Question about HP LaserJet 4700 Printer

3 Answers

How do i reset the transfer kit for HP LJ 4700

How do i reset the transfer kit for HP LJ 4700

Posted by on

  • Mordy B Feb 09, 2013

    Please Contact me at fixyaprinter@gmail.com and I'll send you the reset solution.

  • Mordy B Feb 11, 2013

    I have a gig for it:http://fiverr.com/fixyaprinter/tell-you-...

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 81 Answers

With the power on, press the down arrow button until the display reads " Configure Device" menu. Press the Select button and using the down arrow button, scroll through this menu until the display reads "Resets" and press the Select Button. Then press the down arrow button again until the screen reads "Reset Supplies" and press Select button. Once you get to this menu this is where you can reset the fuser and the Transfer belt count

Posted on Oct 13, 2009

  • 1 more comment 
  • marko_kaljul
    marko_kaljul Aug 24, 2012

    Well, fos starters, it is impossible for one to reset the clj 4700 fuser from the menu . There is actually an electrical cirquitry that resets the fuser and burns out two fuses . To reset the fuser you have to change two resistors, one 22R and the other 20R, both 1/4w .

  • Asif Shaikh
    Asif Shaikh Nov 20, 2012

    can u tell me ??

  • Asif Shaikh
    Asif Shaikh Nov 20, 2012

    where is resistors located????

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How to replace transfer kit 4700

Posted on Apr 19, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Please Contact me at fixyaprinter@gmail.com and I'll send you the reset solution.

Posted on Feb 09, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Service error 4cf0 hp 4700


Try removing the JetDirect card, then see if the machine will boot and print a test page. If it works without JetDirect, then try replacing the JetDirect card.

Oct 15, 2014 | HP LaserJet 4700 Printer

1 Answer

How do I replace my HP Color LaserJet 4700 Image Transfer Kit? I don't have the manual for it.


Replace the ETB when a REPLACE TRANSFER KIT message displays on the control panel.
1. Turn the printer off.
2. Open the top and front cover.
3. Lower the ETB by pulling the green handle at the top of the unit downward.
4. Press the small blue latches located on either side of the bottom of the ETB and lift the unit out
of the printer.
5. Install the new ETB.
6. Close the front and top covers.

Apr 11, 2011 | HP LaserJet 4700 Printer

1 Answer

How do you install a transfer kit to 4700 dtn printer?


Replacing the ETB (transfer Kit)
Replace the ETB when a REPLACE TRANSFER KIT message displays on the control panel.
1. Turn the printer off.
2. Open the top and front cover.
3. Lower the ETB by pulling the green handle at the top of the unit downward.
4. Press the small blue latches located on either side of the bottom of the ETB and lift the unit out
of the printer.
5. Install the new ETB.
6. Close the front and top covers.

Jan 13, 2011 | HP LaserJet 4700 Printer

1 Answer

My 4700dn is giving me the replace transfer kit message. I have swapped out known good transfer kits and the printer prints fine but I still get the replace transfer kit message. What can I try next?


The message only clears when you install a new transfer unit, one that hasn't been used before. If you want to clear the message, you'll have to install a brand new transfer belt.
If you know the service PIN for the 4700, you can probably go into the service menu and clear the message, but otherwise a new transfer unit is the only way to go.

Aug 11, 2010 | HP LaserJet 4700 Printer

1 Answer

How an hp 4700 transfer kit looks like in real life ie the pict


Hi, you can see a pretty good drawing of the transfer belt and how to replace it in the ETB Install Guide:

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&contentType=SupportManual&docIndexId=64255&prodTypeId=18972&prodSeriesId=473038&lang=en&cc=us

Scroll down to "Setup and install - general" and click on the link for "HP Color LaserJet ETB - Install Guide (multiple language)."

Jul 30, 2010 | HP 4700N Color Q7492AABA Laser Printer

1 Answer

My 4700 hp printer is double printing and giving a replace transfer kit notice


This means you'll have to replace the transfer kit because it is "end of live". This also causes the printing problems. The transfer unit is the big black unit you'll find when you open the front cover.

Jul 29, 2010 | HP LaserJet 4700 Printer

1 Answer

I have hp printer 4700 color laserjet .i installed new image transfer kit but counter not reset automaticaly .plz help me how i can reset manually . thanks


What I recommend you to do is turn off the printer, disconnect it from main power for a couple of minutes and then connect back and then turn on and counter suppose to reset by itself.

Feb 27, 2010 | HP Color LaserJet 2600n Printer

1 Answer

Hp lj 4700 with error 41.3 unexpected paper size


Hi,

Take the paper off and place the correct paper size.
If the setting is in A4 paper size please place the A4 size paper.

Thanks

Thiru

Jun 17, 2009 | Office Equipment & Supplies

1 Answer

50 .2 Fuser Error in HP Laserjet 4100N


Hi,
you need an maintenance kit 4100

ACC C8057A 4100-mk-c4110a-mini.jpg Maintenance Kit, Fuser, 110V, LJ 4100 LJ 4100 Series ACC C8057-67901 4100-mk-c4110a-mini.jpg Maintenance Kit, Fuser, 110V, LJ 4100 LJ 4100 Series ACC C8058A 4100-mk-c4110a-mini.jpg Maintenance Kit, Fuser, 220V, LJ 4100 LJ 4100 Series
Selected Item RG5-5069-000 See RG5-5069-090 Not Available 0
Alternate Item(s) RG5-5069-090 Fuser Film ***'y, 220V, LJ 4100 180.50 2 http://www2.printerworks.com/cgi-win/tpwall.exe/find?RG5-5069-000

HP LJ 4100 Fuserkit RG5-5069 HP

Dec 11, 2008 | HP LaserJet 4100n Printer

Not finding what you are looking for?
HP LaserJet 4700 Printer Logo

10,817 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...