Question about Frigidaire Dishwashers

2 Answers

We have apartment size dishwasher which quit before finishing cycle and will not come back on.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 41 Answers

There are design problems with certain model dishwashers where the wire gauge on wire harness is too small and will heat up causing the thermal fuse to blow prematurely. The replacement kit includes a wire harness with a thicker gauge wire, preventing the fuse from blowing prematurely. There were no reports of fire hazard.

Posted on Nov 03, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 137 Answers

It could be any number things that have gone wrong, anything from blown fuses, blown thermal cut-outs, sticky valves....etc.etc. you really need to call in a repair guy to check it.

Have you checked the outlet that the dishwasher is connected to... it may be a bad outlet. (that happens all too often)

Posted on Oct 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dishwasher wont finish any cycles


That blinking light is trying to tell you that there is something wrong with the dishwasher. You need to fix the problem or else that blinking light will come back. And the number of times it blinks (before it pauses and repeats) will tell you (or a technician) what is wrong. How many times does it blink?

Jul 04, 2014 | Kenmore Dishwashers

1 Answer

Wont finish wash and drain


I would turn off main power then open the controls looking for any burn parts on the power board before calling any one , how ld is this unit before yu spen too much get back to me

Dec 04, 2011 | Electrolux Dishwashers

1 Answer

Won't finish cycle


Call Bosch's Dishwasher Helpline to see if yours is a recalled unit. There is a problem with the control boards on many of these. I have the number in my guide for drainage problems. It is HERE.

Jun 30, 2009 | Bosch 24 in. SHU43 Built-in Dishwasher

1 Answer

JDB2100AWS - Leaving a gritty residue in the tub


May need to look into a dishwasher cleaner. I perfer Glisten but there are many more out there.

Jun 08, 2009 | Jenn-Air 24 in. JDB2100AW Dishwasher

1 Answer

Dishwasher won't cycle


Sounds like you need a new timer. Costs about $50 - $60. I had the same problem. The knob now turns. Hope this helps.

May 18, 2009 | GE Nautilus 24" Built-in Dishwasher

1 Answer

Kitchen Aid Superba Wisper Quite will not start cycle


Intermittent door switch, should be available, easy to change out and inexpensive.

Aug 04, 2008 | Dishwashers

1 Answer

Not cleaning properly


It sounds like the dishwasher is not completely draining... this leaves particulates floating in the water and is redispersed during the next cycle.

If it were me, I'd consider taking apart the bottom rotating sprayer and the plastics that cover the draining impeller (or pump). My guess is that contains a large amount of debris which should be cleaned out. If that isn't the case, check the pump itself. Something might be in there preventing it from working, or may have damaged it in a previous cycle (ie: chicken bone). Any screens or traps should be completely clean. If you use powdered detergent, there might be a buildup of solidified detergent preventing things from working properly and will need to be cleaned. If you use powdered detergent, consider switching to liquid as it tends not to solidify.

Let me know how it goes. Please rate accordingly.

May 08, 2008 | Tecnik 24 in. TKD795/3 Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Mike

Level 3 Expert

4340 Answers

Garth Jackson

Level 2 Expert

93 Answers

Brad Brown

Level 3 Expert

15729 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...