Question about Sanyo DVW-7200 DVD/VCR

2 Answers

I need help with my tv and dvd/vcr combo

I have and old RCA Guide Tv , I have a new Samsung DVD/VCR Combo. My t.v. does not have the red,white and blue outlets and my TV does not change to audio or video. How can I hook this up. I tried to put my TV on channel 3 but nothing seems to work. Can you help me?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: I need help with my tv and dvd/vcr combo - Sanyo DVW-7200 DVD/VCR DVD & Blu-Ray Players

I need the guide with the codes.

Posted on Dec 09, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 69 Answers
Re: I need help with my tv and dvd/vcr combo

Hmmmm...I dont understand exactly what you are saying, but it sounds like your TV doesnt have RCA ports and you want to hook up a newer DVD player that uses RCA ports. If you have only a cable port (silver threads with a hole sticking out of back) on TV and RCA ports on DVD player, you have to buy a converter. You can get one at Wal-Mart for 20-30 dollars. Or you can just update your TV which it sounds like you badly need to do! :)

Posted on Dec 24, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I hook up my Toshiba DVD player to my old Daewoo Tv /vcr combo

what inputs does the old Daewood / VCR combo use is it RCA and Video cable on an AV input? How many Av inputs are there in TV ? Does the DVD player have AV out audio out (Yellow) RCA (Red and White). If you do not have enough AV inputs on the Tv use an AV switch box . and Switch two AV RCA inputs /DVD and VCR and into one output to the TV. You may be able to feed the AV out RCA out into the VCR AV in and switch the input on the VCR.

May 25, 2015 | Toshiba DVD & Blu-Ray Players

8 Answers



Check this site for Info's how to connect your device, click HERE

keep me posted for inquiries, thanks!

Jun 30, 2008 | Philips Magnavox DVD/VCR Dual Player

1 Answer

Using your DVD-V4600, how do you play a vhs tape on TV? Need step by step instructions.

In order to watch either DVD or VHS on your TV ,you need to make the following connections ..
  • You need to connect "DVD Player / VCR Combo" to" TV " as (Audio/video output of DVD Player / VCR Combo -TO- Audio/Video input of TV) ..
  • use either "RCA analog (red/white +yellow ) " or "SCART "or "Optic " cable.(any standard optical cable )...if exist ,optic is the best way to connect it..Remember your DVD Player / VCR Combo 's "OUT" goes into" IN "of the TV ..
  • pls also remember,wherever you connect your DVD Player / VCR Combo on your TV ,you should switch the source selector accordingly to correspond to the connection on the back...
Hope this helps!..if more help requires pls let me know.
Take care and please
Remember to rate/vote and give me 4 Thumbs Up for me to continue f
or Helping out the Community :)

Jun 30, 2011 | Samsung DVD-V4600 DVD Player/VCR

2 Answers

How do I hook up the DVD/VCR to cable box and Vizio HDTV?

both should be hooked directly to tv

VCR side of combo should be hooked up with composite video(yellow, red, white wires) to video 1 input

DVD side of combo should be hooked up component video (red, blue, green wires and red white for sound)

cable box should be hooked up HDMI or component to TV if HD or composite video if SD

hope this helps

good luck

Mar 13, 2011 | Samsung DVD-V4600 DVD Player/VCR

1 Answer

I have my Samsung model dvd V9800 hooked up to my RCA RT2906. The dvd side is showing a picture but the video side is not. The RCA RT2906 has have a hook up for a vcr player by it's self but I do not think...

VCR video signal wont come out from Component Video Out of combo unit, it is low resolution signal so you need to hook yellow-red-white video cable in tv for VCR output.
Make sure to select VCR as source in combo while playback of VHS tape and select DVD as source when playing dvd disc in combo.
Hope these info will help you.
Let me know if you have additional question.

Dec 04, 2010 | Samsung DVD-V9800 DVD Player/VCR

1 Answer

Need wiring diagram to connect to Philips HD TV

On the back of combo, use the side that says DVD and VCR out. Connect red, white and yellow cables from the output on the combo to the input on the tv. Use the tv remote and switch input of tv to where you plugged it in.

Aug 10, 2010 | Samsung DVD-V4600 DVD Player/VCR

1 Answer

The VHS tapes will not playback on the Samsung TV (flat screen)..the Samsung TV is a Syncmaster 2333 HD...the Samsung dvd/vhs unit is a DVD-V9800 The DVD discs will play just fine. How should I be...

On these combo units, the VCR will not play using component cables but the dvd's will play just fine.

What you need to do is run a pair of composite (Yellow, red and white) cables and use that for VCR and component (Green, blue, red, white and red) for the dvd player.

Make sure you switch the tv to the corresponding input.

Dec 30, 2009 | Samsung DVD-V9800 DVD Player/VCR

2 Answers

How do i/can i record tv to a DVD ]

If your using RCA cables (thats the red, white & yellow leads) you need run yellow RCA from the 'VIDEO (or) TV OUTPUT' at the back of your tv, to the 'VIDEO (or) TV INPUT' in the back of your DVD/VCR combo unit, & do the same with the red & white 'AUDIO' leads only run them from AUDIO OUTPUT(tv) to AUDIO INPUT(dvdrecorder). Now set the mode of the dvd recorder to TV IN or AUX IN. Now it should record whatever you see on the tv screen. But if your tv has an S VIDEO OUTPUT option, using an S VIDEO cable would be much easier & produces a better copy! Hope this helps!

Jun 19, 2009 | Symphonic WF803 DVD Player/VCR

1 Answer


ok so what you need to do is put the cable from your cable provider/ antenna (or what ever you use)to the combo players CABLE IN connection.. then color match of the red yellow and white cables from the OUT on the combo to the IN on the TV your tv has to be set on AUX sometimes called L1 or L2 depending on your tv and which set of red yellow and white holes on the tv you use... your combo will also probably need to be turned on.. try that should work!

Oct 16, 2008 | RCA DVD & Blu-Ray Players

2 Answers

How to hook up my dvd/vhs combo to my tv with out the red,yellow and white cables

go to radio shack and get the red and white and yellow cords.

Dec 23, 2007 | DVD & Blu-Ray Players

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

66456 Answers


Level 3 Expert

56798 Answers

David Payne
David Payne

Level 3 Expert

13437 Answers

Are you a Sanyo DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides