Question about Maytag Neptune MAH7500WH Front Load Washer

2 Answers

Speedindication error on MAH7500AWW

I have tried to reset the system by unpluging the machine and pluging it back up but I get an error message: Speed Indication Error. Is this something that need to be replaced?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 790 Answers
Re: speedindication error on MAH7500AWW

Guess the problem is with the motor control board ... contact ur customer care for support ...

Posted on Dec 23, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 89 Answers
Re: speedindication error on MAH7500AWW

These machines are "known" to have computer board problems. When replacing the comp. board it is best to replace the motor as well because you can buy them in a kit toghter. (part# 22004473) cost around $150.00 ... GOODLUCK

Posted on Dec 23, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

5 Answers

Hotpoint aquarius washing machine wf nstopped in middle of programme error message won't restart

First try unplugging the machine.

Then try emptying the machine, unplugging and running a small load.

Sep 03, 2008 | Hotpoint Washing Machines

1 Answer

I have a 300 Series Bosch front load washing machine witn an E:27 error message. I can't get it to reset. What is wrong?

Do you know what the E:27 error code means? Different machines have different codes. I am not a bosch expert, but if you provide the complete model # to your machine chances are good that i can find the meaning of that error code and maybe a whole lot more.

Jan 06, 2013 | Bosch Washing Machines

1 Answer

I need owners manual for maytag washing machine modile mah7500aww. Maytag web site has parts repair list pdf. only.

i am not finding a link on for that manual. However here is where ya can go for a very good setcion by section breakdown of part numbers complete with drawing


Aug 20, 2011 | Washing Machines

1 Answer

DE error problem

Hello this is the link direct from LG if your unit is an LG on the DE error message sometimes you can get the error to clear by unplugging the unit for 7 minutes which causes the control to reset if it reappears then you would have to replace the door lock assembly in the unit. If you have any further questions message me back Thanks Rick
basicly means the door lock has not cleared in the home position usually it will reset by unplugging the 7 minutes

Aug 15, 2011 | Washing Machines

1 Answer

Frigidaire-washer Error Code E31 What does this mean?

It would seem that these newer washers respond much like a computer. If you have not tried it, and this works for multiple error messages, unplug your machine, wait ten minutes and plug back in. Often this resets the board and your error will not reappear.

Feb 28, 2010 | Frigidaire ATF6000ES Front Load Washer

3 Answers

Maytag Neptune MAH7500AWW Speed Indication Error - Won't spin up...

Sorry, I cannot solve this. I just wanted to post a couple of useful tips for anyone else out there who happens to be diagnosing their MAH7500AWW.

1. You can put the washing machine into service mode by pressing the <back> and <help> buttons for 5 seconds and then releasing.
2. There is a large folded troubleshooting schematic located under the top console. You have to remove a few screws and lift it up to pull it out.

Sep 19, 2008 | Maytag Neptune MAH7500WH Front Load Washer

3 Answers

LG Washer dryer error dE

Unplug the machine.

Plug back in (maybe 10 seconds later).

Mine had several dE messages. Unpluged, waited 10 seconds, when pluged back in, it remembered which cycle and parameters I had it on, then locked the door and continued with no problem.

Mar 17, 2008 | Washing Machines

1 Answer

Speedindication Error

Yes, The motor and motor control board are not talking to each other. The motor has a built-in tach that signals the board as to its' position and speed. One of the two is faulty. This is an expensive repair. Parts will cost between $225 and 325 depending on where you are. Make sure the repair tech has a good reputation before proceding or do it yourself.

Dec 23, 2007 | Maytag Neptune MAH7500WH Front Load Washer

Not finding what you are looking for?
Maytag Neptune MAH7500WH Front Load Washer Logo

383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides