Question about OKI C3400n Laser Printer

1 Answer

How do you rest an OKI c3530 image drum

Does anyone know how to reset an OKI c3530 image drum?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

Turn off the printer
Turn the printer on whilst holding down Menu button. (Display says user maintenance.)
Press the menu button three times. (The display will say drum counter reset.)
Press enter key. The system should go back on line, if not press on-line key.

You can just put a new fuse on the drum.
When you insert the drum the machine resets the counter and then blows the fuse. So if the unit is ok and you just wish to run it through another cycle just change the fuse.
This means you cannot just put a full unit in from another machine as it will not reset the counter until you put a new fuse in it as you found out.
This applies to drums transfer belt etc.
Note with regard to refilling the toner, some printers have 2 sections. 1 where you put the fresh toner and an after collection section in the same unit. You must empty the 2nd section if you refill it more than 2 or 3 times


Posted on Oct 07, 2009

Testimonial: "Great fast response."

  • thomas713
    thomas713 Feb 13, 2012

    were is the menu button on a c3530 mfp???

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

OKI B410dn drum life


Every Oki B410d printer, Oki B410dn, Oki B430d, Oki B430dn, Oki B440dn, Oki MB460, Oki MB470, Oki MB480 are contacting the module of the Oki 43979002 drum and fuse with chip developed in the module imaging unit through joints being in the bottom part of a printer like in a photo. Eksploatacja Oki B410 pochodne drukarki reset kasowanie bbna

Jan 28, 2014 | Oki Electric Industry C8600n Led Printer

1 Answer

I have an oki c3530 and it is making a terrible grinding noise, any ideas?


One of the drums needs to be replaced. Systematically remove one at a time until the grinding noise no longer happens, then replace that drum.

Jan 26, 2010 | OKI C3530N Color MFP Printer

1 Answer

Resetting image drum after replacing for oki b4600


On the printer press the menu button until you reach MAINT.Then press the item + button until you reach DRUM CT RESET. Then press select.YOUR DONE

Oct 03, 2009 | OKI B4600 Printer

1 Answer

Oki b4600 displays check image drum toner senror error


Try this:

Press Online
Press Menu repeatedly until MAINTE MENU displays. Press Select.
Press Item+ until DRUM CNT RESET displays.
Press Select.

Jul 01, 2009 | OKI B4600n Printer

2 Answers

Oki b4600 drum reset ?


On the printer press the menu button until you reach MAINT.Then press the item + button until you reach DRUM CT RESET. Then press select.YOUR DONE!!!!!!!!

Jun 19, 2009 | OKI B4600 Printer

1 Answer

Error message after installing new tonner


Check the little switch/door on the left hand side of the drums.
This has worked successfully for me.

Symptom:
After replacement of a C3530 Image Drum, the message, "Toner Sensor Error" is displayed.

0.10a?openelement&fieldelemformat=gif




Cause:
The plastic shutter in the ID is fully or partially covering the toner sensor window.




Resolution:
Move the cover upward to allow for the sensor to become fully exposed prior to reinstalling the drum.

0.106?openelement&fieldelemformat=gif

Oct 30, 2008 | OKI KIT-C3530N MFP LASER CLR P/S/C/F USB...

1 Answer

Toner sensor error on an Oki C3520 Laser


Check the little switch/door on the right hand side of the drums.
This has worked successfully for me.

Symptom:
After replacement of a C3530 Image Drum, the message, "Toner Sensor Error" is displayed.

0.10a?openelement&fieldelemformat=gif




Cause:
The plastic shutter in the ID is fully or partially covering the toner sensor window.




Resolution:
Move the cover upward to allow for the sensor to become fully exposed prior to reinstalling the drum.

0.106?openelement&fieldelemformat=gif











moz-screenshot-2.jpg

Oct 18, 2008 | OKI Electric Industry C3520 Laser Printer

3 Answers

Toner sensor error after replacing cartrige...


Hopefully this will clear up a little confusion I had:

1. Follow instructions for replacing toner cartridge.
2. Remove drum from printer. Take care not to handle the drum surface. Look for a small rectangular window or depression. The window will be completely or partially blocked by a flap.
3. Use a fine pointed instrument to move the flap up, so that the sensor underneath is visible.
4. Replace the drum. The error should clear after the print engine has reset.

Sep 09, 2008 | OKI KIT-C3530N MFP LASER CLR P/S/C/F USB...

1 Answer

Okipage 8w print drum


To reset the drum counter on these it can be done by this
link to oki 8w Image Drum Cartridge instructions

http://my.okidata.com/man-8w.NSF/MOCContents/5577D9A2FD2AC576852566C100507580?OpenDocument

or if I explain it, go to printers and faxs on your pc find the oki icon for your printer right click it and propertys.... go to printing preference tab, look in there....

If you are having image problems with new drum, I doubt any reset will help.

Post back any issues or check link below chapter 5
http://my.okidata.com/man-8w.NSF/InsideUsersManual?OpenFrameSet

Nov 13, 2007 | OKIPAGE 8W Led Printer

Not finding what you are looking for?
OKI C3400n Laser Printer Logo

4,374 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

386 Answers

Jimbras

Level 1 Expert

13 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...