I lost the cd to install my wireless router. I got a new computer with windows vista on it can you tell me where i can download the program please?

Uninstall the Epson Printer Software and then Reinstall it.You can Find the uninstaller in your Control panel ,once your in the control panel you will find the Icon labeled Programs and Features you will see a list of programs that are installed on computer.The programs will be listed alphabetically,find the Epson Printer,right click it and hit uninstall.After it finishes uninstalling,restart your computer,and after it reboots and your looking at your desktop,put the cd that came with your printer and follow the instructions during installation.Make sure you have a usb cable plugged in to your printer from your computer.Make sure you tell the installer that you want to use the printer as a network printer wirelessly.After its done installing you will want to restart your computer and after it reboots(restarts)then try to reestablish a connection with the printer so that you can print.Hope this helps and Good Luck.

There is no need for installation cd; just use your internet browser (Internet Explorer, Mozilla e.t.c.) in order to connect at the router's ip and make the proper settings. In case you don't know your router's ip, follow this guide:
Connect your computer with ethernet cable at the router and after the connection has been established, hit start - run - type cmd. At the new black window type ipconfig and hit enter. You will get the results for both ethernet and wireless connections (if a wireless one exixsts). The line for Default Gateway is the one containing your router's ip.

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct fixya link: http://www.fixya.com/users/technical114

NeoSmart Technologies offers a download called Vista Recovery Disk in .iso format. Download and mount the iso with your favorit burning program. Boot to the cd to access the recovery center. Hopefully you'll be able to repair your Windows Vista installation or restore to a known good configuration.
Good Luck

Most routers don't require discs and the disc usually contains mere documentation for configuration and help. Routers are usually plug-and-play type devices but if you're definitely wanting some type of program or information. You can visit the below link for your router.

http://www.dlink.com/products/support.asp?pid=474&sec=0#applications

You'll need to specify by clicking the "Click Here" based on the revision of your router (A, B, or D). Once you've selected a revision, you'll be able to download the application and firmware updates for your router.

One question, is... do you need to enter a KEY or is this an open network?
I have found that with a new computer, you need to do the following to connect.
If this is an open network, then leave your router running, and just do a cold boot with your computer.
IE: Shut down, count to 10, and then re-start.
You may also need to connect (by network cable) to your router and make sure the wireless is turned on.
Most new rountes start with the wireless disabled.

Here is a link to install guides and driver installations for your specific OS.
linky

http://www.hp.com/country/us/en/welcomeBC.html#Support
type in psc1315.

They have all the software, firmware and apps

When I try to download the CD, the whole CD does not download.

Why do you want to install the router ? Can you help me understand your setup , your ISP ?

- Ranjit
[email protected]

i need to install the router but i lost the cd how can i install it