Question about One For All URC-3021 Remote Control

1 Answer

Codes and instructions

I need the codes and instructins for a durband tv

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 129 Answers
Re: codes and instructions

Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks

Posted on Dec 24, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Setting up a Living solutions universal remote a17g0891 to a panasonic tv.....i need instructions and tv codes

turn on tv manually press and hold TV bitton until red led lite comes on enter 3 digit code for your device the lite will shut off , pree the on/off button to see if remote accepted the code. Panasonic tv codes are 003, 011,023,032,033,034,072,086,087,108,110113,126,127,128 & 140. I saved the Remote instructions on my laptop..... aka the cake lady have a great day !

Sep 19, 2011 | Big Button TV Universal Remote

1 Answer

Need code for shrp tv

I can help you with your URC-3021 Universal Remote Control issues.

The codes for Sharp TV's 0093.

For complete instructions on entering the URC-3021 remote codes, please refer to my posted Fixya Tip One For All URC-3021 Code Entry.

Find instructions here for the One For All URC-3021 Code Search.

I hope that helps.
Reassign URC-3021 Device Key
Urc-3021 Code List Download
One For All URC-3021 Code Search

Jun 02, 2010 | One For All URC-3021 Remote Control

1 Answer

How do i setup my remote for my tv . tv is GE & remote is px-rc1

when you buy a remote they give you some instructins and a list whit codes, follow these instructions or try on this site to ask ather instruction:

Feb 14, 2010 | Universal Remote Control MX-500 LCD Remote...

1 Answer

Need code for GE tv need code to turn on ge tv with oneforall remote

I found that these websites should have all the codes and instructions for most remotes
they are easy to follow instructions

Jul 09, 2009 | Remote Controls

2 Answers

Hi, I have an one for all remote, but can't find the instruction manuel and codes

The link below shows the full Instructin Manual for for your One for All (Model: URC 7740). You will find all you need to set it up with all the devices you like. It's in PDF format document. You can download it, Print it, or Bookmark it FOR FUTURE REFERENCE.

May 27, 2009 | One For All URC 7740 Remote Control

3 Answers

I am looking for code and instructions for rca tv

RCA 000,001,005,072,073,074,076,077,078,135,138,140,156,162,163,169,171,178,229,246,249,260,274,275,293,302

Dec 17, 2008 | RCA 3-Device Universal Remote

5 Answers

Finding codes

how program my control sanyo for tv curtis mathes

Sep 12, 2008 | RCA DIRECTV Satellite Remote Control

1 Answer

Won't Work

I also have a Jumbo remote (the one with the coloured buttons on) and what a load of rubbish it is. The instructions are quite simply wrong!!! To pre-load a code press the device button you want (E.G. TV) and then press and hold the SET key until it is constantly RED. Then enter the 4 digit code you want and then press the OK key (despite what the instructions say this is the way to program the code).

To perform a SEARCH forget the instructins and follow these.. first press the device key you want (E.G. TV) and then press and hold the SET key until it is constantly RED. Then press the POWER OFF key and sit back and the remote will cycle through the various (and limited) codes it has, each time a code is tried out the RED LED light will blink a couple of times.
WHEN AND IF your device turns off (presuming it was switched on) then press the OK key to store the code.

To find out what code a device has stored against it press the device key you want and with it pressed down press the 1 key to find out the first digit, the 2 key to find out the 2nd digit etc.

In summary, the jumbo is a good gag, but is not practical, not useful, not easy to use, not supported and in general quite rubbish.

Dec 26, 2007 | Remote Controls

2 Answers

Need code or instructions


Dec 03, 2007 | One For All URC4220 Remote Control

4 Answers


I have an sony T.V. and polaroid. My problem is that I have no code no. for the T.V. and no instroction for the remote. Please help

Nov 28, 2007 | Jensen SC-570 Remote Control

Not finding what you are looking for?
One For All URC-3021 Remote Control Logo

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Remote Controls Experts

The Knight
The Knight

Level 3 Expert

66552 Answers

Cindy Wells

Level 3 Expert

4722 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an One For All Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides