Question about Canon Office Equipment & Supplies
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: canon image runner COPIER
We finally found all the buttons-levers to push and to pull and were able to remove the paper that caused the paper jam. Thanks for your help Nellie
Posted on Dec 23, 2008
Dear sir; The error code you have, means;"waste toner full, replace drum unit" but let's try to reset,steps by steps;
1,press "additional function", "*" "2", "8" in that order.
2, sssw will display, press "OK"
3,enter 34 press ok, enter 0 press ok.
4, prs stop key.
machine should be working now, if still have problem let me know ,I'm always around, if everything is fine, please be generous give me a rating,thank you,
WISH YOU HAVE A MERRY CHRISTMAS !!!
Posted on Dec 23, 2008
When the ROM Error message is displayed on the control panel, this
will indicate an issue with the Flash DIMM on the Image Processor PCB.
re-flash the system software for that specific model. If system software does not resolve the error, replace the DIMM Assembly. When replacing the DIMM, you may be required to flash the system software to it's latest version.
iR 2010F FG6-9454-000, Dimm assembly.
As a temporary work around, power on the iR while holding down the STOP key. This may boot the iR to a ready state and copies can be made.
Posted on Mar 14, 2009
SOURCE: waste toner
to change the waste toner on your IR 5055, stand directly in front of machine and look on the right hand side of it where the power switch is a black button on right hand sdie at the back and you will see 4 screws and a metal plate that will come off the waste toner bottle is in there just empty it out and refit to machine all will work, now on your IRC3170 just undo front door and you will see a clear bottle just undo the black screw and take out the bottle and you will see a couple of little clear windows in the bottle make sure you take them out and clean them before you emtpy the bottle, this is where the machines shines a light through it to tell if the bottle is full or not so make sure you have them clean. refit the bottle and all will be ok
Posted on Jun 01, 2009
It's related to copier HDD try with some technician to replace HDD or reinstall HDD software.
A data read fault of the HDD is detected when the HDD is started up. or
The wiring is faulty (short circuit, open circuit). The HDD is faulty.
also check -
Are the connection and the cable between connector J1025 of the main controller PCB and the connector J2005 of the HDD normal?
Posted on Jun 24, 2009
Tips for a great answer:
Nov 04, 2012 | Office Equipment & Supplies
Oct 18, 2010 | Canon imageRUNNER 2200
Jul 30, 2010 | Canon imageRUNNER C5180 Color Copier
Jul 29, 2010 | Canon (6981A002AA) for imagerunner 2200,...
Sep 29, 2009 | Canon imageRUNNER 5000 Copier
Mar 12, 2008 | Canon USA - COPIERS - ImageRUNNER 2010F...
Feb 19, 2008 | Office Equipment & Supplies
May 27, 2018 | Canon PIXMA Office Equipment & Supplies
86 people viewed this question
Usually answered in minutes!