Question about Hitachi DZ-MV550 DVD Camcorder

2 Answers

Iv lost the software so cant transfer from camcorder to computer

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Havent fixed it but with your prices ill manage alone

Posted on Oct 06, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Lost software for the cam. can i download software on line? what's the url. again my computer's dvd rom can read from the cam's disk, of which i have a footage on.

Posted on Oct 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Recover lost videos from JVC Everio GZ-MG630AU camcorder


I'd recommend that you take a look at this camcorder data recovery guide that helped me last time:
Recover deleted videos from camcorder
the guide successfully get back deleted videos from JVC camcorder, hope that it helps you too.

Jan 01, 2013 | JVC Everio GZ-MG630 Hard Drive Camcorder

1 Answer

I have an Everio GZ-MG130E Camcorder but I've lost the software when my computer crashed Where can I download so that i can transfer the film of my daughters wedding to my computer.


Hi Antonius,

Welcome to FixYa.

Unfortunately, JVC does not provide the complete software for download. You will have to purchase the software by contacting JVC support in your country.

But, you can transfer the files to your computer without installing the software as shown in the below images:
9_17_2011_11_00_12_am.png
9_17_2011_11_00_38_am.png


Hope this helps. Thanks for using FixYa

Sep 17, 2011 | JVC Everio GZ-MG130 Camcorder

1 Answer

I lost my driver for my sony handycam DCR-DVD608, i cant transfer the video i got from my handycam to my computer. how can i get a driver for this? is there a free download? ty!


i lost my driver for my sony handycam DCR-DVD608E, i cant transfer the video i got from my handycam to my computer. how can i get a driver for this? is there a free download?

Aug 26, 2011 | Sony DCR-DVD608E DVD Camcorder

1 Answer

I LOST MY CD ROM CAN I GET ONLINE


It is not required to use any driver or software to transfer videos from the Camcorder to the Computer.
Once you connect the Camcorder to the Computer, you will get the DVD disc in the Camcorder as an additional drive under My Computer.
You can find the Video_10 folder under the drive and copy it to the Computer to transfer the videos.
However, there are some occasion, computer may ask driver when connecting the Camcorder.. It may be due to genuine driver incompatibility..
In these type of situation, you can finalize the disc in the Camcorder and insert it in the CD/DVD drive on the Computer to transfer the videos.
You can use any software which you used to playback the commercially produced discs to playback the videos from the disc.
If you need any assistance regarding this, you can direct reach me by clicking the following link.
www.fixya.com/users/shajanrs

Jan 18, 2011 | Sony DCR-DVD703 DVD Handycam Camcorder

2 Answers

I lost my CD-ROM for DCR_TRV260 sony digital8. and i need to transfer video to PC


I'm sorry to hear that you lost the supplied CD with the Camcorder. Unfortunately, it is required to install the driver and software from the supplied CD to transfer videos through USB interface for XP OS.
This is not the case if you're using an OS which is higher than XP ( like Vista, Windows 7). In the case of Vista and Windows 7, the Camcorder has no drivers available for USB interface. Hence you can use the either i.LINK or A/V interface to transfer the videos.

Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).


IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.


i.LINK Cable.


shajanrs_8.jpg


i.LINK port.


shajanrs_9.jpg

  1. Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.


Please click here to ask questions directly to me if you need any clarification.

Jan 13, 2011 | Sony Handycam DCR-TRV260 Digital Camcorder

1 Answer

Cant transfer videos to pc


Option 1:

If you want to use the USB cable to connect the Camera to the Computer to transfer the video to the Computer then:

(Applicable for Vista Operating System Only.)

This Camcorder does not support USB streaming with the VISTA Operating System. Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port. (An i.LINK is a black D shaped connector with 4 or 6 pins. The type of cable to be used will depend on the i.LINK port of your Computer. The Sony Camcorder will have the 4 pin i.LINK cable and if the computer has the 6 pin i.LINK port, then you may have to use the 4 pin to 6 pin i.LINK Cable).

You can use any video capturing software like Windows Movie Maker to transfer the video from the Computer.

Refer this Link for the instruction to transfer the video to the Computer using i.LINK cable.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893

NOTE: As the Camcorder does not support USB streaming with Vista, it is not required to use any Sony Device Driver to transfer the video to the Computer. You do not require any Drivers or Software from Sony to transfer the video from the Camcorder to the Computer using the i.LINK/Firewire interface.

Option 2:

(Applicable for Windows XP Operating System only):

If you are using a Windows XP Operating System then you have to install the USB Streaming Driver in the Computer from the supplied Software disk with the Computer.

Check this Link for the instruction to transfer video to a Computer using USB Streaming.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C222820

If you do not have the supplied Software disk then I suggest that you use the i.LINK cable to transfer the video.

Option 3:

If you are using an i.LINK cable then:

The Camcorder will flash the DV IN message as soon as the i.LINK/Firewire cable is connected to the Camcorder.

If you are getting the DV IN message then it indicates that the Camcorder recognize the connection.

If you are not getting the DV IN message as soon as the i.LINK cable is connected with the Camcorder then the issue may be with either the Camcorder or with the i.LINK cable.

Try resetting the Camcorder or try with different i.LINK cable. Locate the RESET button behind the LCD screen of the Camcorder. (You will be able to locate the RESET button by opening the LCD Screen. The Camcorder should be switched ON when you reset the unit. Press the RESET button using a sharp-pointed object).

NOTE: Resetting the Camcorder will reset the settings of the Camcorder to the factory settings including date and time. It will not delete any data saved in the Camcorder.

If the issue still persists after resetting the Camcorder and with different i.LINK cable then your Camcorder requires service to resolve the issue.

Good Luck!!!!!!!!!!!!!!!

Sep 17, 2009 | Sony DCR-TRV285E Digital-8 Digital...

1 Answer

Cant veiw recoreded tape on computer


you need ilink or firewire cable and firewire port on your pc. the sony usb driver is just for the memory stick. check this link:

http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&productId=11040679

Apr 06, 2009 | Sony Handycam DCR-TRV33 Mini DV Digital...

2 Answers

How to connect my jvc mini dv camcorder to my computer without the disc


can you pls tell me the exact model of your camcorder? so that i can i help you

Sep 07, 2008 | Video Cameras

1 Answer

Communicating with iMovie


hahaha me to guys.... plug it into m macbook and i get nothing...

iv got final cut + imove HD (Better than imovie08) and cant import anthing...

On the cannon website it says there are no driver downloads for the camera altho when i downloaded the instructions it says:
"Optional software is required for transferring recordings
from the tape to a computer. Refer to the instruction manual of the software."

Anyone?

bet its somthing really simple :/

Sep 25, 2007 | Canon MV700 Mini DV Digital Camcorder

2 Answers

How to connect my jvc mini dv camcorder to my computer without the disc


you have not mentioned which model JVC camera you have bought, any ways, if it has with both memory card and minidv cassette facility, then you require a fire wire card to transfer cassette contents, and for stills on card insert the card to the slot and then connect it to the computer through USB cable, then the computer will recognise your camera.

Aug 11, 2007 | JVC GR-D370 Mini DV Digital Camcorder

Not finding what you are looking for?
Hitachi DZ-MV550 DVD Camcorder Logo

447 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Video Cameras Experts

yadayada
yadayada

Level 3 Expert

74975 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

PNiss

Level 2 Expert

150 Answers

Are you a Hitachi Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...