Question about Dell Inspiron 1525 Laptop

1 Answer

My dell inspiron is connected to our server at work but wont open a web page while others opens,i cecked the drivers and set ip but it is still the same

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,600 Answers

Windows WiFi Fix,
Windows Zero Wireless Configuration is one of the best programs to run a WiFi in Windows XP or Vista. Most of the other software packages that come with the different adapters have been poor at best in keeping a connection through Windows. Here is the best guide to get you back up and connected.
Windows XP:
Click Start
Right click on My Computer
When a window pops up click on properties
Click on the Hardware tab
Click Device Manager
Click the [+] next to Network Adapters
Find your wireless card and right click on it.
Click Disable
Windows may warn you that disabling the device may make it stop functioning.
Continue disabling the device.
Wait 30 seconds or so.
Right click on your wireless again and click Enable.
Exit the device manager.
Reconnect to your router.
You should now be able to connect to the internet.

Windows Vista:

Click Start Logo
Right Click Computer
Click Device Manager
Windows will ask you about opening Device Manager Click Continue
Click the [+] next to Network Adapters
Find your wireless card and right click on it.
Click Disable
Windows may warn you that disabling the device may make it stop functioning.
Continue disabling the device.
Wait 30 seconds or so.
Right click on your wireless again and click Enable.
Exit the device manager.
Reconnect to your router.
You should now be able to connect to the internet.

Posted on Oct 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Reset IP HP2015DN


Hi, not sure why this is coming under the router section. You'd need to post a little more information about the problem. Is it with the IP address settings on your router or those wirthin the printer itself. If its
the printer itself - the problem solution is available here possibly.

But Google Resetting the IP address on
HP2015DN
Details To open the HP Embedded Web Server, type the IP address or hostname of the printer in the address field of a supported Web browser. To find the IP address, print a Configuration page from the control panel of the printer by pressing and holding the Go button for 5 seconds. The HP Embedded Web Server URL can be bookmarked for quick access at a later date. Supported web browsers include the following:
  • Internet Explorer 6.0 (and later)
  • Netscape Navigator 7.0 (and later)
  • Firefox 1.0 (and later)
  • Mozilla 1.6 (and later)
  • Opera 7.0 (and later)
  • Safari 1.2 (and later)
  • Konqueror 3.2 (and later)

The HP Embedded Web Server has the following three tabs that contain settings and information about the printer:
  • Information tab
  • Settings tab
  • Networking tab
Once the HP Embedded Web Server opens, perform the following steps to configure a static IP address:
  1. Click the Networking tab.
  2. Click Network Settings under Configuration in the left menu bar.
  3. Click the TCP/IP tab.
  4. Use the drop-down menu to change the IP Configuration Method to Manual.
  5. Type the new IP Address in the box to change the IP Address .
  6. Change any other applicable networking information, if applicable.
  7. Scroll down the page and click Apply .
  8. Click OK on the confirmation screen and then close the browser window.
  9. Wait a few minutes and then print the Self Test/Configuration page and the HP Jetdirect Configuration page to verify that the IP Address has changed.

Dec 03, 2013 | Computers & Internet

1 Answer

I can't connect to the internet on my dell inspiron b120 either by wireless or, using an ethernet


so the pc is recognizing the hardware? go to support.dell.com, and type in your service tag and download the latest drivers for your hardware? if that doesn't help, press the windowsk and the R key and then type cmd and press enter. type 'ipconfig' no ' and press enter
post those results here. if you're connected to the internet but are unable to load web pages it's possible your browser is set up to use a proxy. open up IE or FF or chrome and go to the connections tab and make sure that the box that says 'use proxy for this connection' is unchecked.

Jun 28, 2012 | Dell Inspiron B120 Notebook

1 Answer

I have dell inspiron 1545 laptop. I am using tata photon datacard for internet connection at my home, which is working fine, but when i connect my laptop to Lan cable in my office for internet connection...


Use following steps to setup your tata photon.
1.First connect usb modem to router via your LAN.
2.now open web browser.
3.If asked for username and password, juts enter default username and password that you get with used guide.
4.Now open WAN setting.
5.Now select AutoPan.
6.Obtain DNS server address automatically.
7.Now save setting and restart your computer

Other way:
You have to use following steps to activate the modem through Account Tool:
1.First put data card in the system.
2.Now open Account tool option.
3.There you will find three option like MIN, SUB ID, SPC.
4.Now in the SPC type 000000 and press write button.
5.Now close the dialog box and restart computer. Other way: Use following steps to Install and Activate TATA Photon on your computer.
1.First connect your TATA Photon USB modem to your computer. Now wait for few minutes until drivers of your USB modem installed in your computer.
2.Now go to the device manager and check whether your modem is configured or not. Now go to the modem properties and in the advanced option type 'AT+CRM=1' . It is used to modem faster.
3.Now install the Huawei software manager.
4.Now check whether device is identified as 'HISA' or not.
5. Now go to the activate option. Now type *228 and click on the activate button.
If asked for password, just type "0000" as default password.

Dec 23, 2010 | Dell Inspiron 1545 Notebook

1 Answer

Is there a counter for the number of pages being printed?


Some please correct me if I'm wrong here ..
If it's connected to the network, obtain the IP address and open up your web browser and type in the ip address of the machine, into the address bar this will take you to the web server. I'm not real familiar with the machine, however once on the machines embedded web server should be able to find the page count as this machine allows usage tracking for users and groups, which get configured thru the embedded web server.

Oct 20, 2010 | Dell 5110cn Laser Printer

2 Answers

How can I connect wireless G print server to a 65bits windows vista without a problem, it just works for WIN XP


Hi, it appears that many are having problems with the WPS54G Print Server. I too have always found it hard to get pc to connect to it. My latest problem was with a Win 7, 64bit pc.

Setting up a printer with a print server is a two part configuration. First you need to configure the print server and then add a printer in your OS.

The following instructions are for a linksys wireless router and the linksys wirless print server model # WPS54G.

To set up the print server correctly go to this link.....http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&login=1&app=search&vw=1&articleid=4142&donelr=1

Following is the instructions from the above link:
Title: Connecting the PrintServer Wirelessly to a Wireless Router Article ID: 4142 Before configuring the wireless settings of the PrintServer, make sure to know the following settings on your linksys router: SSID, and wireless security. To check the wireless settings on the linksys router, click here.
Configuring the Wireless Settings on the PrintServer
The wireless settings of the PrintServer can be configured using its web-based utility. Make sure the PrintServer is set to a static IP on the network.

Record the Print Servers IP address you will need it later.

NOTE: Make sure the PrintServer is already working when hardwired to the linksys router before attempting to use it wirelessly on your network.
Step 1:
Access the PrintServer’s web-based setup page. Open a web-browser such as Internet Explorer.
NOTE: If you're using Mac, use Safari to access the PrintServer's web-based setup page.
Step 2:
Go to the address bar and enter the IP address you've assigned to the PrintServer.
NOTE: To assign the PrintServer a static IP address, click here.
Step 3:
When the PrintServer setup page appears, click Wireless.
Step 4:
Enter the same SSID you have on the linksys router. Make sure the Network Type is set to Infrastructure then click Save to apply your changes.
Step 5:
Click Security and look under the Security Mode field. Select the type of wireless security your router is currently using then enter the corresponding security keys.
Step 6:
Click Save to apply the settings then close the PrintServer setup page.
Step 7:
Unplug the Ethernet cable connecting the PrintServer to the linksys router. Power it off for 30 seconds then power it on.
Step 8:
Make sure the Wireless LED on the PrintServer is lit and the Ethernet LED is off to indicate that the PrintServer is in wireless mode then try to print wirelessly.

Stop if you can print at this point. If not continue. The following instructions are for Windows 7, 64 bit OS.


Once the above steps are completed open windows file explore. Click Network and you should see a "print server" listed. Click on PRINT SERVER and you will see a network icon labeled p1.

You should now be able to add a printer.

In win 7 open the add printer and click "Add a network, wireless or Bluetooth printer", and click next. A searching for printer window pops up. It will list any network printers or print servers it see's on your network. You should see a listing titled "p1 on Print Server".

At this point you need to click "The printer that I want isn't listed. This is just below the "Select a printer" box.

Next a "Find a printer by nane or TCP/IP address" window opens. Select "Add a printer using a TCP/IP address or hostname. Click next.

Another window pops up which ask for a printer host name or IP address. Enter the IP address of your print server (the one you recorded when setting up your print server), and click next.

The next windows states the device is of unknown type. Under Device Type, make sure Standard is checked. Out to the right is a down arrow, click it and you should see many different devices displayed. Scroll until you find "Hewlet Packard Jet Direct", click on it to select it and click next.

Finally a "Install the printer Driver" window should open. Select your printer and follwing the instructions. If your printer is not listed you can click "Window Update" which will look for new printer divers. Once the printer driver is installed you should be able to print.

As you can see this in not a simple printer install. Good luck!

Nov 23, 2009 | Linksys Wireless-G WPS54G Print Server

1 Answer

Am trying to set up a Windows 2003 server to serve web pages over the Internet. Have got a DSL line from Embarq. They installed a EQ-660R interface which is really build by Zyxel. I can reach the Internet...


In order to access your default web page remotely, port 80 "INBOUND" must be open to the internet.

To access your web server, two things need to happen.
The first is you or someone else must initiate a http request on port 80 using the public IP Address of your DSL connection.
Second, your router must forward that request to your servers internal ip address.

Ex. Lets say your public ip address is 24.39.45.10. In a browser window from a remote location, you enter the URL http ://24.39.45.10 The request will be sent to your router on port 80.

Your web server will not have the ip address 24.39.45.10 because it's on the private network side of your router. So, lets say the private ip address of you server is 192.168.1.100

You need to configure your router to take the http request coming from the internet on port 80 to ip address 24.39.45.10 and forward that request to 192.168.1.100. This is known as port forwarding.

You also need to configure the host header name of your "web page" so it knows it needs to display the web page.

Since we're just using ip addresses in this example and not an actual FQDN (fully qualified domain name), you would make a host header entry for the web page of 24.39.45.10.

To do this open IIS.
Navigate to the web site in question and right click on it then select properties.
On the website tab, ensure the port number is set to 80 and choose the appropriate internal ip address if you have more than one network adapter in the server.
Next click on the advanced tab and look for the heading Multiple identities for this site. This is where you enter the ip address 24.39.45.10.

If you have a fully qualified domain name, you would enter the domain name instead of the ip address as specified in this example.

Host header names are the key to running multiple websites from one physical server as long as it has the necessary horsepower to do so.

Hope this helps and isn't confising. If you're confused in any way, don't hesitate to ask for clarification.


Sep 13, 2009 | Zyxel P-660RU-T1 ADSL Ethernet/USB Router...

1 Answer

Cant connect to internet


That will be the default gateway address.
Compare the settings there, my money is on that fixing it. Otherwise it will be the DNS server Main and Secondary IP addresses.
Do you use DHCP or fixed IP's?

Apr 25, 2009 | Dell Inspiron 6400 Notebook

1 Answer

Cannot open web page through router


Try opening network connections TCP/IPv4 on your pc and add ip address manualy to be in the same number match the same as your router ie default gateway and preferred DNS Server eg 192.168.1.1 or 10.1.1.1 depending on what default the router is set on the ip address should be the same apart from the last no. eg 192.168.1.8 or 10.1.1.8 subnet mask will default to the right setting if you push the tab key after entering the ip address

Hope this helps

Feb 27, 2009 | Buffalo Technology WHR-G54S Wireless...

1 Answer

Changing a Dell 3010cn IP address and Storecenter


Print a settings page from the printer. If you are not sure on how to get the settings page, download the user manual from support.dell.com, there should be instructions in there on how to get this. Once you have the settings page locate the IP address on the print out. Take this IP address (which may be different then the one you want to use) and open internet explorer, put the IP address in where you would normally type a web address, hit enter. This will take you to the embedded web server of the printer. Once you are there, you can look for printer settings, ip address or TCP/IP address. Once you have found this, you can set a static (meaning it will not change, unless you change it) IP address (the IP address your tech person gave you) and submit the information to the printer. The printer must be on and in the ready state for this to take hold. If you are prompted for a username and password for the embedded web server, dell default username in small case is admin, leave password blank or username admin, password is password. To confirm that the address has taken, print another settings page from the printer.

Nov 14, 2008 | Dell 5100cn Laser Printer

4 Answers

DPR-1260 ... prints but cannot access web config page


To get into the web configuration you need to know your firmware on the DPR-1260. If it is 1.12, us http://dlinkps-xxxxxx where the X's are the last 6 number of the mac address. If it is 1.20 and up, use http://dlink-xxxxxx, where the x's are the last 6 number of the mac address. If you do set it up as DHCP or static and know the ip address of the print server just type in the ip address of the print server on the address bar.

Oct 21, 2007 | D-Link RangeBooster G DPR-1260 (DPR1260)...

Not finding what you are looking for?
Dell Inspiron 1525 Laptop Logo

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...