Question about E-Machines eMachines Desktop PC

1 Answer

RBG error appears on screen (no signal) - E-Machines eMachines Desktop PC

Posted by on

  • 3 more comments 
  • lflowers68 Oct 06, 2009

    connections are good because it will boot in safe mode but will not boot otherwise.

  • lflowers68 Oct 06, 2009

    the computer will not but up normally. It only boots in safe mode. the last time it worked properly, it shut down with no warning and the error came on the screen when trying to restart.

  • Jaye Ellen Burke
    Jaye Ellen Burke May 11, 2010

    Have you tried to delete then reload the drivers for your video card?

  • Jaye Ellen Burke
    Jaye Ellen Burke May 11, 2010

    What does it do when booting into Windows? If the monkitor works in Safe Mode it "should" work just fine in Normal Mode also?

  • Jaye Ellen Burke
    Jaye Ellen Burke May 11, 2010

    Is the monitor properly connected to your computer? If so then possibly your video card has stopped working and needs replacement. If you go to external (not built-in to Mother Board) you might have to go into your BIOS settings to reset the video.



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

The monitor is not getting any signal from the computer. Try a different monitor and / or cable. Could also be bad video card.

Posted on Oct 07, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Connect rbg cable tv

Contact Arris Support ARRIS for Consumers

Motorola Support

Apr 23, 2014 | Motorola Audio Players & Recorders

1 Answer

1998 73" Mitsu diamond the RBG/HV Im trying to

I'm not sure that the set can handle the speed, but make sure that the sync pulse is on the green when you make the connection. Also, you must use the component input not the composite. IF hte picture ends up being purple, you will need ot change the set from YPrPb to RBG as well.

Good luck,

Apr 05, 2011 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

The display on my L675 S7048 is flickering badly. My whites turn pink, and my blues turn green. I see it when windows starts, even the Microsoft logo has tiny green dots all around it. When I connect an...

WHITE is a mixture of the three "primary" colours.
If one of the colours is not working, then WHITE turns PINK.

So, either your LCD display is malfunctioning,
or the "data" cable between the LCD and the motherboard is malfunctioning (not transmitting all 3 signals),
or the video-card embedded into the motherboard is malfunctioning (not sending all 3 signals).

This is nothing that you can fix by yourself; take your computer to a qualified technician, for trouble-shooting and repair.

Jan 19, 2011 | Toshiba Satellite L675-S7048 Notebook

1 Answer

I have an AMU monitor and i have a problem, when i turn it on it says that there is no RBG signal! and then goes into standby mode. i have tryed several other monitors on my computer tower and i get the...

There is no signal coming out. Try inspecting the video card. You can always reset the BIOS of the motherboard by removing the small battery and replacing it.

Aug 26, 2010 | Computers & Internet

1 Answer

Hooking up a laptop. rbg cant find signal . bought new blue cable for it. help!

Did you use Fn key and either F5, 6, or 7 on the laptop (depend on the brand of the laptop) to select the internal/externa/both display?

Jun 23, 2010 | Vizio L32 32 in. LCD HDTV

1 Answer

Picture gets blurred and then disappears.

christian204, Your unit may be 5 -6 years old, and may have developed a problem with it's internal "switch-mode-power-supply" and will need good CCFL backlit lcd monitor tech to repair it. When strange and wierd things start to occur on lcd screens the first place to look would be the SMPS. 12fixlouie

May 11, 2010 | LG Flatron MW-30LZ10 30" LCD Monitor

1 Answer

Video out settings changed to RBG;Complete loss of signal

RGB is componet, you need to turn on the PS2 with the disk tray open or no game in it and go to system settings and change it to

which is composite.

Feb 01, 2009 | Sony PlayStation 2 (PS2) Console

2 Answers

When I plug in RBG cable to laptop, it crashes

i need for a msr206 24VDC /-10%, 2.0A Max., external power adapter attached

Dec 17, 2007 | Focus Enhancement i-Tview Gold (444-6201)

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Alun Cox

Level 3 Expert

2678 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides