Question about Kitchen Ranges

1 Answer

Kitchenaid Superba flat top range

I was wondering if anyone has ran into an error code "F4E1" when plugging in the meat thermometer into the stove. We bought this about 4 years ago and have never used the thermomometer in the past and Murphy's law... the first time I go to use it I get the error code and the stove turns off. Any insight is greatly appreciated. Thank you.

Posted by on

  • 1 more comment 
  • halfmutt Oct 20, 2008

    I'm having the same problem with my oven. The Temp Probe light is always on and I have never used the probe. Lately the oven has a F4E1 code come up. Anybody had this problem ? Stove is a Kitchen Aid Kerc507 Oven will not function at all in either oven or convection oven mode



    Thanks

  • Anonymous Oct 27, 2008

    We have never used a temperature probe and are getting the same message. WE are unable to clear it and cannot use the oven. HELP!!!!!

  • Anonymous Mar 14, 2014

    Getting very hot on its own and will not shut off unless I turn the breaker off, it has done with twice in the past 2 weeks!

×

Ad

1 Answer

We had the same code come up today; have you gotten a solution yet. we were not using the probe however the probe it was asking to set the probe temp.

Posted on Jan 01, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dishwasher f4e1


This is an error that means the controller is not talking to the motor. You need to check the connections on the motor

Feb 09, 2014 | Kenmore 665

1 Answer

CODE F4E1 will not go away


This error means that the controller cannot communicate with the motor. It is possible that something came loose when you replaced the clamp. Recheck all the connections .

Feb 09, 2014 | Kenmore 15322 / 15324 / 15329 Built-in...

1 Answer

Kenmore elite dishwasher has an error code f4e1


I had the F4E1 code on my Kenmore Elite 665x. This means a water leak. I eventually pulled the machine from the cabinet and noticed some water beneath the machine and the water pump hose loose. I reattached the pump hose using a new hose clamp and zip tied the pump in place to keep it from happening again. Afterwards I had to reset the machine by pushing the smart wash pots and pan then normal wash in sequential order 3 times then shut the door. The machine then does a diagnostic test. After the test I pushed the cancel button and it was ready to go.
Hope this helps someone else!

Nov 21, 2012 | Dishwashers

1 Answer

Hi! I just bought a Weber pocket digital thermometer and want to know if I shall leave it in the meat in the oven during all the roasting time or insert and check once in a while? Please help.


It is not designed to be left in the meat, while in the oven. It's an insta-read type of thermometer for occasionally checking the internal temperature, in the thickest portion of the meat, while cooking. Be careful not to insert it in such a way, that it touches a bone, It will give a false reading, if it does.

I hope this helped you and thanks for choosing FixYa.

Aug 14, 2011 | Weber-Stephen Products Weber Digital...

1 Answer

I didn't use the stove at all the day before i woke up the next day and the stove has a code on it F4E1 what does this mean and how do i fix it my stove is a kitchenaid superba glass top


Short circuit detected; oven temperature sensor. Check sensor for normal room temperature resistance (1085-1097 ohms at 75 degrees F). Check wires between electronic range control (also called clock or ERC) and sensor.

VOTE FOR ME IF THIS HELPED.
LEO PONDER
IMUFO2
Replace sensor if other components check normal. Replace electronic range control (also called clock or ERC) if fail code reoccurs

Jul 29, 2011 | Kitchen Ranges

1 Answer

OK, the check engine light has been on ever since we change the alternator (for about 4-5 months ago) so just for kicks we were at the auto part store and asked for a engine check(the thingy they plug into...


OK LISTEN UP ,,YOUR CARS AIR BOX IN THE ENGINE ,OPEN IT UP ,,VERY EASY,,,THEN YOU WILL SEE A SMALL WIRE GOING INTO THE AIR BOX ,WITH A SMALL SENSOR ON IT ,,,THERES YOUR PROBLEM ,,REPLACE THE SENSOR ,,VERY CHEAP,,,JOB DONE,,,ENGINE LIGHT GONE NEXT TIME YOU START YOUR CAR,,,THESE SENSORS GET BROKE AFTER FEW YEARS .OR DIRTY ,,

Jun 18, 2010 | 2001 Nissan Sentra

1 Answer

I was given a george Foreman Lean Grill machine with a Contact Roasting Machine both in the one box as a gift about a year ago. when I opened it I noticed one of the machines had been used. someone, had...


when speaking to a friend about the missing user manual, she mentioned another friend who she thought had the same grill as I have. When further enquiries made,we found this person did have one and is sending me a copy of the manual. . I still have not solved the meat thermometer problem., but I am sure I will be able to buy something suitable , somewhere

Nov 17, 2009 | George Foreman GR30 Indoor Grill

1 Answer

Sunpentown WA-1210E


The unit is probably undersized for the space. Rule of thumb is 12000 btu per 500 sq ft. Take a thermometer and measure the entering air to the unit and then hold it in the outlet air stream you should see a temp. difference of about 10 to 15 degrees if it functioning properly. Hope this helps 2rns4u <*{{{>(

Jul 22, 2009 | Sunpentown WA-1210E Air Conditioner

3 Answers

High idle on my 1999 Saturn SL1. The mechanical screw on the idle cam is at its minimum. The car idles at 13-1500 rpms .


Clean the Idle Air Control Valve. It's on the throttle body below the Throttle Position Sensor. Worked for me! Good luck.

Sep 11, 2008 | 1999 Saturn SL

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

882 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Oloyede Monsuru

Level 3 Expert

1417 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Paul Carew

Level 3 Expert

3335 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...