007 | Kyocera Oystr KX9 Cellular Phone

2 Answers

My phone works, but it doesn't ring!


disconnect all phones and just connect the GE phones.
there is only a certain amount of power transmited through a phone line to make the phone ring if you have too many phones running off the same line then the ones further away from the main connection suffer

Jan 05, 2007 | GE 21018GE3 Cordless Phone

Not finding what you are looking for?
NorStar M7310 Corded Phone Logo

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...