Question about Acer (91.AD275.014) 120 GB Hard Drive

1 Answer

I think it went out,i turn the cp on and you can just hear the fan

Posted by on

  • Norman
    Norman May 11, 2010

    do u see any cmos prompts on your screen when it boots, like the company logo your comptuer is from? or any writing?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 171 Answers

Try it on a differnt connector inside your computer
Is there no clunking sounds?

If it is a second HD does it appear under your operating system?

Boot your operating install software - see if it finds that HD

If it is dead there a re a number of ways of getting to it.... if the data is not massively vital

Tap the HD with your fingers - it may just be jammed
reboot
if not
wrap it in a bag and freeze it for about 15 mins
reinstall quickly and try

These solutions will only work for a very small amount of time.

Recovery costs from about £30 / $60 for an examination to see what the problem is

Posted on Oct 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Hitachi CP-S860 projector that we replaced the lamp in 8 months ago. Now it powers on and the lamp comes on, but after about 2 minutes the lamp shuts off and you can hear the fan stop working...


Hi dear, This is ballaster board problem.If proper voltage is not going to lamp means this will occur.so, change ballaster board.I hope this is helpful for u

Aug 11, 2011 | Hitachi CP-S860 Multimedia Projector

1 Answer

I have a Hitachi CP-X417 projector that keeps blowing lamps. Smells like something is getting extremely hot.


It sounds like you may have a broken or inefficient / blocked cooling fan. Check the air filters and make sure it is very clean and dust free. Also listen to hear if the fan is running at what you think is a normal speed - not irregular or start / stop. If this is all ok then it may be an issue on the d.c power supply to the fan - don't spend more money on a bulb until you check this out.

Mar 18, 2011 | Hitachi CP-X417 Projector

1 Answer

When I turn on the CP-X251, the fan cycles several times and then the overheat light illuminates. Only takes about ten seconds...


have you checked the filter. is there any blockage to air flow. is the machine mounted upside down

Mar 03, 2011 | Hitachi CP-X251 LCD Projector

1 Answer

How to troubleshoot a computer


it depends on what you think the problem is first you take out the memory and listen for a beeb if you here a beep your memory is good your fan on your proccessor is running you are ok there then take off the fan and cleanit with a hair dryer and toooth brush use the hair dryuer on the power supply after turnining on the cp with the procssor fan of barley touch the processor to see if it hot if it is the the processor is in good shape then close every thing up and go to freewarefiles .com and download cp testing program and cp info program. freewarefiles is a great place for tools and learning software anitvirus and andvace system care 3 will solve alot of your pc problems

Jun 25, 2010 | Dell (E210882) Motherboard

1 Answer

Machine powers down and no lamp.


one of the fans may not be working properly or the ballast is shot.

Nov 10, 2009 | Hitachi CP-S860 Multimedia Projector

1 Answer

Fan Model CP 943OR--remote will not turn fan on


Check for dust or film on the pickup sensor on the fan itself.

Jun 13, 2009 | Hunter 22890 52'' Low Profile Plus Antique...

1 Answer

4805 w/less than 300-400 hours has blinking red light


Yikes. I bet the bearing is bad in the fan and/or the fan is rubbing up against something. It might be an fix.

Jul 16, 2008 | InFocus ScreenPlay 4805 Multimedia...

2 Answers

Sony Grand Wega 50" LCD


What is model no of your tv, I think, there maybe a modification for it

capital98

Nov 30, 2007 | Sony FD Trinitron WEGA KV-32FS120 32" TV

Not finding what you are looking for?
Acer (91.AD275.014) 120 GB Hard Drive Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

633 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...