Question about Kenwood KDC-MP205 CD Player

2 Answers

Kenwood KDC-MP205 I cannot switch off the demo mode although I follow the instructions it doesn't work...and yes I started in standby mode. What is menu mode and how to get there? Thanks

Posted by on

  • Mstr_C Dec 24, 2007

    The instructions suck! First thing is to press the MENU button

    at the top left of the face plate then the SRC button as outlined

    in the instructions. This little player really does work well.

    Good Luck.



    KC

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

1. Be in Standby mode
2. press Menu
3. Use joystick to up/down through the menu
4. when it shows display mode on, press the joystick in to change it... you might have to hold it in or tap it twice. Mine's touchy, sometimes I have to push it in twice on the menus.

Posted on Dec 28, 2007

Ad

Yeah i hit SRC button until it was on standby then i had to hold the menu button until the new menu came up it had dim beep DEMO and some other stuff all the other ones i could change but on DEMO i would move the joy stick thing both directions and it wouldnt change it kept saying ON.. WHAT DO I HAVE TO DO TO GET THE **** OFF MY SCREEN!

Posted on May 05, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenwood KDC-MP635 STUCK IN DEMO MODE


Turn the unit onto standby then press and hold the menu button then scroll down to demo using the toggle switch on the right then press and hold the toggle switch for a few seconds and it will change to demo off. It's not too difficult but you are correct, it doesn't tell you correctly in the installation instructions.

Jan 25, 2008 | Kenwood KDC-MP635 CD Player

3 Answers

KDC-X591 Demo Mode & Remote Steering Harness


instructions i was trying to figure out the same thing in my brothers car and i came to this site the two answers before mine were both right and wrong, they needed to be combined and modified a tic. but i just got my brothers kdc x591 and this is how hit source button till standby mode is on, press menu then use the control knob the right one thats not the volume, to select demo mode press the 1 button then menu and voila

Dec 31, 2007 | Kenwood KDC-X591 CD Player

4 Answers

In car CD-Receiver


press select for 5 secs then turn the volume left or right to switch it on or off

Nov 02, 2007 | Car Audio & Video

1 Answer

How to turn off this blasted DEMO mode on MP235


Once in standby you have to press and hold the button to get into the menu. Once in the menu, you use the joystick control on the right to navigate to "Demo" and toggle it to "off" (can't remember off the top of my head... you either have to press the joystick in and hold it to toggle or just move it up/down...). Once done, just press Source to exit.

Sep 10, 2007 | Kenwood KDC-MP235 CD Player

5 Answers

Unable to turn off DEMO MODE


1. Turn Radio On
2. Change Source input to Stand-By
( Puts radio in display only Stand By mode.)
3. Press Menu Button
( Gives you standby menu)
4. Toggle display with control knob until DEMO ON appears
5. Hold control knob in until DEM0 OFF appears
6. Press Menu Button
7. Change source back to music.
All done. same as other Fixes - Just step by step!

Sep 09, 2007 | Kenwood KDC-MP435U CD Player

3 Answers

Demo Mode will not switch


I had this same problem, you have to be in menu mode to turn off DEMO mode.

Sep 01, 2007 | Kenwood KDC-MP205 CD Player

3 Answers

Demonstration mode won't stop!


Did you start from the "Standby" mode?

Aug 07, 2007 | Kenwood KDC-MP205 CD Player

1 Answer

Cant turn off the demo mode


There is often confusion in the way the manual states how to achieve removing demo mode. Because this is listed in the "Menu System" section of the manual and assumes you read from page 1 of the manual that you will know to enter the menu in this section of the manual. Here is step by step instructions on removing demo mode on your unit. 1. Go to standby mode 2. Press and hold the menu button till the menu comes up 3. Press control knob towards AM or FM to scroll through menu till you locate "Demo On" 4. Press control knob straight in for approximately 3 seconds till it switches to "Demo Off" 5. Hit menu button again to exit menu

Apr 05, 2007 | Kenwood KDC-MP732 CD Player

1 Answer

Kenwood demo prob...still


There is often confusion in the way the manual states how to achieve removing demo mode. Because this is listed in the "Menu System" section of the manual and assumes you read from page 1 of the manual that you will know to enter the menu in this section of the manual. Here is step by step instructions on removing demo mode on your unit. 1. Go to standby mode 2. Press and hold the menu button till the menu comes up 3. Press control knob towards AM or FM to scroll through menu till you locate "Demo On" 4. Press control knob straight in for approximately 3 seconds till it switches to "Demo Off" 5. Hit menu button again to exit menu

Feb 18, 2007 | Kenwood KDC-MP232 CD Player

1 Answer

DEMO MODE


Enter Standby Mode by pressing SRC button Press and hold the Menu button down until MENU flashes. The word Menu will be replaced with a menu option immediately afterward. Then, use the control knob to move through the menu options by moving it up (toward FM) or down (toward AM). Move through the options until you find the Demo ON option. Press down on the control knob until it changes from DEMO ON to DEMO OFF. Then press the SRC button again to get out of Standby mode.

Dec 02, 2006 | Kenwood KDC-MP4032 CD Player

Not finding what you are looking for?
Kenwood KDC-MP205 CD Player Logo

Related Topics:

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5003 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

83096 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...