Question about HP Office Equipment & Supplies

1 Answer

After putting new ink cartdrides in the printer keeps saying error, replace cartdriges.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Make sure that you remover protective film from any cartriges you replaced. reinstall and depending on the printer you may have to go into the menu to start the clean cycle. others you may just have to hold the power button down for a few seconds until it starts up.

Posted on Oct 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dcp j125 wont recognize the ink cartdrige


Yes, it can be VERY frustrating. I would start with cleaning off contacts on the cartridge and on the printer where the cartridge plugs in. ... If it is a refurbished cartridge (or refilled) it's sensor internally could just be worn out. If you have tried multiple cartridges that are new or known good, it is possible your printer has a hardware problem too. ... If you know someone else with the same model of printer, try the cart's in the other printer to see if they are sensed good.

Apr 09, 2012 | Office Equipment & Supplies

1 Answer

Error message "no ink cartdrige"


reseat the ink cartdrige
ink cartdrige is bad or malfunction, replace the ink cartdrige

May 14, 2011 | Office Equipment & Supplies

2 Answers

Canon Pixma mp160 cartridge slams to right side e5 error


you need to replace the cartridge,with a new one original canon,not refill

Mar 03, 2011 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Ink Problems. is only printing with yellow ink


You may need to replace the Print Head or Purge Unit.

May 29, 2010 | Canon Pixma MP500 All-In-One InkJet...

2 Answers

My black ink ran out so I replaced the ink


Hi:
I have used the printer series that you have for years, and once in awhile, I get a new cartridge that won't immediately print. Often, there is just a bit of dried ink residue on the print head, and that won't allow the cartridge to work correctly.

Some simple things to try are :

1) Remove the black cartridge. and take a damp paper towel and gently swab the print head area. Next, apply some pressure to the sides of the black cartridge, until you see black ink oozing out of the print head. Repeat if needed. Once the ink starts flowing, blot off the excess, and install the cartridge.

If you can't get ink to flow, then the cartridge might be bad. Most of them have an expiration date on the packaging.

Mar 31, 2010 | HP DeskJet 960c InkJet Printer

3 Answers

My printer is not printing..page comes out blank. inside, all the lights are flashing on the ink cartridges...any ideas what's wrong? thanks


this message means that the cartdriges are empty...
if you have bought new cardridges and lights still flash then the printer just dont recognize them right.
possible cause 1:
dirty cartdrige (or printhead) chip contacts > clean them with alcohol and cotton (switch printer off first).
see the chips in this photo:
https://secure.datatekusa.com/images/canon%20PGI5.CLI8%20refillable%20cartridge.jpg

possible cause 2:
bad printer controller: the chip in the printer that communicates with the cartdriges is gone mad... take the printer to service...

all the above are valid assuming you bought original cartdriges if not then do so...

Sep 03, 2009 | Canon PIXMA iP4200 InkJet Photo Printer

2 Answers

HP Photosmart 3110 All in One says ink cartdriges missing


Follow the instructions in this link.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00409514&prodTypeId=18972&prodSeriesId=3380537

May 18, 2009 | HP OfficeJet J4580 All-In-One Laser...

2 Answers

My mp600 keeps saying close inner cover-which is closed


I had the same issue, turning off didn't solve it.
There's a plastic flap the width of the print tray just inside that I flipped up and it solved this problem. It is directly in front of the ink tanks. I'm assuming we flipped it down and forgot about it. It seems it needs to stay up, although you wouldn't notice it when it flips down when you close the top, as it closes just fine with it down. It's easy to overlook. This took me a few hours to realize.

The top of the flap has a half circle cut out of it in the middle.

Dec 18, 2008 | Canon PIXMA MP600 all-In-One InkJet...

2 Answers

Black Printer cartridge


It will tell you the colour is low, regardless of the format in which you are printing. I don't believe Canon provide a way for you to disable this for their printer range, so you'll need to put in the new colour cartridge to get rid of this error. (you should however, be able to print whilst receiving this message)

Jun 19, 2008 | Canon PIXMA iP1800 InkJet Photo Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...