Question about Baby & Toddler Car Seats
My 1997 samsung comes on for about 10 minute but goes off and i turn it back on and nothin ,and about 30 minute it comes back on and back off help.
Its fried. The TV works fine until it gets hot and then it powers off...basically you need someone to replace some innards or you need a new TV. Bad news friend.
Posted on Dec 24, 2007
Tips for a great answer:
Dec 10, 2014 | Chicco Key Fit 30 (Atmosphere) Infant Car...
Jul 20, 2014 | First Years The Red Stripe Ingnite...
Jun 22, 2014 | Maxi-Cosi Familyfix Base Isofix only
Feb 04, 2014 | Maxi-Cosi Tobi Car Seat - Jet Black
Just did it. It took two of us, but only a couple of minutes and no
tools (except a table knife) once we'd worked out what the problem was. The
reason the strap doesn't thread easily through the slot is that there is a sprung
two-part mechanism that needs to be held open. One person threads the strap through
while the other keeps the mechanism open.
1) Find the slot under the
chair that the strap goes into - turn the seat upside down; it's a thin gap you
can feel with your fingertip when you run your finger along the narrow back of
the metal strip under the front of the seat (not the base).
2) Remove the metal rod
that attaches the grey reclining lever. The rod is about 20 cm long and can be pushed
out without tools. Removing this rod seems to make it easier to open the buckle
mechanism. When replacing the rod later, you just have to line it up carefully with
holes (we used a torch to help us see them)
Make sure the strap passes under the metal rod at the bottom of the seat
back (you can see how here in a small photo here: http://www.englishforum.ch/attachments/sale-wanted/37565d1327058634-sale-maxi-cosi-tobi-car-seat-9mths-3-yrs-zh-maxi_cosi_tobu_small.jpg)
4) Push back buckle as
far as it will go (it goes back past vertical easily, then needs another firmer
Hold the buckle in this backwards position.
Insert a table knife (rounded and blunt, not sharp) into the space under
the buckle and push back the sprung, hinged plastic part that the knife touches
at the back.
Person 1 then threads the strap back through the slot, pushing until then
end comes out.
Tie a knot in the end of the strap so you don't accidentally pull it
Replace the metal rod in the reclining mechanism.
Mar 21, 2011 | Maxi-Cosi Maxi Cosi Tobi MAGIC ROSE 2008...
Sep 16, 2009 | Combi Centre DX - Mango
Jun 11, 2009 | Baby & Toddler Car Seats
Dec 03, 2008 | Baby & Toddler Car Seats
Dec 02, 2008 | Baby & Toddler Car Seats
38 people viewed this question
Usually answered in minutes!