Question about Canon PC1061 Copier
I believe that an e100 is a laser unit problem. laser will need to be replaced.
Posted on Oct 17, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
E100 means the copier is not warming up.Make sure all the wires to the fuser are properly connected, then open and close the front door.you may have to go into the service mode to reset the error code.Good Luck
Posted on Mar 26, 2009
SOURCE: Copier ir 2016 system error E100
first replace the drum (i.e the photoconductive cylinder)
I wish you solve the problem.
thank you and not forget to vote me any how.
Posted on Jul 15, 2009
E-100 is an error of the Laser Beam detect PCB. Either the laser unit is not working or the beam detect PCB is not detecting the beam. You can't see the beam so don't try. Since you are also getting a E-220 which is a Scan Lamp error. Most likely cause is a ribbon cable between the CCD unit and Image Processor PCB. You may need a tech to trouble shoot this problem
Posted on May 20, 2010
Tips for a great answer:
Jun 27, 2016 | Canon IR 3300 Digital Copier
Oct 25, 2009 | Canon imageRUNNER 1600 Laser Printer
Jun 02, 2009 | Canon iR 2020i Laser Printer
May 16, 2009 | Canon imageCLASS MF8180C All-In-One Laser...
129 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: