I have a all for one urc 4220 and zenith tv I need code and instructions thank you
Hello, follow this link to download the manual and the codes for your remotes:
http://www.ofausa.com/remote.php?type=URC4220
just right click and save as on the download links.
if this does not work you can try the search method,
you do
this by either holding down the device button eg: TV or if you have one
the "magic" button for three seconds, a light should then flash twice
to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)
Many thanks
Mark
(www.sparky-uk.com)
Posted on Dec 24, 2007
Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!
Posted on Jan 02, 2017
Oct 16, 2011 | One For All URC4220 Remote Control
on May 30, 2010 | One For All URC4220 Remote Control
on May 30, 2010 | One For All URC4220 Remote Control
Mar 07, 2011 | One For All URC4220 Remote Control
May 03, 2009 | One For All URC4220 Remote Control
.on May 30, 2010 | One For All URC4220 Remote Control
Mar 22, 2009 | One For All URC4220 Remote Control
Feb 13, 2008 | One For All URC4220 Remote Control
Feb 03, 2008 | One For All URC4220 Remote Control
Dec 03, 2007 | One For All URC4220 Remote Control
110 people viewed this question
Usually answered in minutes!
I have a zenith tv and I am trying to program my 4220 remote to operate
×