Question about Denon S-101 System

Open Question

I am having a difficult time with my denon s-101 and watching tv in surround sound

The system is great and works well so far. The dvd player works fine. the problem is I am trying to watch regular tv and cannot get the aux to output any sound. The instructions for the sony tv 60" 3lcd say if I am hooking up surround sound that I should disable the speakers on the the tv itself. i had done that, but still did not get any sound out of the denon system. I tried hooking up the rca connections per the instructions and still cant get it. I dont have cable or satellite. We dont watch much tv, but when we do I have an HD antenna which works well. Any kind of advice would be great.

Posted by on

  • Anonymous Jul 20, 2008

    we have a samsung tv and home theatre system and i played with it for five hours yesterday still can only get sound out of dvd player.also have reg.tv but cant get sound when it is on.cant figure it out it driving me crazy.

×

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Drummernick
  • 440 Answers

SOURCE: neen instructions on my denon s-101 system

www.denon.com they have one if not on ther site please email there ther tech dep request manual in a pdf file in email ok they will take care of u i dont see any online justto show u

Posted on Feb 03, 2008

Ad
mlapres
  • 757 Answers

SOURCE: Denon avr-587

Make sure that the volume is not muted or too low on the TV...the TV volume output to your receiver will be performing the function of a pre-amp to your receiver. Then select the appropriate input on the receiver that you have the TV audio connected to.

Posted on Jul 17, 2010

dunnbiker
  • 8546 Answers

SOURCE: I am trying to hook

If the speakers work with test tones this has nothing to do with them and all to do with your attachment and setup of the sources.

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Denon-AVR-1804-Receivers-manual/id/363bh837/t/2/

Stop guessing. Have you looked at all the manuals?

The other devices you're inquiring about are not named in your post. Name the makes and models first, then we'll look for the manuals. Then (maybe) find a solution. You could run them by the manufacturers' support sites or these guys...

retrevo.com
audio.manualsonline.com
hifiengine.com
usermanualguide.com
Google search: "(product) manual"

Posted on Apr 18, 2011

dunnbiker
  • 8546 Answers

SOURCE: I have a Denon AVR-3300,

The best audio for any source will always come digitally from the first device in which it appears. The Cable Box would be that device.

Posted on Aug 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rca model rtd3266 won't produce aux audio through the tv even though we have hooked up the red and white cables. It only playes the surround sound when you watch the dvd.


I believe you have misunderstood something. The audio output from your TV is stereo. Your RCA system produces surround output from your TVs stereo input.

Nov 30, 2013 | RCA DRC277 DVD Player

1 Answer

Fiber optic wire hooked to Denon AVR 1706


Go to page 19 in this manual - it should get you to where you want it to be.
http://a248.e.akamai.net/pix.crutchfield.com/Manuals/033/033AV1706B.PDF

Good luck!

Dec 12, 2011 | Denon Audio Players & Recorders

1 Answer

Denon avr-587


Make sure that the volume is not muted or too low on the TV...the TV volume output to your receiver will be performing the function of a pre-amp to your receiver. Then select the appropriate input on the receiver that you have the TV audio connected to.

Jul 17, 2010 | Denon AVR-587

1 Answer

I have a vizio tv, sony dvd player and direct tv. i also have a denon avr-1905/785 surround sound receiver. i can't get the surrond sound to work while watching tv but it be comes through if i am watching...


If your TV has audio out and your surround sound has an audio in you need to get a lead to connect them together, most of them have - then you just select the Aux on the DVD/surround player (or whatever the input is called on the back) and everything comes through your speakers. If you only have headphone out jack on the TV it will mean you won't have your TV speakers working. I hope this is not really obvious to you and it was the first thing you tried!

May 05, 2009 | Audio Players & Recorders

1 Answer

Dish Network connection and surround sound


HI, connect audio output from tv to system,you may have to turn this on or turn up in tv menu for some sharp tvs,this should get sound for tv and dvd and anything else you hook up to tv.

Hope this helps.
CABLE GUY.

Mar 29, 2009 | Audio Players & Recorders

1 Answer

Problem getting the best surround sound when watching a dvd


THE BEST SOUND IS WHAT SOUNDS BEST TO YOU, HOWEVER DO THIS:
1, USING THE SETUP MIC CONFIGURE YOUR DENON, PAGE 8 OF THE MANUAL. NEXT
2. RAISE THE REAR SPKR LEVELS, PAGE 46,47. NEXT
3. WHEN LISTENING TO AUDIO CD OR RADIO TRY THE 5 CH STEREO DSP MODE.
4. WHEN WATCHING A DVD USE DSP DOLBY PROLOGIC OR TRY 5CH STEREO IF THE MOVIE IS MOSTLY TALKING.
5, TRY 5CH STEREO WHEN WATCHING PROGRAMS WITH MOSTLY TALKING

Mar 01, 2009 | Denon AVR-2106 Receiver

1 Answer

Surround sound ok whilst playing dvd but not working for tv


On your Sagem TV you should have two RCA ouputs (red and white connection usually marked ouput) ) Connect these to the input on the surround system using the interlink cable.

You should then be able to hear the sound from the TV by changing the SOURCE on the home cinema remote.

Better still if you have a digital out on your TV use that instead.

Nov 25, 2008 | Audio Players & Recorders

1 Answer

Surround sound hookup question?


It looks like all you'll need to do is hook up audio out from DirecTV to audio in on the surround sound system. Sony has an interesting hookup recommendation guide on the product support site:

http://esupport.sony.com/US/perl/model-home.pl?mdl=DAVC700&LOC=3

That should give you the connection options. The short answer, though, is to connect the best audio out from DirecTV to an audio in on the surround sound and then choose that option in the surround sound system when you want to watch TV.

Jul 16, 2008 | Sony DAV-X1 System

1 Answer

How do I get surround sound from TV?


see if ur DVD player has a TV/Audio in....you have to set it up so u watch TV threw your DVD player (if you have one of of the Surround Sound in a box systems) if you have SS w/ a receiver then you'd have to run Audio out from your TV/Cable/Satellite to the receiver for it to work

Feb 02, 2008 | Jensen JHT805 System

Not finding what you are looking for?
Denon S-101 System Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5554 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...