Code for unlocking dvd regions samsung r155

Hi!

Take a look here, or here...

Regards,
Pelu.

Hi,

Visit the following link..
http://www.dvd365.net/

It contains all the unlocking codes, depending upon the DVD player you use

Please rate this solution
RNJ VINODKUMAR

you can go to samsung.com and on the top right corner there's a search box, go ahead and type in your model number and you are going to get 3 results. click on the 3rd link that says downloads and user manual. from there it will take you to the download center and you will see that you can download manual from a pdf file usinf adobe acrobat reader. or you can call samsung directly to have them send you one by mail.

The PDF of the User's Manual can be retrieved from the Internet address below:

http://downloadcenter.samsung.com/content/UM/200702/20070205095454562_01317A-01-R155-XAA-ENG-BM.pdf


Dr. F. Kohnstein

Region codes for Samsung:

RC 1: 2, 9, 3, 3, 4
RC 2: 3, 8, 7, 6, 7 (or 5, 7, 5, 3, 8)
RC 3: 5, 6, 7, 3, 2
RC 4: 7, 6, 8, 8, 4
RC 5: 5, 3, 8, 1, 4
RC 6: 2, 4, 4, 6, 2

1.Turn on R155 without disc inserted
2. Press and hold Play and Stop for 5 seconds then release
3. Press menu
4. enter code for current region as above i.e if you have a region 4 type: 7, 6, 8, 8, 4
5. The region is displayed in the top right.
6. You have about 5 seconds to enter the new region (1,2,3,4,5,6 or 9 for multiregional)

Works just fine on my region 4 R155. Hope this helps.

yes you can

copied this info from Samsung.com

Note: A DVD or Blu-ray player's region code is incorporated into the firmware by the manufacturer. The region code cannot be changed by the customer. Any attempt to change a region code may result in firmware damage. Firmware damage is not covered under warranty

Sounds like you recorded from a camcorder attached to AV2 (front of DVD player). Press the STOP button, then open the menu and finalize the disk.

Check Samsung web site for a firmware update. Don't know if this is your problem but the firmware may help.

hi give this ago works fine on us or uk


1. Press the Menu button on your remote control
2. Press the 5 button on your remote control
3. Press the 7 button on your remote control
4. Press the 5 button on your remote control
5. Press the 3 button on your remote control
6. Press the 8 button on your remote control
7. The currently selected region will be indicated on the onscreen display
8. Press the 1 button on your remote control for region 1, the 2 button for region 2, and so on, or the 9 button for multi-region playback
9. Press the Menu button on your remote control
10. Press the Menu button on your remote control

Tested and Worked on my UK player (Region 2).
also works on r136 and r150