Question about Elite Rubbermaid Frameworks Outdoor Storage Shed - 8.6 x 11

Open Question

Need a big max door latch part #HIP-046H - Elite Rubbermaid Frameworks Outdoor Storage Shed - 8.6 x 11

Posted by on

  • 3 more comments 
  • mamaparrot Oct 07, 2009

    Yes the place where i bought the shed told me to contact rubbermaid.com. When i do that i get the reply from rubbermaid, no item found !

  • mamaparrot Oct 07, 2009

    yes i have gone back where it was purchased, they tell me to contact rubbermaid.com. When i go there and enter the part number i get the reply no item found.

  • mamaparrot Oct 09, 2009

    Hi again, well when i call 1-888-895-2100 i get a message thats says "your call can not be connected as dialed" so i tried three more times and got the same message each time.

  • Chuck
    Chuck May 11, 2010

    Have you tried going to the store where you purchased it or contacting Rubbernaid direct?

  • Dan Abramovich Dec 16, 2012

    Check out my answer to this problem here:http://www.fixya.com/support/t2892873-ru...

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Rubbermaid Shed: Broken Latch (Part # HIP-046H)

Got to Rubbermaid's replacement part link below and fill out the form. Let them know that you need to replace an HIP-046H latch.

http://www.rubbermaid.com/SupportCenter/Pages/ContactInformationForm.aspx?ContId=72&Id=4

I filled out this form and received a better, metallic replacement latch in about 10 days. Hope this helps.

Dan A.

Posted on Dec 16, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you make shelves for Rubbermaid Large Storage Shed HIP-046H?


Hi, I would use 3/4" plywood and build a Horseshoe type structure at the desired height then place it on a lower shelf, place another shelf on top of it.

good luck

Jul 13, 2014 | Rubbermaid 3746 Taupe/Green Large Vertical...

1 Answer

Why do no panel lights turn on when my Kenmore Model 587.1625 is latched and ready


The door latch in Kenmore and Kitchenaid isn't of the best design.The spring steel latching tab is needs to push down the black plastic slide mechanism when the door in closed. That slide pushes down on a micro switch which interrupts the cycle when you open the door when the dish washer is running. Take the latch assembly back out. You can insert two compression springs inside the slide on each side of the latch. They are approx 3/16 Dia x 3/4 to 1 inch long. In the hardware dept at Home Depot or Lowe's..The springs will push the slide down hard enough to activate the switch. Right now your dish washer thinks the door is open.

May 17, 2014 | Dishwashers

1 Answer

Amana big oven


use a fulcrum in both hinges (dowel across the oven) to gently bend the thing back in to shape. not a lasting solution, but should be god for a few years.

Oct 15, 2013 | Ovens

1 Answer

Latch at bottom of 3rd door will not open


Pull the Door Handle on the INSIDE of the REAR DOOR, Pull HARD... THEN PUSH IN on the door and then pull back. Mine releases with a Bump of my hip. This is a common issue with these trucks. If you can not get it loose that way, then use a flat screwdriver once you pull the handle to get it to release. You can adjust it to make it work normally,,, I am just too lazy to do mine

1997 Silverado

Apr 12, 2013 | 1999 Chevrolet Silverado 1500

1 Answer

Matyag dryer door won't latch. How do we remove them?


No model numba gotta shoot from the hip:
themobilian_3037.jpg
Part numba 279570
Just yank out the old latch with pliers.
Snap in the new OR post yer model numba fer a mo precise answer.

Sep 30, 2011 | Dryers

1 Answer

Rubbermaid Shed: Broken Latch (Part # HIP-046H)


Got to Rubbermaid's replacement part link below and fill out the form. Let them know that you need to replace an HIP-046H latch.

http://www.rubbermaid.com/SupportCenter/Pages/ContactInformationForm.aspx?ContId=72&Id=4

I filled out this form and received a better, metallic replacement latch in about 10 days. Hope this helps.

Dan A.

Sep 06, 2009 | Elite Rubbermaid Frameworks Outdoor...

1 Answer

I have a Kenmore Elite HE4.THe door will not stay shut. It doesn't click anymore when I push the door to close it. Any ideas?


The catch side, not the latch side, the catch on the frame may have backed off some what. It's not unusual for this to happen over time. Take a peek around the catch and see if there are any adjustment options such as two slots where the mounting screws are, a hex key slot behind it to adjust the reach and so on.With a flash light close the door very slowly and from above as best you can see if the spring fed latch is near enough to the catch. Also try hip checking the handle to try closing it.If then it latches you may have a section of seal gasket that is misplaced or swollen. See, not being there makes this a very difficult call. I've given about the most options I can think of and I hope for you guys that one of them works. Also if your closer latch is similar to the operation of a screen door latch, don't be afraid to pry the latch lightly in the direction towards the catch/latch. Good luck and Thank you, Dana

Aug 26, 2009 | Kenmore Elite HE4 Electric Dryer

2 Answers

Power Sliding Doors


clean out both tracks,they are dirty

Apr 22, 2017 | 2009 Chrysler Town and Country

1 Answer

Doors wont open


You can temporarily unlock the door by accessing the latch from the inside of the car, and forcing the latch to open with a big screwdriver.

If it gets stuck again, then you will need to replace the door latch.

Oct 23, 2008 | 1995 Jeep Cherokee

1 Answer

Maytag dishwasher latch


If it like mine, the latch is out of adjustment and you need to give it a whack with your hip to start it. If I adjust the latch looser, it leaks.

Oct 24, 2007 | Maytag 24 in. MDB8600AW Jetclean II...

Not finding what you are looking for?
Elite Rubbermaid Frameworks Outdoor Storage Shed - 8.6 x 11 Logo

Related Topics:

1,632 people viewed this question

Ask a Question

Usually answered in minutes!

Top Elite Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

john h

Level 3 Expert

12104 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you an Elite Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...