Question about HP Photosmart 2575 All-In-One InkJet Printer

1 Answer

When I turn on my computer and printer, message appears "installing driver". I then have to wait for this to finish and I then have another copy of the original software installed, called copy 1. This Happens often, and I then have copy 2, copy 3 etc. How can I stop this from happening.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 98 Answers

Remove all the printer icons in "Printers and Faxes" window. Make sure that your HP Photosmart 2575 driver disc is available or you can download it from HP.com website then go to "Supports and Downloads". Have to reinstall the driver of your printer so that the conflict will be gone. Thank you.

Posted on Oct 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a canon pixma mp 287 printer i have installed the drivers also and it is also not offline but when i am giving command to it then it is showing that printer is not responding.why it is showing like...


solution :
1. Uninstall driver printer and remove Printer USB cable from computer. After uninstall finish, restart printer.
2. Reinstall driver printer (don't connect printer USB cable to computer). Wait for the install process, until message "connect a printer USB cable to computer". After message appear, connect printer USB cable to computer.
3. Wait process install finish and try to print.

Sep 23, 2011 | Canon Pixma Mp250 Allinone Inkjet Photo...

Tip

HOW TO REINSTALL WINDOWS XP OR INSTALLING CLEAN COPY


How to reinstall Windows XP operating system or installing fresh copy of Windows XP on your computer.

If your Windows XP operating system had problem due to corrupted files, viruses problem or you want to upgrade your system. This procedure will guide you in reinstalling your current Windows XP or installing fresh copy.

After this installing process, you need all your hardware drivers like Chipset Intel driver, LAN driver, Sound driver, WAN driver, Webcam driver and others for the computer to be fully operational. Otherwise, do not proceed on reinstalling you operating system if your do not have those hardware drivers.

CDROM drive is required for installing Windows XP. If you don't have in your notebook computer, use external CDROM drive to connect in your computer using a USB cable.


1. To start with, you need to back up your in blank CD all your important files before you begin installation produre because all the data will be wipe out.

2. When ready, start your computer and when booting press F2 to
BIOS setting.

3. On BIOS menu, choose the BOOT setting and change the priority boot to CDROM, exit and save.

In some laptops, you can skip this BIOS setting process by repeatedly pressing F9 key or F10key when booting your computer and it will run boot priority on CD.

4. Once you exit from BIOS, you computer will reboot and a message will appear " Press any key to boot from CD", press any key to enter into WINDOWS XP SET UP.

5. Belows instruction messages will appear:

* To set up Windows XP now, press ENTER
* To repair Windows XP installation using recovery console, press R
* To quit set up without installing Windows XP, press F3

Press ENTER to initiate the installation.

6. You will go to Windows XP license agreement and press F8 to agree.

7. You will ask you if you want to REPAIR or REINSTALL the operating system. It will appear like this. Just press ESC to proceed.

A. To repair the selected Windows XP installation, press R.
B. To continue installing fresh copy of Windows XP without repairing, press ESC.

From repairing your operating system, it will not removed all your files and other software installed in your computer including your hardware drivers installed. Just fixing the operating system.

For reinstalling the operating system, you need to back up all you files because it will wipe out all you datas in your computer.

8. After that, it ask you where partition you want to install the operating system. The message will display like this :

C : Partition1 [NTFS]
D : Partition2 [NTFS]
Unpartitioned Space

Use the directional key to navigate and choose C: Partition1 if you want reinstalling Windows XP and press enter.

If you want clean copy of Windows XP, you need to delete both partition by pressing L and install clean copy at Unpartitioned space. By these procedure, you will have C: drive only. D: Drive is delete.

9. After choosing the desire partition. this will appear :

* Format the partition using NTFS files system
* Format the partition using the NFTS file

I suggest to choose the first line which is the quick format. The 2nd line take too much time to install the operating system. Press to initiate the installation and it will be finish and reboot automatically. PART OF WINDOWS INSTALLATION IS FINISHED.

If you had interrupted installation which is asking for certain driver file, your CD installer maybe damage which cause files to be unreadable. Try to replace the new Windows XP installer CD to proceed and until finished installing OS.

10. Once it reboots, this time do not boot from CD or do not press any key to go to PART2 OF WINDOWS XP INSTALLATION PROCESS.

11. On the opening, regional and laguage option will appear, jus click next.

12. The it will ask to type your name & organization. Put you name and company if any and click next

13. Then, it will ask for CD key and type the 25 character CD key and click next

14. Then it will ask for computer name. You can change or leave it and click next.

15. Then, set your date and time zone and click next.

16. Then, it will ask you for workgroup and computer domain, just leave it and click next.

17. Now wait until the installation process end and it will again restart automatically.

18. Again, do not boot from CD and display setting will appear. Just click OK.

19. welcom to Microsoft Windows screen will appear. Just click next.

20. Helps protect your PC will appear and choose Turn on Automatic Updates ( Only if you install genuine Windows XP). Otherwise, I suggest to choose "Not right not" if you are installing copy only of Windows XP.

21. Who will use this computer message will appear. Just type your name on the first box and click next.

Also for your reference, here is the video for your convenient .



A thank you message will appear, Just click next and it is finished.

I hope it helps you and thank you for using FixYa !


For repairing the operating system here is the blog as other want it.








As per others demand, here is the video for Windows 7 and Windows Vista Operating system





on Dec 23, 2010 | Computers & Internet

Tip

How to Configure a Wireless Printer Wireless printers typically come with a...


How to Configure a Wireless Printer

Wireless printers typically come with a transmitter that a laptop, with a wireless adapter, can connect to and print from any location in a home. In order to configure a wireless printer you will need to install the drivers and software from the installation CD that came with the printer. You will be able to run the configuration for the printer driver, for the laptop, at the end of the software installation.

  1. Insert the installation disc for your wireless printer into the drive on your laptop computer.
  2. Wait for the Installation Wizard to appear.
  3. Click the "Next" button to continue and go through each screen to install the software for the printer.
  4. Select the option to "Configure printer driver now" on the last screen of the Installation Wizard.
  5. Click the "OK" button when the Information dialog box appears.
  6. Select the printer port for your printer when the Printer Port Setup dialog box appears.
  7. Click the "OK" button when the "addport" dialog box appears.
  8. Click the "Next" button to continue.
  9. Select your wireless printer from the list of installed printers when the Add Printer Wizard window appears.
  10. Click the "Next" button to continue.
  11. Click the "Connect" button when the Configure Printer Port dialog box appears.
  12. Wait for a connection to be made with the wireless printer and then click the "Finish" button to exit the Add Printer Wizard dialog box.
  13. Repeat this process on each computer that you want to connect to the wireless printer.

on Apr 02, 2010 | Computers & Internet

1 Answer

Printer is not scan but some problem she has. Error in scannor Turn off scannor and follow instructions ni manual. Scannor drive will closed. Code : 61,213,0 I want to new setup Canon PIXMA MP160...


  1. Select 'Program' (for Windows 2000/Me/98), or 'All Programs' (for Windows XP) from the Start menu.

  2. Select the name of the printer model to remove and select 'Uninstall.'

    05sj00014_01_en.jpg

  3. When the MP Drivers Uninstaller window is displayed, click 'Perform.'

    05sj00014_02_en.jpg

  4. When the confirmation window is displayed, click 'Yes.'

  5. When the Uninstallation Complete window is displayed, click 'Complete.'

    05sj00014_03_en.jpg

  6. Reinstall the drivers.

Reinstall the Drivers
Note:
  • The MP drivers can be installed using Easy Install or Custom Install.
    Easy Install automatically installs the software which is in the CD-ROM.
    This method is recommended for first-time users.
    Custom Install allows you to select the software programs from MP Drivers, Application Software, and On-screen Manual.
  • Login as a user with Administrator privileges to install on WindowsXP/2000.
  • Close any antivirus software that may be running prior to installing the drivers.
  1. Turn off the printer and disconnect the cable connecting the computer and the printer.

  2. Insert CD-ROM in the computer. (The CD-ROM will start automatically and the following window will be displayed on the screen.)
    1. If setup does not start automatically, click 'Start' and then 'Run'.
    2. At the Run window, type x:\msetup4.exe (where x is your computer's CD drive) in Open box and then click 'OK'.

  3. At the main installation window, click 'Easy Install' or 'Custom Install'.

    05sj00016_01_en.jpg

    When selecting Easy Install:

    (A) Click 'Easy Install'.

    (B) Click 'Install' in the following window.

    05sj00016_02_en.jpg

    * Display varies according to the printer model.


    When selecting Custom Install:

    (A) Click 'Custom Install'.

    (B) When the following window is displayed, click 'MP Drivers' and the application software to be installed, and then click 'Next'.

    05sj00016_03_en.jpg

    * Display varies according to the printer model.

  4. When the License Agreement window is displayed, read the content carefully and click 'Yes'.

  5. The installation will start.
    Messages may be displayed during the installation of the application software.
    Follow the instructions on the window and continue the installation.

  6. When the Printer Connection window appears, connect the printer to the computer and power on the printer.

    Note: If the installation cannot proceed even after 2 minutes, stop the installation by following the procedures below and start from the beginning again.

    1) Click 'Cancel' at the Printer Connection window then click 'Start Over' at the Installation Failure window.

    2) At the window to install the driver / applications appears, click 'Back' then click 'Exit'.

    3) Restart the computer.

    4) Install the printer driver again.

  7. For Windows XP, at the Welcome to the Found New Hardware Wizard dialog box, confirm Install the software automatically (Recommended) is selected, then click 'Next'.

    Note: The Welcome to the Found New Hardware Wizard dialog box may be behind the Printer Connection window.
    In this case, click 'Found New Hardware Wizard' button on the task bar to display the window.

  8. After the files are copied automatically and the dialog box Completing Found New Hardware Wizard window appears, click 'Finish'.

  9. If the Welcome to the Found New Hardware Wizard dialog box appears again, click 'Finish' again.

  10. At the Print Head Alignment window, click 'Execute'.

    Note:
    * The Execute button may not appear for all models. In that case, skip to step 13.
    * The Print Head Alignment can also be done after the installation of the printer driver.


  11. When the Start Print Head Alignment window appears, load one sheet of A4 or letter size plain paper in the sheet feeder and click 'Print Head Alignment'.

  12. At the Do not start another operation until current one has finished dialog box, click 'OK'.

  13. When the pattern is printed, click 'Next' at the Print Head Alignment dialog box.

  14. At the Installation Results dialog box, check the content then click 'Next'.

  15. At the Installation completed successfully dialog box, click 'Exit'.

    Note: When the Restart button appears, confirm that Restart the system now (recommended) is checked then click 'Restart'.

Dec 04, 2010 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

HOW TO INSTALL CANON MF 4100 PRINER DRIVER


hi
just follow the step

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} · step 1 Place the computer and printer next to each other and make sure that all the wires are connected to both the printer and the computer.
· Step 2 Turn the computer on and wait for it to boot up.
· Step 3 Plug the printer into the wall and then take the USB cord that is attached to the printer and plug it into the appropriate port on the computer.
· Step 4 Turn the printer on.
· Step 5 Click on "Start menu" and go to the "Control panel".
· Step 6 Find "Printers and hardware clip_image001.gif" box and click on it.
· Step 7 Take mouse and click "Add printer".
· Step 8 When you see "Welcome to the add printer wizard," hit "Next."
· Step 9 Click "Automatically detect and install plug and play printer" on the add printer wizard page. Click "Next."
· Step 10 Installing the printer will begin if the network can automatically detect it. Otherwise, the message unable to detect will pop up and you will be prompted to install the printer manually. Click "Next."
· Step 11 Select printer port. Use the recommended port for best set up options. Click "Next."
· Step 12 Pick manufacturer and printer. Click "Next."
· Step 13 Type a name or confirm name if it appears in the box and set printer as default printer if wish. Click "Next."
· Step 14 Print a test page to be sure printer is set up and online. Click "Next."
· Step 15 Receive a successful completion of installation of printer message. Click "Finish."

Aug 05, 2010 | Computers & Internet

3 Answers

How can I install HP Officejet 6310 All in one printer without an installation disk?


you cant install printer device without the driver disk. you can connct the printer to your computer but your computer wont recognize the printer. please click this link for your printer driver.

Apr 04, 2010 | HP OfficeJet 6310 All-in-One Printer...

3 Answers

Lost disk and need to reinstall printer. How do I install my printer without a disk?


Download a driver from manufacturers website or go to the place where you bought it and enquire about a duplicate disc .
OR
Go to your computer website...example if u r using HP go to http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=445441&lc=en&cc=us&dlc=en&submit.y=0&submit.x=0&lang=en&cc=us
& select your OS and do what they are telling
OR Go through the instructions given below
Instructions
Step 1:Place the computer and printer next to each other and make sure that all the wires are connected to both the printer and the computer.
Step 2:Turn the computer on and wait for it to boot up.
Step 3:Plug the printer into the wall and then take the USB cord that is attached to the printer and plug it into the appropriate port on the computer.
Step 4:Turn the printer on.
Step 5:Click on "Start menu" and go to the "Control panel".
Step 6:Find "Printers and hardware" box and click on it.
Step 7:Take mouse and click "Add printer".
Step 8:When you see "Welcome to the add printer wizard," hit "Next."
Step 9:Click "Automatically detect and install plug and play printer" on the add printer wizard page. Click "Next."
Step 10:Installing the printer will begin if the network can automatically detect it. Otherwise, the message unable to detect will pop up and you will be prompted to install the printer manually. Click "Next."
Step 11:Select printer port. Use the recommended port for best set up options. Click "Next."
Step 12:Pick manufacturer and printer. Click "Next."
Step 13:Type a name or confirm name if it appears in the box and set printer as default printer if wish. Click "Next."
Step 14:Print a test page to be sure printer is set up and online. Click "Next."
Step 15:Receive a successful completion of installation of printer message. Click "Finish."

I think this will heip

Feb 03, 2010 | HP OfficeJet 6310 All-in-One Printer...

1 Answer

Software for CX3200


The links on the page expire every 20 mins. here is what you need to do

Please follow the steps below to download and install your scanner in XP:
1. Go to the website http://support.epson.com
2. Under the ALL IN ONE heading select and then your scanner model.
3. Under the Drivers & Downloads section select Windows. Download the most current version of the Scanner Driver for your Windows operating system to your DESKTOP.
Reinstall
4. Complete the same steps for the printer model.

Scanner install

Make sure your USB is disconnected

1) Double Click on the Epson1****.exe file that you downloaded to your DESKTOP.
2) Click OK, Unzip, and then OK again.
3) The installer will copy the files to the system. Click on FINISH when prompted.
5) If a message appears indicating THE SCANNER HAS NOT PASSED WINDOWS LOGO TESTING, click CONTINUE ANYWAY. Then click FINISH.

Automated USB Driver Install
1) Before beginning, ensure the cable for the printer is disconnected and the printer is turned off.
2) Locate and double click on the downloaded driver installation file.
3) Click on OK at the first WinZip screen.
4) Click on UNZIP at the second WinZip screen.
5) Click on OK when WinZip is finished extracting files.
6) At the PRINTER UTILITY SETUP screen, click on OK.
7) The installer will now copy files to the computer. When this step is complete, it will tell you to attach the cable and power on the printer. Please connect the USB cable and turn on the printer.
8) The computer will install the new hardware.
9) Click on OK when the driver installation is completed.

Aug 11, 2008 | Epson Stylus CX3200 All-In-One InkJet...

1 Answer

Hp 3380 scanner issue


I SUGGEST DELEATING SCANNER FROM YOUR SYSTEM AND RELOADING THE SCANNER DRIVER FROM THE INSTALL DISC THAT CAME WITH YOUR SCANNER

Feb 02, 2008 | HP LaserJet 3380 All-In-One Printer

2 Answers

Laxmart x73


Insert your Lexmark Xx3 Installation CD (disc 1) in your CD-ROM drive. Make sure your computer is on. Once you see the Lexmark Installation screen, click the Install Now button. Wait while files are loaded onto your computer. Click the Next button. Click the Next on the directory window. Click Next on the following screen. If your USB cable is connected to your Lexmark All-In-One product, disconnect it now. Click OK. Wait while the software is installed on your computer. When the next screen appears, connect the USB cable and click OK. The printer should now be installed and ready to use. Already installed the software but it appears the printer driver is not installed To verify the printer driver is not installed follow these steps: Attach the USB and power cable attached to your device Restart your PC Click Start. Click Control Panel. Click Printers and other Hardware if the icon exists. Click Printers and Faxes If your printer does not appear in the list then please follow the remaining instructions below. Unplug the USB cable and power cord from the back of the printer Insert the Lexmark Xx3 CD into your CDROM drive if it is not installed already. If the CD automatically runs, click Cancel. Click Start and select Run. In the Open box, type the letter of your CDROM drive followed by prtsetup.exe. For example: D:\prtsetup.exe and click OK. A Lexmark License Agreement will appear, click Accept. A progress bar with the percentage of files copied will be displayed. Next a communication error will appear, click Cancel on this message. A printer registration screen will appear, click cancel or exit. Click Start and choose Shut Down. In the Shut Down window select Restart. While the computer is restarting reconnect the USB and power cables and power the printer on. Once the computer has restarted Windows should detect the printer. if still it is not working try with another usb cable

Sep 12, 2007 | Lexmark X7170 All-In-One Scan/Copy/Fax and...

Not finding what you are looking for?
HP Photosmart 2575 All-In-One InkJet Printer Logo

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...