can someone help me in letting me know if they know the code for the ILO tv that can be inputted into the Bresnan Cable remotes? also i have been looking for the code for the Insignia television also. any suggestions are welcome.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hey there, Cheri Torres with DISH Network Internet Response Team here. I came across your post and wanted to see if I could help. The channel that you would need to put your TV on would depend on the type of cable you have plugged into your TV and receiver. If the cable you have plugged into the receiver and TV is a coax cable (black cable with silver end) the channel would need to be on 3 or 4. If the cable is a RCA cable (black with red, white and yellow tips) the channel would need to be on an input such as Video 1, input 1, input 2, aux etc. The other cable that it could possible be hooked up with is a HDMI cable (black with a thin flat end) the TV would need to be on a HDMI input. You can find the inputs by pressing the input, TV/video, source or AUX button on the DISH remote or TV remote. I hope this information is useful and if you have any other questions please let me know.
Following the instructions on hooking up the cables gave me fits. I finally just put the instructions away and winged it. Got it that way. Bypass your Ilo tuner. Hook the Comcast Cable (outs) up to the A/V input 1 of your ILO. Hook your tv combo A/V outputs, to the ILO A/V inputs. Select the Source and choose the cable source for cable and the combo source to tape from your VHS/dvd combo. Its a pain but you have to select Source everytime you turn the Ilo back on. You could hook your Cable to the ILO but would have to turn on ILO everytime to watch tv. Two remotes is a chore but you have to use tv remote for the volume anyway so it doesn't matter. Hope this helps.
Just run your outputs from your cable to the ILO inputs, then your ilo ouputs to the tv inputs. Use Cable remote to control channels, use ILO source button on remote to access the correct input setting on ILO. AND YES< you have to do this EVERY TIME you turn the ILO on to watch tv.. I have mine hooked up this way to record from my convertor box and My husband hates it.(when he just wants to watch tv.)
I had the same problem trying to program my satellite remote to work with the ILO tv. I found that the emerson codes DO work. Yes local cable remotes will work as long as you have the code and the brand is getting more popular. The code that worked with both cable companys, Charter and DirecTv was 10171 I believe. You can find it under the Emerson codes. Hope this was helpful.