Question about Sony Bravia KDL-46V4100 46 in. LCD HDTV

1 Answer

Sound doesn't work on television. Worked fine yesterday and doesn't work today. I can hear sound from the cable box going to my surround sound, however nothing to the television. I know the power went off today because I have flashing clocks throughout my house however it must have only last a few seconds because the times are not off just blinking.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 157 Answers

Sounds like there was a power surge that caused the audio processor in the TV to go out. This is fixed by replacing the main board.

The power supply board in the TV should also be checked as that could have been damaged as well. These are usually the first to go out from a power surge. Get a good surge protector to help prevent this in the future.

Posted on Oct 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

RCA model rtd3266


Quick and dirty:

From the back of the RCA unit make sure you are using the auxiliary input jacks to connect to the output jacks on the TV.

You will need to go into the setup menu on your TV to select an external sound system and finally you'll need to select auxiliary on the RCA unit to hear the sound from your TV.

Hope this helps,

The Tinker

Nov 30, 2013 | RCA Televison & Video

1 Answer

Try to go digital optical out to a receiver for surround sound (also Samsung) but not sound comes out. Tested it with a Samsung Blu-Ray player digital optical out, and it worked.... is this a problem with...


The digital audio outputs on televisions sometimes only work when the television is on certain inputs. It does not always work with all hdmi connected devices. I can almost guarantee you that if you connected an over the air antenna to this television and scanned for your free local television channels the digital optical out between the tv and the surround sound would work.Likewise if you have Comcast or one of the other cable carriers that has digital cable you could connect the coax cable directly between the television and the cable wall outlet without the cable box and get sound from the tv's digital audio output to the surround sound.

However there might be a digital audio output television setting you have not changed. Refer to the manual for that or call customer service if necessary.

Jun 10, 2011 | Televison & Video

1 Answer

No surround sound when attaching hdmi to TV


Try running the optical TOSLINK cable from the TV to the receiver. If the TV doen't have a digital optical output, then try going into the menu on your cable box and setting the audio output to the digital optical out. Also check your TV menu and make sure NETCOMMAND is diabled. Some of your newer HDTV have Netcommand that allows the TV to control other devices through the HDMI cable.

Dec 15, 2008 | Sharp LC52SB55U LCD TV

5 Answers

REGENT MODEL HT391 SURROUND SYSTEM


i need to know how to hook up my home theater to my TV and Dvd.

Oct 04, 2008 | Durabrand HT-3915 System

1 Answer

How do I get my tv to play through the surround sound


If you have direct cable into the television, you will need to use an audio output if available on the back of your set into your HT system.

If you are using cable w/ a cable box you have two options. You can still connect everything directly into the TV then reroute the audio to the HT system... or, you could hook only video to the TV and audio from the cable box to the HT system. Really up to you.

Mar 04, 2008 | Panasonic SC-HT680 System

Not finding what you are looking for?
Sony Bravia KDL-46V4100 46 in. LCD HDTV Logo

1,312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...