Question about Hitachi 53UDX10B 53" Rear Projection Television

1 Answer

Blue and Ywllow ghost

Magic Focus displays a 4. During BLue focus, only half the bars shows and they are shorter as it get to the middle. When a show is on the blue and yellow are round at the bottom and top and scattered throughtout the screen.

Posted by on

  • cincymike Dec 29, 2007

    Same problem today during the basketball game...set is 6 years old....I am getting quotes from $200 - $400 to repair.



    Is it easy to do yourself?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 232 Answers

Hi, you need to replace the convergence IC`s and any burnt resistors in front of the IC`s, common with all big screen rear projection tv`s, if you attempt to do this yourself be sure to get original IC`s or your just wasting your time, and it will take you 2 hours easy, any questions email me back, BMW Rider

Posted on Dec 28, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have epson emp700 projector - blue horizontal bars comming in picture but when i adjust the focus it goes but picture shows outof focus


i didn't get your question well. so you have good picture with blue horizontal bars. and when you change focus you have out of focus picture with no bars ?
try to do factory reset cos it seems like you have some settings wrong.
after that try to see if bars coming with signal connected or no.
if its only with signal try different cable and different input.

Mar 29, 2011 | Epson Projector Lamp for EMP-500, EMP-700

1 Answer

Magic Focus will run for the red blue and when it gets to the green will go half the way up then will stop. a green number 4 shows at the right side of the screen and the picture comes back still out of...


Press the Magic Focus button,will not solved ur tv convergence problems.Ur tv 100% have an convergence problems,it dead.The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 03, 2010 | Hitachi 51F500 51" Rear Projection...

1 Answer

Colors are not aligned Magic focus ?


The magic focus will stop if there is a bad sensor and or a problem in the convergence circuit.

This set uses two STK-392-110 convergence chips--both along with any of the resistors that protect them need to be replaced and the set adjusted--I have repaired hundreds of these sets----


Confirm model number----and if you go into the customer menu and either red or blue will not move in any or some direction--the chips have to be replaced---LET ME KNOW WHAT YOU FIND AND I CAN GIVE YOU FAIRLY DETAILED INSTRUCTIONS ON WHERE TO GET THE PARTS AND WHAT IS INVOLVED IN THIS REPAIR.

I am here to help people--

REGARDS, SD TECH

Oct 02, 2009 | Hitachi 43UWX10B 43" Rear Projection...

2 Answers

Hitachi with blue out of focus or ghost imaging and have tried magic focus many times!


http://www.keohi.com/keohihdtv/learnabout/generaltips/screenoptics/cleaningtheoptics.html

Mar 01, 2008 | Hitachi 53UDX10B 53" Rear Projection...

2 Answers

Blue and Green Bar


run magic focus, If you get a error 4 during the magic focus, that is often an issue with the convergence

Feb 01, 2008 | Hitachi 51F500 51" Rear Projection...

1 Answer

Hitachi 57SWX20B 'blue ghost'


bad convergence ic.
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Jan 14, 2008 | Hitachi 57SWX20B 57" Rear Projection...

1 Answer

Out of focus


Rach, if it doesn`t move from green to red to blue in Magic Focus then there is a problem with the convergence IC`s and probably one or more support resisters. These components will have to be replaced, questions? ask away, BMW Rider

Dec 14, 2007 | Hitachi 57F500 57" Rear Projection...

1 Answer

Hit 53UWX10BA


convergance ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm

Dec 14, 2007 | Hitachi 57SWX20B 57" Rear Projection...

1 Answer

Loss of color picture


I have a blue-ish yellow ghost tint which just appeared on my 51" 51SWX20B made July 2002. Did the magic focus got a number 5 at the end. Did you get a number when you did the magic focus?

Dec 01, 2007 | Hitachi 51SWX20B 51" Rear Projection...

Not finding what you are looking for?
Hitachi 53UDX10B 53" Rear Projection Television Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2336 Answers

The Knight
The Knight

Level 3 Expert

75871 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...