Cannot instal printer on XP system

Use BJC 50 driver from Windows driver updates, works fine

Nope. Canon BJ-30 is not a color printer.
It is same as BJC-70 but only the color printing ability is not available in it.
BJ-30 is Black & White inkjet printer with max 360x360 dpi.
Hope this helps.

Check on Canon.com, for the users manual, When you install cartridges you hold the resume button for the number of beeps to identify which cartridge is installed. You can install one black ink or one each black and color but you have to tell the printer which is installed.

you need the printer driver for vista in order to be able to print out. But Canon does not offer drivers for XP and Vista for bjc-80, however you can manually install the driver for BJC-85 and get the printing function going, but the scanner cartrige does not work through USB.

BR
Bruce

Any hardware that is made for a pc that you purchase, you go the the site of the maker, and usually you
enter the model# and get a list of options, pick download, and you should see the software driver
for xp and vista. When you install the software and it tells you to plug in the printer, windows driver installer will pop up and say found new hardware, would you like to install driver, most times you need
to shut this down,close the box so that windows does not install a windows generic driver.
When you shut down the windows box,the software should install the canon driver.

I was going to post the page that the driver was on, but the model# you listed does not show on there site, I tried- BJ I6500
BJI 6500
6500
and nothing come up, please check again to make sure that you are looking for the right model #,
hope you find what you need, and here is the main site.


http://www.usa.canon.com/consumer/controller?act=ProductCatIndex1Act&fcategoryid=103

canon s6300 drivers here

http://software.canon-europe.com/products/0000603.asp

please select correct operating system

Download the latest Canon BJC-2000 Printer Driver for Windows 2000/XP, but  Before starting this driver installation i suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 2000/XP

http://www.dirfile.com/canon_bjc_2000_printer_driver_v_1_50_for_windows_2000_xp.htm#

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=329&modelid=6729



follow this link and in the drvers/software selection choose your OS....Wait a few second and you'll be transfer into the driver area. Download the driver. Be sure to install the driver before connecting your printer to your PC.

http://www.driverskit.com/Printer/Lexmark.html

visit the website.. download the driver for your printer...

Try going on line to download.com website to download the drivers for your printer.