Question about StorCase 2 Bays Data Silo DS320 Storage Cabinet

4 Answers

Users gude I Recently found a 1977 optonica stereo amplifier model # Sm-4646 in the back of my garage it is still in new condition and i just wanted to find a users guide so i can find out what it's output is and how many watts it is

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: users gude


Posted on Mar 17, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: users gude

I have one
i replace the original ic with stk0080 (pin assing different)
if somebody want to repair a death optonica sm-4646 just e-mail me.

Posted on Sep 12, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers
Re: users gude

Please follow this link to some information on the Optonica SM4646 Amplifier. I hope you can read German!

Posted on Aug 12, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 85 Answers
Re: users gude

I couldn't find anything on this optonica stereo company, and do you need to know how many watts it really is? Why don't you just plug it in and see how LOUD IT GETS!!!!

Posted on Mar 15, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My 8gb drive doesn't respond to my pc it appears to my computer but when i want to make any change to the data in it ,it answers that it can't do it untill it get administration from the pc <what i

Computer administrators have access to make certain changes on a computer that other users may not have.

Administrators have full freedom to install and uninstall programs, move files around and make changes to the Windows registry.

There are actually three ways that one may become the administrator on their computer; during the initial setup, change the settings in the Control Panel or by having the current administrator change the permissions on the account.

Set up an account during the initial setup of Windows on the computer.

During the setup wizard, you will be asked to set up an administrator account.
Choose the account name, user icon and password to set up the administrator account.

Step 1.
Change your account permissions if there isn't an administrator account currently setup.
During some installations Windows users were allowed to install the program without setting up an administrator account.

Click on "Start" then "Control Panel" to open the Control Panel.

Click on "Users and Accounts" or "Users Accounts and Family Safety".
Click on "User Accounts."

Click on "Add or remove user accounts" then "create a new account".

Assign the new account administrative privileges, a user name and password.
Click "OK" and close all windows.

Log in under the new Administrator account.
Have the current administrator change your account privileges from "User" to "Administrator".

She can do this by following the same steps described in Step 1.
Instead of creating a new account, she must click on your current account and then apply the new permissions.

If you do not currently have an account on the computer, she will need to create you one.

Jan 16, 2014 | Vantec 1 Bay NexStar 3 USB 2.0 External...

1 Answer

How do I delete all the info backed up on my irocks external hard drive?

Usually hard drive disks are erasable so long as was an an empty space. However, the type of setting chosen during data encription causes the situation of erasability. For example, using an external harddrive disk as back up media storage media has specific requirements. The computer provides an integral means of least being compromised where data permanent encription may have been the options available during backup copying. The compoter provides the procedures of recording data into any connected external devices. Once the external device is reconnected to the computer, the options of requesting the user to either erase what has already been copied becomes one of the several displayable promps. Also, backup disks usually on connection to the computer assumes a necessity to restore to functioning mode. However, a least malfunctioning computer would simply display prompts asking the computer user to perform the most recent backup, or disregard because of least disfunction recognised from the system. Attempting is erase what has already been recorded becomes appropiate whenever the computer recognises any curroption of the files. A prompt is display asking to fix errors soon after connection. The computer user simple chooses to restore to default functionality the external hardrive. Amongs the options usually provided of the program prompt are format, delete, restore, or backup computer files once connection is recognised. keep in mind that, an external hard disk may be default rrecordable proving no options of erasing. Refer to the hard disk drive user guide as reference to achieve the process. Also, the user guide would have specified if the device is capable of alternations or not.

Jan 14, 2011 | i-rocks External Hard Drive Enclosure -...

1 Answer

I hook up the sata bridge adaptor and my computer is not reconizing the the hard drive is even there i can hook it up to ide and it works fine just wont work with the bridge

The bridge has a jumper I believe next to where the powerplug is. This jumper must be pulled out and put on the A-B NOT the A-C if youare going to use the IDE ribbon cable. Another trick is do not use the IDEcable (extra) that you may have with or below or above your other harddrivesince bios will always keep trying to go to your SATA drive even when youchange your primary drive with working operating system to slave and changeboot order....will just show on screen something like no boot disc. The easiestway without messing with the bios and drivers and all is this....move jumper toA-C then use one of the IDE cables that you have (you should have 2) of youCD-ROM. If you are using 2 CD-ROM's remove one and plug this IDE cable intoyour SATA bridge. The computer will now find new hardware. Then right clickthat new found drive when you click "My Computer" from"Start" and "Format" it, just to make sure everything is off thedrive even if new it will not hurt. Not sure if you want your SATA to be yourprimary drive but if you do,you now can use Acronis Ghost software or other tomirror your primary drive onto your new SATA. Once done take out or dissconnectyour primary drive and install your SATA into that slot or above or below yourprimary drive if you have available room in your tower then hook that IDE cableto your SATA and hook power. BAM.. your computer will now use the SATA to bootup and all is fine. Remember SATA does not have slave/master jumpers like IDEdrives. Now if anything happens to that SATA you still have you disconnectedprimary drive to fall back on. If your concerned about wanting 2 drives you maybe able to take your original primary drive and change that jumper from Masterto Slave.Since bios will default to your new SATA drive now and use that hasyour master and boot up from that drive. If you do not want to use yourSATA as your primary without installing an operating system or usingghost/mirror software then to make life easier just use the IDE cable from oneof the CD-ROM's or get an extension IDE cable that will reach since your SATAdrive is smaller and most likely will not neatly fit into the CD-ROM slots. Youcan use the extra slot if you have one above or below your primary drive yourusing now, then plug your CD-ROM IDE cable (with extension if needed to reach)into SATA and then you can now use the SATA to send files and anything else youwant to store in that drive. Hope this helps.

Dec 29, 2010 | Kingwin SATA to IDE Bridge Board (ADP06)...

1 Answer


I lost a user manual a while ago and managed to find this company, who were really good. They found my manual and emailed it to me in about 3 hours, cost me about £3 which I thought was resonable.
Hope this helps.

Sep 21, 2010 | Antec MX25 Aluminum Hard Drive Enclosure...

1 Answer

I have a NexStar 3 external hard drive that is not being recognized by my computer. It used to work now it gives an unknown device message

remove the hard drive restart your computer the plug the hard drive back into your usb port this should come up with new hard ware found and install the driver If not try a different usb port or your sata drive

Mar 30, 2010 | Vantec NexStar-3 External 3.5inch...

1 Answer

Looking for best deal on DNS-323 + 3TB hard drive

My personal choice would be for Western Digital green series drives

7200 RPM drives with as large a CACHE as possible would be the main part of my specs.

Faster speeds are becoming available but they are still quite new technology so just for now you might want to cross them off the list too

Seagate has taken some hits recently with firmware issues so for the moment they would not be on my list either

SATA interface hard drives ar the only ones supported by this unit so other than what I have said the choice is quite large.

Aug 21, 2009 | D-Link DNS-323 2-Bay Network Storage...

1 Answer

Bsod problem due to reliance lxu 800 usb modem drivers

Hello dear, I'm one of the users of LXU 800 modem. I tried all the sources and found there is no way resolving this issue because the manufacturer has not yet released any updates till now. I also heard the team at Reliance doesn't care about this issue because the actual manufacturer is LG. Anything to share? Meet me at Have a great day. Yours truly, N Bhargav Reddy.

Aug 15, 2009 | Hard Drive Accessories

1 Answer

Getting recorded data from my Hard Drive asking to be formatted!

Ok,Download software for recover your data from Memory Card, Phone, HDD or any other Storage Device ----
Download from the following link ------

Note- this software is works only with windows operating system so, connect your Memory Card, Phone, HDD or any other Storage Device to computer to recover data.

For any other help contact me.


Dec 09, 2008 | Adaptec 1 Bay ACS-100 (2177400) USB 2.0...

1 Answer

OSX 10.4.10 Driver

It doesn't appear that there is one current for 10.4.10. If you cannot locate one via contacting tech support, you may need to archive and install, then search the Apple site for the Combo package where it was last working and stable.

Archive and install wil preserve your user settings and preferences, it just installs a new shell over the OS and reverts back.

Sep 10, 2007 | StorCase 2 Bays Data Stacker DS60 Storage...

Not finding what you are looking for?
StorCase 2 Bays Data Silo DS320 Storage Cabinet Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top StorCase Hard Drive Accessories Experts


Level 3 Expert

281 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 2 Expert

379 Answers

Are you a StorCase Hard Drive Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides