Question about Logitech QuickCam Fusion Webcam

1 Answer

Quickcam Orbit MP / WIndows 7

There's a red line running vertically down the center of the image. This happens in any video application. Is there any way to fix this?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next "Calling and Devices" on the right, set the Microphone and Speakers to the computer Audio Card or headphones/mike.
Next go to the Test Audio section below where you just setup the microphone & speaker and (written in blue) click on "Open the call setup assistant"
and the "Yahoo Call Setup Assistant" window will open to the left and follow the the instructions. Click on FINISH and the audio will be setup.
Next go to "Webcam" and click in the circle "Allways allow the following people to view my webcam.
Next Click on "Super Webcam" snd in the circle click "Start Super Webcam mode automatically".
Then click OK and it should work.

C. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

Posted on Oct 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Logitech Quickcam Orbit AF which causes my computer to crash whenever I try to use video. My os is windows 7 ultimate. Any ideas? DHA


It is most likely the driver for your camera. Check the Logitech website for the most up-to-date drivers and install them.

The crash screen, otherwise known as the "Blue Screen Of Death" or BSOD, is usually caused by an error on the driver level. This can happen when code in the driver for the device conflicts with something in Windows or your computer hardware, and the system shuts down to prevent damage. The BSOD gives information about what conflict occurs, and creates a "dump" file with more detailed information.

There is a freeware utility you can download here that will analyze the dump and give you more information about what caused it.

Oct 30, 2013 | Logitech QuickCam Orbit AF Webcam

1 Answer

Drivers for windows 7


http://www.logitech.com/en-us/435/245?section=downloads&bit=&osid=13 this driver shoud work on windows 7 too just click on select a file and choose 32 or 64 bit operating system and install it but don't forget to unplug your camera when install the drivers

Dec 12, 2010 | Logitech QuickCam Orbit MP 961422-0403...

1 Answer

Windows 7 will not recognize Logitech Orbit Cam


Win7 32 or 64 bit? If 64 bit, maybe not supported. Fyi, WIn7 64 not support for many previous software and hardware. Need to check the device support or not for Win 7 that you use.

May 14, 2010 | Logitech QuickCam Orbit Personal Web...

1 Answer

I cannot preview my video on my quickcam orbit mp


check the dm for enumeration, if the cam is present under imaging devices. uninstall all of the logitech software and plug camera in without the software. cam should come up generic USB device the try to preview in skype. if workinf reinstall sotware from the logitech websight.

Jul 10, 2009 | Logitech QuickCam Orbit MP 961422-0403...

1 Answer

When i hook up the USB in computer it shuts down


Reinstall or update the usb devices drivers.
doesnt work? try changing power supply

May 28, 2009 | Logitech QuickCam Orbit AF Webcam

1 Answer

Open in another application


Normal 0 This ptogram will eliminate your problem of the camera being busy or being used by another program. Really works great.

Double click on this site http://download.cnet.com/SplitCam/3000-2348_4-10500269.html
And then click on Download Now (3.5MB)

  1. Install Splitcam saying yes to everything during installation including the any warnings.

    2. Then run the Splitcam program by double clicking the downloaded program.

    3. Clicked on "Video" at the bottom right of the program window and selected your cmera.

Note: This will result in your camera being switched on and viewable in the
SplitCam program.

4. Opened up Skype (or other messengers) and go to "Tools" then "Options" then "Video settings."

5. Also setup your “Audio” while you are there.

6. Selected "SplitCam Capture" as my webcam, then click on save.

7. Webcam image will appeared in Skype or what ever messenger you are using.

Hope this Helps. Bud

Mar 27, 2009 | Logitech QuickCam Orbit Personal Web...

1 Answer

Logicon Webcam problems


Hi,

For Jrsmith210 :

Try using this :

http://www.logitech.com/index.cfm/support_downloads/downloads/?selectedcrid=492&selectedcid=3129#

Or

http://tinyurl.com/3j5nnv

You can get a manual from here :

http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/fattach_get.php?p_sid=O99QNy3j&p_li=&p_accessibility=0&p_redirect=&p_tbl=9&p_id=3610&p_created=1145058888&p_olh=0

Or

http://tinyurl.com/3tqaaq

Mac OS 10.4 or Above

To use a Logitech camera on your Mac OS X computer, please purchase a Logitech camera that is UVC compliant, this camera will have basic functionality for use with a third party application but no additional features will be available such as (Rightlight, Rightsound or Video Effects)

All UVC Complaint Webcams listed in table below

This article applies to the following platforms:
Macintosh OS X 10.4.9 - 10.5.2

The Logitech webcams listed below are UVC (Universal Video Class) compliant and can be used with operating systems which fully support this standard; including Mac OS 10.4.9 and above.

Please note that standard UVC drivers are provided by the Operating System and will provide minimal camera support only. Unique Logitech features, such as RightLight and Video Effects are not functional via UVC drivers.

Furthermore, we recommend the use of a full Logitech installation package, where available, for supported operating systems such as Windows XP and Windows Vista.

Camera Name                                       P/N
QuickCam Ultra Vision SE                 860-00023
QuickCam Ultra Vision                       861238
QuickCam Orbit/Sphere MP               861305
QuickCam Fusion                             861304
QuickCam Pro 5000                          861306
QuickCam Pro 9000                          861464
QuickCam Pro for Notebooks          860-000026
QuickCam for Notebooks Pro                861303
QuickCam Communicate Deluxe     861235
QuickCam Deluxe for Notebooks     860-000009
QuickCam Orbit AF                       860-000063

Try these, as the manufacturer's site is saying that the 3000 is not compatibl with Mac OS.

For Guest :

You can download the software from here :

http://www.logitech.com/index.cfm/480/3359&cl=in,en

Select the opeating system, download, install and use.

Good Luck.

Live, Love, Laugh.

Apr 14, 2008 | Logitech Webcam

1 Answer

Drivers and software for logitech quickcam Orbit MP


Normal 0 Go to this site
http://www.logitech.com/index.cfm/support_downloads/&cl=us,en
Then
Search by Image
or
Search by Name
and
Product Name.
This will then take you to the next window where you need to select your
Operating System. Then you will get your download driver.
Hope this helps. Bud

Jan 12, 2008 | Computers & Internet

Not finding what you are looking for?
Logitech QuickCam Fusion Webcam Logo

2,030 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2658 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...