Question about Speakers & Subwoofers

Open Question

Pioneer Htv-c2 hookup a pioneer htv-c2

Posted by on

1 Suggested Answer

  • 1 Answer

SOURCE: bose 901 equalizer hookup

I had the same problem- I have a Pioneer VSX-518 and Bose 901 series IV. My receiver has no "Tape Monitor", so after trying different hook ups, I went and bought a "3 input video switcher" (about $10.00) I run my STB (cable box), my PS3 and my computer through the inputs of the switcher (just the audio L/R) then the output to the Bose EQ input, then from the Bose EQ output to my receiver input (I chose to use the TV/DVR input). Now I just have to select which source I want to listen to from the switch, make sure the receiver is set to TV/DVR and I have fantastic sound via my Bose 901s. With this hookup, I have my 3 componets video connected to my HDTV via HDMI cable. It works for me. Hope this helps.

Posted on Jun 25, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Where can I find a used manual for a pioneer v s x d 901 s receiver

Just do an internet search using the same question that you asked

Aug 12, 2015 | Pioneer Speakers & Subwoofers

1 Answer

What is the impedance of the midrange speaker and the tweeter speaker in the Pioneer cs r5100 ? I have the crossovers and the woofers I use for my front channels (L&R)

If you are running three 8 ohm speakers in parallel then the total impedance would be 2.667. If running two 8 ohm and one 6 ohm speaker in parallel you would have 2.4 ohms. This will burn out your amp pretty quick. And very possible won't play at all. Though I have never attempted to play a home amp down that low in ohms. Guessing you may have an older model Denon type amp.

Aug 01, 2014 | Pioneer Speakers & Subwoofers

1 Answer

What is the wattage breakdown for each speaker on my pair of Pioneer CS-N575 3 way speaker towers (I know the total max power combined output is 150 Watts)?

It's the woofer that will use almost all from this 150 W so if you replace woofer take one of 8 ohm which can handle 150 W and you done

Jul 15, 2014 | Pioneer Speakers & Subwoofers

1 Answer

I have ancient but good condition Pioneer M90 and C90 amplifiers and Bose 901 speakers, but have never been able to get decent bass reponse. Is this a hookup problem or a compatibility problem?

If it's connected properly AND directly between the preamp and the amp it WILL sound very good across the band. The Active EQ also has sliders for tweaking the tone. If you vary them and hear no change it is NOT connected correctly.

Get the manual at It lists several connection scenarios.

Jan 07, 2011 | Bose 901 VI Main / Stereo Speaker

1 Answer

My subwoofer stop working

I have a Sony 46" LCD TV. I have a Direct TV HD converter box, a Sony Blu-Ray BDP-S360 Blu-Ray player, and a Pioneer DVD-Audio player connected to my Pioneer Elite Home Theater receiver. I have my Pioneer DVD-A player connected via Fiber-Optic cable. When i play a DVD or a DVD-A on my Pioneer DVD-A player, all of my speakers work fine, but when i play a dvd on my blu-ray player, all the speakers work except my subwoofer. How can I fix this problem?

Jul 03, 2009 | Aspire Digital AD-225PSC Subwoofer

1 Answer

I have a klh asw120 subwoofer annd a pioneer receiver. the hookups behind the receiver has one output and the subwfr has a l & r input. does this need a y splitter or is there a certain way to connect...

On the subwoofer's L&R input, you'll see a tiny "mono" next to the Left input. Hook up your receiver's single sub output to this jack and you're all set.

Jun 09, 2009 | KLH ASW10-120 Subwoofer

1 Answer

Pioneer cs-g404

My experience with them is that they would work as they don't change much from model to model year. You may call the customer support and they will most likely help you
try CS @ 800-421-1404 or try the parts hotline to investigate
(800) 228-7221

Mar 15, 2009 | Pioneer CS-G204 Speaker

1 Answer

Cant get sound out of the receiver on the sat input

Have you selected the appropriate input type? (e.g. Optical, HDMI?)

Some receivers (like my Onkyo 606) support HDMI passthrough, but will not decode audio signals from HDMI. Making it a pretty useless port!

Do you get sound when you select FM Tuner on the Pioneer?

Nov 22, 2008 | Velodyne CT-80 Subwoofer

2 Answers

Bose 901 equalizer hookup

how do I hook up the bose 901 EQ to a yamaha DSP3090??

Nov 08, 2008 | Bose 901 VI Main / Stereo Speaker

Not finding what you are looking for?
Speakers & Subwoofers Logo

Related Topics:

352 people viewed this question

Ask a Question

Usually answered in minutes!

Top Speakers & Subwoofers Experts


Level 3 Expert

4502 Answers

Michael Edwards
Michael Edwards

Level 1 Expert

53 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides