Question about RCA Universal Remote Control

1 Answer

I found my codes now what do i press on the remote to enter them RCR312w

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

It think this can help you

  1. Turn on the component you want to program.
  2. Step 2 Press and release the component button on your remote that corresponds to the component you want the remote to operate (TV, VCR, etc.). The illuminated ON-OFF button will turn on and remain on.
  3. Step 3 Press both the component and the ON-OFF buttons. The illuminated ON-OFF button will turn off, and then will come back on.
  4. Step 4 Release both buttons after the ON-OFF button turns back on. The button should remain illuminated.
  5. Step 5 Press and release the PLAY button. If the component does not respond after five seconds, continue to press the PLAY button every five seconds until the component turns off.
  6. Step 6 Press and release the REVERSE button when the component turns off, then wait to see if the component turns on again.
  7. Step 7 Press and release the STOP button to save the new code.
If This Will Not Help

Talk TO Me Again

Thank You



Posted on Oct 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need instructions on how to set my RCR312W for a Samsung TV, just the TV


Hello
There are four digit and five digit codes that can be synchronised with Samsung TV to RCR312W.
Four digit codes are:
1004, 1005, 1006, 1012, 1013, 1015, 1017, 1019
Five digit codes are:
10812, 10054, 10060, 10702, 10178
Instructions:-

Direct Code Entry

To program your universal remote to control your components

using the Direct Code Entry Method, follow the steps below.

1. Manually turn on the component you want the remote to
control

2. Locate the enclosed Code Lists. Find the list for the

component you wish to program. Find your component's

brand. You will see a listing of four-digit codes for each
brand.

3. Press and hold the component key (TV,

VCR•DVD, SAT•CBL) you wish to

program. The illuminated ON•OFF key

turns on and remains on. If you release

the component key at any time during the Direct Code

Entry procedure, the illuminated ON•OFF key blinks four
times, and the process is exited

4. While holding down the component key, consult the

Code Lists for the four-digit code that corresponds to your

component's brand and use the number keys (0-9) on the

keypad to enter it. While you are pressing the numbers, the

illuminated ON•OFF key turns off.

5. After the fourth number is entered, the illuminated ON•OFF

key turns on. At this time, release the component key. If the

illuminated ON•OFF key turns off, you have entered a valid

code and have followed the correct procedure for Direct

Code Entry.

If you enter a code number that is not in the Code Lists or

you do not follow all of the steps for Direct Code Entry,

the illuminated ON•OFF key blinks four times when the

component key is released. This is an indication that a

programming error has occurred. In that case, repeat the
Direct Code Entry process from step 3.

Jun 01, 2011 | RCA RCR312W Remote Control

1 Answer

Need codes for rcr312w remote for my apex tv.


While looking for the codes for your remote I found that you can program your remote without actually knowing the code. It also says one of the problems with the instructions is that they don't tell you about the reverse button having to be repeatedly pressed every two seconds. The codes for Apex Digital TV's are: 10156,10748, 10879 and 10765. Hope this solves your problem.

Oct 06, 2010 | RCA Universal Remote Control

1 Answer

CODE FOR RCR312W FOR MY APEX TV


Turn on the TV, Press and hold down the TV button while entering one of the four digit codes, if the ON/OFF turns off on the last digit entered, that's the correct code, if not, repeat steps, using a different code until it does..here are the codes,..1137,1141,1235.....hope this was helpful...

May 28, 2010 | RCA DIRECTV Satellite Remote Control

2 Answers

Remote Code


1.Go to the url below
http://www.rcaaccessories.com/rcaaccessories/RcaaccessoriesProductDetail.do?ACTION_TYPE_ID=ACTION_TYPE_PRODUCT_DETAIL&ACTION_CATEGORY_IDSTR_CATEGORY_UNIVERSAL_REMOTES&ACTION_PRODUCT_ID=RCR312W

2. Scroll down and select the "Support and Manuals" tab.

3. Click "Code List for RCR312W

Jan 26, 2010 | RCA Universal Remote Control

1 Answer

RCA Remote (RCR312W) Code for Sharp TV (19R-M100)


I found that these websites should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
try repeating all the steps again
if this doesnt help try replacing the batteries and then repat all the steps

Jul 14, 2009 | RCA Televison & Video

2 Answers

RCA Remote (RCR312W) Code for Sharp Television (19R-M100)


I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
if this helps please give a fixya rating

Jul 14, 2009 | RCA 3-Device Universal Remote with...

1 Answer

I need code for zenith tv to program into rca remote #rcr312w


Hi cuddles3634!

For that remote, the tv codes are:

Zenith 1000, 1006, 1049, 1054, 1078, 1116, 1133, 1167, 1170, 1172, 1207, 1230

If the TV is digital: 1016
Hope that helps!

Jan 04, 2009 | RCA Universal Remote Control

9 Answers

I NEED PROGRAM CODES AND PROCEDURES FOR RCR312W


I can help. I too have an RCR312W remote and it did not work.
I found this code on bobvila.com message board. The code from the RCR311W remote works.


1) turn on unit

2) press and hold componet button on remote (TV, VCR, etc)
until On/Off lights up

3) press and hold On/Off while holding component button. Light will go out. Continue hoding both buttons until light comes back on.

4) release both buttons. On/Off should stay on.

5) Press On/Off repeatedly until unit turns off.

6) Press the Stop key at bottom.

7) light goes off. Remote is programmed!

Oct 17, 2008 | RCA Universal Remote Control

8 Answers

Can't find code for my RCR312W to work on my Toshiba TV. I tried all different codes. Any suggestions?


Have you tried these codes?
Code 1000 for Toshiba TV Code 1048 for Toshiba TV Code 1072 for Toshiba TV Code 1105 for Toshiba TV Code 1109 for Toshiba TV Code 1118 for Toshiba TV Code 1160 for Toshiba TV Code 1190 for Toshiba TV Code 1241 for Toshiba TV

Sep 10, 2008 | RCA Universal Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...