Question about Dynex 32 in. LCD Flat-Panel HDTV

1 Answer

TV worked fine one night, next day screen is white.

The screen was all good when i went to bed one night and then the next day i turned the TV on and it was mostly white with a faint picture of the program in the backround. volume still works. the TV is a 32' DYNEX LCD-09

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 157 Answers

The LCD Panel failed. There is no easy fix but try to get the T-Con board to fix the issue. However, this part is usually only available with the whole LCD Panel. This is usually the most expensive part in the TV and the whole TV needs to be taken apart to replace the panel.

Might be economically viable if you can find a place that carrys the T-con but Dynex parts are usually hard to find. The LCD Panel part alone will exceed the cost of the TV.

Posted on Oct 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi cold 3.0 v6 workshop manuals


If your philips tv keeps losing it's stations when you switch it off, this my be a solution -----my 42" tv would need to be retuned every time I wanted to watch it this fault just started over night it was all working fine then sat down to watch tv and had to retune tv from scratch I could then watch telly all night fine change channels no probs all great switch it off next day retune and so it went on if you have this problem switch telly on then hold in menu button on tv until screen goes black (this reboots software) then retune tv as normal it will ask if you want a full retune (yes) when this is complete digital and analogue your tv should now remember channels when switched off and work as it used to ----( Hope this helps you if you have had this problem it worked for me ). Good Luck

May 29, 2014 | Televison & Video

1 Answer

My sony trinitron is blinking red and won't turn on


THIS IS NORMALY CAPACITORS IN THE POWER SUPPLY THAT NEED REPLACING

Jun 25, 2013 | Sony FD Trinitron WEGA KV-34HS510 34" TV

1 Answer

I have a JVC model HD-52G886 tv. that loses sound.


Replace or have replaced the Audio board in the set----a lot of them fail.

Mar 12, 2012 | JVC HD-52G786 52" Rear Projection HDTV

1 Answer

Lg50pc1d purple screen


try to unplug the set for a period of time?

Mar 12, 2012 | LG Televison & Video

2 Answers

Mitsubishi WT-42313 42 in. rear projection tv


I guess I have to pay money for a solution, which is not what this website says. The only answer I got was pay money and we'll tell you. Is that true/

Sep 16, 2008 | Mitsubishi WT-42313 42" Rear Projection...

1 Answer

No Picture


How many hours on the projector lamp? It is possible that it just reached the end of it's life. Most lamps have a life of somewhere between 4000 to 6000 hours of life. If your TV has PIP, try going to that mode. If you can see a picture in any of the PIP modes the lamp is OK. If that works, then it is probably a hardware issue on the video board. A service tech will have to diagnose your issue. Let us know the outcome and good luck.

Aug 23, 2008 | Hitachi 43FDX01B TV

1 Answer

Messed up Image


You need to replace both of the convergence ICs. They are both STK392-570 you can get replacement ICs at the following link and they provide free instalation instructions with pictures on how to replace the ICs. Here is the link.
http://servicemanuals.vstore.ca/

Jul 08, 2008 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Changes Channels


Need to know model number and date of manu.  You may have bad control assy due to spills or cleaning of screen and liquid went into screen and buttons. will effect remote also
www.classtorations.com

Jun 03, 2008 | RCA P52937 52" Rear Projection Television

2 Answers

Messed up Image


bad connection on convergence amps or need to replace them

Oct 11, 2007 | Mitsubishi VS-50805 50" Rear Projection...

Not finding what you are looking for?
Dynex 32 in. LCD Flat-Panel HDTV Logo

786 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

Cindy Wells

Level 3 Expert

5056 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Dynex Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...